CHOCOLATE MOUSSE AND BISCUIT DESSERT

CHOCOLATE MOUSSE AND BISCUIT DESSERT

Author: Justyna Kowal

Skill level: BEGINNERS 

You will need:

  • Saracino raspberry food flavouring La Supreme
  • Saracino vanilla food flavouring La Supreme
  • Saracino milk chocolate drops
  • Saracino dark chocolate mirror glaze
  • Saracino gold push pump powder
  • Saracino gold glitter
  • butter
  • icing sugar
  • sugar
  • cinnamon
  • egg
  • plain flour
  • double cream
  • gelatine
  • Rice Krispies
  • plums
  • pectin (jam sugar)
 

Step 1

Prepare all your ingredients. Make sure they are all at room temperature. For the equipment you will need a small pan, spoons, 2 silicone moulds (one for the centre and one for the heart mousse), baking paper, food mixer, blender, circular cookie cutter, silicone spatula, piping bag, rolling pin, cup, sugar thermometer, wood skewers, sieve and a kitchen scale.  

Step 2

Add 250g plums to the pan.

Step 3

Cook and blend plums until a smooth consistency is achieved. 

Step 4

Add a table spoon of sugar, a tea spoon of pectin and a tea spoon of La Supreme vanilla flavouring. Bring to the boil for a few minutes stirring the mixture so it does not burn.  

Step 5

Pass the cooked mixture through the sieve to remove any lumps and plum skin.

Step 6

We will be using this mixture for the centre part. Fill the small mould and freeze. 

Step 7

For the cookies (base) prepare 170g plain flour, 20g icing sugar, tea spoon of cinnamon, 1 egg, 100g soft butter. Put the oven on to 190C

Step 8

Place all the ingredients in the bowl

Step 9

It is important not to over knead mix. The ingredients just need to be combined.

Step 10

Roll the dough and cut the circles using your cookie cutter

Step 11

Bake at 190C for about 10-12 minutes until a gold colour is achieved. Cool them on a rack.

Step 12

Now to get the ingredients ready to make the mousse. You will need 150g milk chocolate drops, 2 tea spoons of gelatine, 700g double cream, half a tea spoon of cinnamon, Vanilla food flavouring La Supreme. 

Step 13

Pour 200g of cream into a pan, add chocolate drops, cinnamon, and a tea spoon of vanilla food flavouring. Heat and stir until the chocolate is fully melted. 

Step 14

Add 2 tea spoons of gelatine to a bowl and add 2 table spoons of cold water. 

Step 15

Add the melted gelatine to the pan with the chocolate. Stir and let it cool down. 

Step 16

For the base of our mousse prepare 150g of milk chocolate drops and 20g of cornflakes 

Step 17

Melt the chocolate in the microwave or over a water bath and allow to cool down. 

Step 18

Add cornflakes and stir quickly. 

Step 19

Pour the mixture on to a sheet of baking paper, flatten and put into the fridge. 

Step 20

Allow to set and then remove from the fridge to cut circle bases. You want the base to be slightly smaller than plum mixture circle. 

Step 21

For the mousse pour 500g of double cream into a bowl and mix until it has thickened.

Step 22

Get the chocolate and spatula ready 

Step 23

Add half of the cream into your chocolate and using your spatula stir. 

Step 24

Add the other half of the mixture and stir

Step 25

Pour the mixture into the piping bag

Step 26

Add to the heart shaped moulds up to two thirds height in the mould. 

Step 27

Remove your frozen plum mixture and get the crunchy bases ready. 

Step 28

Add the frozen plum mixture to the mousse. 

Step 29

Add the crunchy base over the plum mixture and gently press. 

Step 30

Pipe more mousse mixture to fill each mould. Place in the freezer.

Step 31

Place your cookies on the mini cake boards. You can add a bit of jam at the bottom to stop them moving. 

Step 32

Prepare your mirror glaze, gold pump spray and glitter.

Step 33

Place a sheet of foil on your table and position your cooling rack over. Place the frozen hearts on the rack. 

Step 34

Heat the mirror glaze to a temperature of 40C. Heating slowly. Pour heated mirror glaze over each heart making sure they are fully covered. 

Step 35

Using your wood skewer keep moving the hearts over the rack to remove any excess mirror glaze. Then place each heart on a cookie. 

Step 36

Decorate using Saracino gold pump spray and gold glitter  

CHRISTMAS SURPRISE  BOX

CHRISTMAS SURPRISE BOX

Skill level: BEGINNERS

You will need:

  • Cake or dummy 20x20cm

  • Saracino white chocolate drops 

  • Cream for ganache
  • Saracino white Pasta Top (sugarpaste/fondant for cake covering)

  • Saracino CMC

  • Saracino Cake Gel Glue

  • Saracino concentrated colour gel green, red, brown, yellow and black

  • Saracino Push pump glitter dust red

  • Saracino powder food colouring brown,pink and yelow

  • Cake drum

  • Soft brushes

  • Cocktail sticks

  • Modelling tools

  • Ruler

  • Fondant knife

  • Set of round cutters

  • Smoother

  • To download the template click on the picture below

Step 1

Cover cake with ganache made using Saracino white chocolate drops and cream

 

Step 2

To achieve the colour we need for the cake covering mix Pasta Top sugarpaste with yellow and brown gel colour. 

Step 3

Keep adding the yellow and brown gel colours to achieve beige colour. Always start with a small amount of gel colour. It easy to add more if you need but more difficult to take off 

Step 4

To cover the top of the cake roll out Pasta Top sugarpaste/fondant and cut out a square the same size as your cake. Place on top of the cake.

Step 5

For the sides of the cake roll out Pasta Top sugarpaste and cut out 4 pieces to the size needed for your sides. You will need to make each side higher than your cake to form an open box look.

Step 6

Cover each side with sugarpaste. 

Step 7

Using muesli or rice krispies melt in the microwave with marshmallow to make a modelling material. Careful not to put the marshmallow in the microwave for too long as it will burn easily. Print off your template.

Step 8

Using the template form the body of the gingerbread man 

Step 9

Follow the same steps to form the head

Step 10

Ganache the body and head. Colour the sugarpaste with brown and roll it thinly. Cover the body.

Step 11

Cover the head with the same brown paste. It may look lighter in this picture but that is just due to camera and lighting angles. Using your modelling tools form the smiling mouth.

Step 12

For eyes shape black sugarpaste into teardrop shapes. Roll them to achieve the shape on your printed template. 

Step 13

Using white sugarpaste add a bit of effect as shown.

Step 14

Fix eyes to the face. Make a nose using red fondant. For the cheeks shape two hearts using pink fondant.

Step 15

Using a cake smoother roll out a thin sausage with white sugarpaste

Step 16

Attach it to the top of the head creating a wave of snow

Step 17

Using your modelling tools create a deeper smile. Fix the black tongue. Position your nose on the face to see if it the correct proportion. Do not fix yet!

Step 18

Roll out black to a thin sausage shape and insert to define the mouth and eyebrows. Fix the cheeks.

Step 19

Make a bow with red fondant and decorate with white dots. Use your template to achieve the bow size and shape. Use a small amount of red paste to colour the tongue.

Step 20

Remove the nose from the face and spray with Saracino pump-up red glitter 

Step 21

Also spray the bow and put aside

Step 22

For the gingerbread man arms add cmc to a small amount of brown sugarpaste. Shape to the arm size on your template. 

Step 23

Roll thin sausage using white sugarpaste and create waves on the ends

Step 24

Attach the nose and dust the cheeks with pink powder colour. Fix the head to the body using edible glue and cocktail sticks.

Step 25

Using black powder colour shade the eyes

Step 26

You will now need yellow, blue and red baubles. You can use pre-coloured paste or add gel colours. When you are ready add a little CMC to each colour.

Step 27

Roll out the sugarpaste and cut a circle 

Step 28

Using your finger or thumb smooth the edges of the circle 

Step 29

Keep it nice and circular as shown. Now repeat for the blue and red.

Step 30

For the Christmas lights add CMC to yellow sugarpaste and roll teardrop shapes. 

Step 31

Repeat for blue and red lights. You will need a few of each colour. You can decide how many lights you would like.

Step 32

For one bigger Christmas bauble roll green paste into a ball

Step 33

Shape it into a cone

Step 34

For the upper part of the Christmas bauble mix white sugarpaste with black gel colour to achieve light grey. Then roll it and cut a strip.

Step 35

Cut out the shape shown for the top of all the baubles

Step 36

For upper part of larger Christmas bauble knead some grey paste with cmc and create a ball. Flatten it with your fingers and make two groves with modelling tools. 

Step 37

Fix them to the top of each bauble using a little edible glue. This is how they should look

Step 38

To make little hangers roll out black paste into a thin sausage and fix to the upper part of the Christmas baubles.

Step 39

Using white fondant roll some lines and add to the baubles 

Step 40

To make the candy canes roll a thin sausage shape using white and red paste. Both sausages need to be the same diameter.

Step 41

Create a hook shape at the top of each cane.

Step 42

Using a sharp blade cut both in small diagonal regular pieces. Connect together using small amount of cake gel or a little water. You need to alternate the red and white to form the candy stripe as shown.

Step 43

Using yellow powder colour shade the edges of the yellow bauble. Use a modelling tool to form lines in the top grey piece of each bauble.

Step 44

Repeat with other baubles and Christmas lights

Step 45

Using red powder colour add some shading to candy cane 

Step 46

Mix brown, yellow and orange powder to dust the box corners.

Step 47

Your box should look like this.

Step 48

Now for the open lid of the box. Using the same sugarpaste used to cover the box, roll it and cut a smaller rectangle with the width matching the front of the cake. Shade the edges and fix to the cake to make the ‘open box’ effect

Step 49

So it looks like this when fixed. Repeat for the three other flaps of the box. Allow to go hard the CMC will help this. 

Step 50

Position and fix your gingerbread man to the top of the box. Now fix one arm. You can use edible glue and if needed a cocktail stick.

Step 51

Colour the Christmas bauble with green glitter and add a line of white sugarpaste. Fix the green bauble to the arm and body.

Step 52

Fix the other arm so it is in a position where it looks like it is holding the large green bauble.

Step 53

Fix the bow to the top of the head.

Step 54

Add the Christmas baubles inside the cake 

Step 55

Roll a thin green line and create the light cable. Fix on the cake as shown. 

Step 56

Cover the cake board with red sugarpaste and sit the cake on the board  

Step 57

We have used a mould with green fondant to create the greeting. Fix to the side of the cake.

Step 58

Add the candy canes. The canes can be decorated with holly if you want to add more detail. Extend your Christmas lights onto the board as shown.

Once the sides of the box have set fix them to the top of the open box. You may need to support the flaps temporarily whilst they dry into an open position as shown.

Step 59

Your cake is ready!

CHRISTMAS COOKIES CAKE

CHRISTMAS COOKIES CAKE

Skill level: INTERMEDIATE

TIP – You can cover your two tiers with Saracino Pasta Top. To learn how to cover your cakes and create sharp edges follow the link

HERE – for picture tutorial 

HERE – for video tutorial 

You will need:

  • 2 dummies of 15 and 20cm or 2 cakes (you can make a cake decorated with cookies or simply present the cookies in a more original way, on the dummies instead of on a classic tray)

  • Cake drum

  • Saracino fondant Pasta top to cover dummies or cakes

  • Saracino Royal Icing Mix

  • Sieve

  • Corn starch

  • Rolling pin

  • Baking paper

  • Piping bag

  • Number 1 piping nozzle

  • Scissors

  • Pencil

  • Micro-perforated mat

  • Snowflake cutters

Step 1

Sprinkle the work surface with corn starch to roll the fondant and keep it from sticking.

Step 2

Place the layer of fondant on a cake drum that has a small amount of water so that it sticks.

Step 3

Trim excess edge.

Step 4

Roll out more Saracino Pasta Top and cover the dummies or cakes. Remember to always sprinkle the work surface before rolling the fondant so that it does not stick. Remember to also moisten the dummies or cake so that the fondant sticks. No need to over wet it, just moisten it lightly.

Step 5

Smooth and apply the fondant to the surface of the dummy or cake using cake smoothers. Trim off the excess from around the bottom.

Step 6

Don’t worry if the surface isn’t perfect. The imperfections will be covered for the most part by the decoration that we will make with the cookies.

Step 7

Place one tier on top of the other. If you have used dummies, just stick them together with a little corn syrup (you can include a cocktail stick or dowel to fix it better). If you are using real cakes, remember to place a cake board beneath the top tier and use dowels for support.

Step 8

Draw little houses on the baking paper. Bear in mind the height of your tiers and decide on the sizes you would like.

Step 9

You can make as many shapes and sizes as you want but remember that you can repeat patterns (otherwise you will spend a lot of time cutting out shapes). You must bear in mind that you should not make them excessively wide so that they adapt better to the curvature of the cake.

Step 10

Cut out the little houses that you have drawn

Step 11

Roll out the cookie dough to an even thickness (5mm thick). Place the shapes you have cut out on the cookie dough. You can use the classic shortbread dough, gingerbread cookie dough, honey cookie dough … But don’t forget that the dough must always be very cold to handle.

Step 12

Cut the houses using a sharp blade.

Step 13

Place the cut cookies on a cookie sheet with a micro-perforated mat and put them in the freezer for 5-10 minutes. This will prevent them from losing their shape during baking. Meanwhile, preheat the oven to 180ºC (356 ° F).

Step 14

Also cut some snowflakes and do the same, put them in the freezer for a few minutes.

Step 15

Don’t throw out the dough scraps! Knead them again (not too much so that the gluten does not develop and the cookies are puffed in the oven) and roll them again. Remember to cool the dough very well before using it.

Step 16

Bake the cookies at 180ºC (356 F). Baking time depends on the size of the cookies. It usually ranges between 10 and 15 min. It depends on how dark and crisp you like them. When you take them out of the oven, flatten them with a smoother. You must do it as soon as you remove them, before they harden completely.

Step 17

Transfer the cookies to a cooling rack and wait until they are completely cool before decorating.

Step 18

Make the royal icing. Follow the instructions on the package (we must make a rather firm royal icing so that it does not flow when piped). It is not necessary to add flavors as it is delicious as is.

Step 19

Beat with the paddle at low speed so that it does not air too much and check that it is well uniform, white and shiny.

Step 20

Place the nozzle in the piping bag and fill with the royal icing. Start decorating the cookies. Make a large snowflake to place on top. Let yourself go with imagination! Make the shapes and decorations that you like the most on the cookie.

Step 21

You can make lines, dots … but for that shape to be maintained remember that it is important to have a good piping consistency with your royal icing. We dont want it too runny so it runs.

Step 22

Make other sizes of snowflakes, some smaller to fit in the spaces between houses

Step 23

Decorate the houses. Outline the area of the roof to later fill and simulate snow.

Step 24

Fill in the roof and make windows and a door

Step 25

Put some royal icing on the windows, it will give more winter and Christmas feeling.

Step 26

Do the same with the other houses. Make up different decorations!

Step 27

You can also add royal icing to the base of the cookie, it will look like the ground is snowy when you place them on the cake.

Step 28

Let the royal icing dry well before placing the cookies on the cake.

Step 29

As the large snowflake will be placed on top of the cake, we must fix a wooden skewer to the back of the cookie. We will stick it with icing. We put a little on the back of the cookie.

Step 30

Then we will place the top of the skewer onto the cookie and finish covering it with more royal icing. Let it dry very well before using it so that it does not come off.

Step 31

To stick the cookies to the cake, we will put a little royal icing on the back of each one. It will be enough to keep it glued but remember that you must let it dry so that it does not fall off.

Step 32

Place the first cookie and press lightly to set it.

Step 33

Continue placing the other houses, as well as the snowflakes. Keep the flakes pressed for a few seconds since they are not supported on the base of each tier, they could slip.

Step 34

To give a volume effect, place some lower houses in front of the tall ones.

Step 35

Let dry so that they do not fall when moving the whole set.

Step 36

Insert the large snowflake and place the houses on the top. You can put skewers on the back of the houses in the same way you did with the large snowflake. This will make it easier for you to keep them standing.

Step 37

Put some royal icing on a sieve

Step 38

Do your Christmas magic! Sprinkle on the cake and contemplate the beautiful effect you get!

Step 39

Your cake is ready to be served. Enjoy and Merry Christmas!

CHRISTMAS TREE TUTORIAL

CHRISTMAS TREE TUTORIAL

Skill level: BEGINNERS

You will need:

  • Threaded bar 8mm diameter x 12cm long. You will need two.

  • Hex nut 8mm x 8 

  • Drums 6” x 2

  • Drum 8” 

  • Drill with 8mm bit

  • Wrench 8mm

  • Saracino Pasta Top

  • Saracino modelling paste red

  • Saracino modelling paste white

  • Saracino gel colour green, white and brown

  • Strip cutter

  • Round cutter 6 cm

  • Calyx cutter

  • Rolling pin

  • Palet knife

  • Ribbon green

  • Winter wreath mould Karen Davies

  • Ball tool

  • Cake/Ganache or dummy

  • Paper towel

  • Foam pad

  • Cut off hard brush

  • Cone bud

  • Bendable wire

  • Bamboo / wooden skewer 

  • Sprinkles metallic (silver rods)

  • Sprinkles red and white balls

  • Edible glue

  • Brush

Step 1

On one of the small drums mark the position where you want fix the two legs. Put the three drums on top of each other and drill two 8mm holes through the three drums at the same time (so the holes will be at the same position on all three boards). Lay one small drum aside. Put the two threaded rods through the 6” and 8” drums and put hex nuts at the bottom of each rod beneath the 8” drum. Fix two other hex nuts on top of the 6” drum to create a firm base. Use the spanner to tighten the hex nuts to form a firm base structure.

Step 2

Cover the top of the 6” drum with fondant Pasta Top. Use a cut off stiff brush to give the fondant texture.

Step 3

Cover the two threaded bar legs with modelling paste. Do not cover the top of the threaded bar (as we need to fix the third drum). Thread a hex nut on the top of each bar.

Step 4

Roll red modelling paste and use the strip cutter to create strips

Step 5

Cut the strips into long pieces

Step 6

Glue the strips to the legs to form the stripes on the leggings.

Step 7

For the shoes colour some white modelling paste with the green gel colour, as dark as you want to

Step 8

Create two big tear drop shapes for the shoes.

Step 9

Use a ball tool to form a hole for the legs

Step 10

Cut the end of the shoe (to put around the legs)

Step 11

Glue both shoes around the two legs, and bend the pointy end so you create an elf shoe, glue the cut ends at the back together.

Step 12

Put the second 6”drum on top of the two legs and thread the hex nuts on top. Use the spanner to tighten them.

Step 13

Put your cake on top of the drum in a cone shape (13 cm base) and cover it with ganache. I used a dummie instead. If you’re using cake make sure you cover the drum and hex nuts with fondant before placing your cake on the drum.

Step 14

Colour some white Pasta Top fondant with the green gel colour. Use the KD mould to create pine needles. Before putting the paste into the mould apply some Trex to the piece of fondant. Flatten it into the mould with a rolling pin. Trim off the access fondant.

Step 15

Take the fondant out of the mould and glue it on your cake with Trex or a little water. you may want to start at the rear of the cake to practice the look you would like to achieve.

Step 16

Repeat until your cake/dummy is fully covered. Fix a green ribbon around the drum.

Step 17

Roll out red modelling paste to create a bow. Cut out two rectangles of 14cm x 7cm and one rectangle of 10cm x 4cm.

Step 18

Apply a little glue to the ends of the two rectangles and fold the other end over. Place some rolled up paper towel in the bow so that the bow dries forming a round shape. Pinch the ends of the glued side together.

Step 19

Fold the long sides of the small rectangle to the inside and glue the end to the two bows.

Step 20

Glue the rectangle all around and leave it to dry.

Step 21

Roll out some white Pasta Top fondant and cut out circles

Step 22

Use a ball tool to flatten the edges of the fondant on the foam pad. Make sure your tool is half on the foam pad and half on the fondant. That will create a ruffle effect.

Step 23

Fold the circle in half.

Step 24

Fold into three.

Step 25

Remove the access fondant from the base of each ruffle.

Step 26

Fix the bow to the front of the cake. Fix the ruffles around the base of your cake

Step 27

Use a small ball tool to push the ruffles on to the cake. Create three layers of ruffles around the bottom of the cake.

Step 28

Make balls of red modelling paste to glue in your ruffles. As many as you want to.

Step 29

Roll out red modelling paste to a long sausage shape and cover the bottom drum. Use the cut off stiff brush to create texture on the paste. Cut aeay the access fondant. Fix the green ribbon on the side of the drums

Step 30

You will now need the long bamboo skewer and the bendable wire.

Step 31

Twist the wire around the top of the skewer. Form the wire to a circular shape using the 1kg Saracino tub as a modelling tool. Insert the skewer in the cake, leaving the wire out of the top of the cake.

 

Step 32

Insert a skewer into the bottom of the flower bud.

Step 33

Cut out three circles of Pasta Top fondant and use the ball tool to ruffle the edges.

 

Step 34

Fix the three ruffled circles one by one around the flower bud. Roll out red modelling paste and cut out a large calyx.

Step 35

Use a ball tool to ruffle the edges of the calyx and glue the calyx on to the flowerbud

 

Step 36

Using green fondant in the small needle mould cover the top of the skewer and the wire at the top of the tree.

Step 37

We need about 4 moulded small needles. Put some edible glue at the back of the fondant and glue the fondant onto the wired part of the skewer.

 

Step 38

Glue the flowerbud on the end of the wire. This can be any decoration of your choice. Cover the end of the bud with a small amount of green paste.

Step 39

Use some sprinkles to decorate the Christmas tree cake

 

Step 40

Use the metallic sprinkles to create a garland look on the cake.

Step 41

Make some red bows using modelling paste or use a bow mould. Use the bows to decorate the cake. Glue some red and white sprinkles on the cake.

 

Step 42

Colour some modelling paste with the brown gel colour for the pine cones. Use the mould to create the pinecones. Make different sizes of pine cones.

Step 43

Glue the pine cones on to the cake above the red bow and paint the tips with white to give a frosty look

 

Step 44

Fix pine cones at the base of the bow (or you can glue ruffles). You decorate it the way you would like it to look.

Step 45

Fix pine cones and needles on the drum if you wish.

 

Step 46

Your Christmas cake is ready to party!

GINGERBREAD CHRISTMAS BAG

GINGERBREAD CHRISTMAS BAG

Skill level: BEGINNERS

You will need:

  • Saracino Raspberry Supreme Concentrated Food Flavouring

  • Saracino Pistacchio Supreme Concentrated Food Flavouring

  • Saracino Vanilla Bourbon Supreme Food Flavouring

  • Saracino Chocolate Drops WHITE

  • Saracino Cake Gel Glue

  • Saracino CMC Powder

  • Saracino Pasta Top White

  • Saracino Concentrated Gel Colour Green, Red, Brown, Yellow and Black

  • Saracino Push Pump Glitter Dust Red

  • Saracino Powder Food Colouring Brown, Pink and Yellow

  • Modelling tools

  • Set of round cutters

  • Cocktail sticks or uncooked spaghetti

  • Soft brushes

  • Fondant knife

  • Smoother

  • Steel spatula

  • Ruler

  • Raspberry cake – Pistachio cake and vanilla cake (your favourite cake recipe)

  • Buttercream 

  • Template for the face, nose, eyes and cheeks. To download simply click on the picture 

Step 1

Create a ganache by melting your white chocolate drops

 

Step 2

Make buttercream and flavour with Pistachio flavouring and add pieces of chopped up Pistachio

Step 3

Make raspberry jelly and flavour with Raspberry food flavouring. We mix with unflavoured gelatine to set. Allow to set in a cake tin the same size as your sponges.

Step 4

Bake 3 cakes. Raspberry, pistacchio and vanilla using Saracino colorings and flavorings

Step 5

You will need to cut the three sponges with a flat back and front. We will use a template. See the next picture.

Step 6

You can use a piece of cardboard or a cut cake board as a template. You will need a template approximately 11 x 24cm. Cut each sponge to size.

Step 7

Put pistachio cream in a piping bag and remove the set raspberry jelly from the cake tin

Step 8

Pipe the Pistachio cream onto the top of the bottom sponge. Then add the jelly. Trim to the size of the sponge below.

Step 9

The jelly is only in the bottom layer. Fill the other layer with buttercream. Your three sponges should be layered as shown.

Step 10

To stop the layered sponges from moving when carving, insert two wooden skewers through to the base. Place the bag template against the front of the cake and carve the sides of the bag. You can download the bag shape template HERE

Step 11

Trim and remove any excess sponge to achieve the right design

Step 12

Ganache the cake using the Saracino melted white chocolate drops

Step 13

Colour the fondant brown, black, red, pink and green. You will need enough brown to cover the cake, red for the nose and green for a bow, pink for cheeks and black and white for the eyes. 

Step 14

To achieve a chestnut brown colour mix a little yellow colouring into the brown.

Step 15

To make a handle mix a little bit of brown fondant with CMC

Step 16

Roll out the fondant to make the handle

Step 17

Cut a strip 2.5 x 25cm long

Step 18

Allow to dry on a curved surface

Step 19

Make an oval shaped nose using red fondant 

Step 20

Spray the nose with red Push pump glitter and let it dry

Step 21

Divide 50 grams of green fondant and make two tear drop shapes for the bow.

Step 22

Cut ends

Step 23

Make each tear drop into a heart shape by cutting out a groove at the wide end of each one. Smooth the edges. Connect the pieces using a little glue or water

Step 24

Using green paste roll a small sausage shape. Cover the joint. 

Step 25

Attach it to the bow. Paint the bow with green edible glitter

Step 26

To cover the top and sides of the cake cut out a long rectangle of the brown paste (width must be the same as your cake or slightly larger)

Step 27

Cover the top of the cake and trim the excess

Step 28

Roll out more brown paste. 

Step 29

Using your template cut out the front of the bag. You will need two of these shapes to cover the back and the front

Step 30

Attach to the front and the back of the cake. They should be slightly larger than the cake itself

Step 31

For eyes roll out two equal balls

Step 32

Roll them flat.

Step 33

Roll out two balls of black modelling paste (smaller than white) and fix to the white paste

Step 34

Using round cutter cut off the ends of both eyes

Step 35

Add some white dots and lines to give it nice effect and a bit of expression 

Step 36

So they look like this or similar.

Step 37

Fix the red nose to the middle of the cake and attach both eyes. Using a little glue.

Step 38

Using white fondant roll out a long sausage

Step 39

This is to create a snow effect. You may wish to practise the design on your template before fixing to the cake.

Step 40

Attach to the cake using a small amount of cake gel

Step 41

For lips roll out a long and thin sausage using black fondant 

Step 42

Fix to the cake to give the bag a nice smile 

Step 43

For cheeks, roll out two balls using pink fondant. Form them into a teardrop shape

Step 44

Form into a heart shape.

Step 45

Using cake Gel fix to the cake at both ends of the mouth as shown on the next picture

Step 46

For the handle roll two balls out of brown fondant and roll to small sausages

Step 47

Measure the width of the handle you prepared earlier and attach two sausages to the top of the cake keeping the same width as the handle.

Step 48

Fix the handle to the cake

Step 49

Attach the bow.

Step 50

Prepare pink dust. Mix brown and yellow dust.

Step 51

Add a small amount of orange powder to the brown and yellow.

Step 52

Your powder colour is ready to dust the cake using a soft brush. Always make sure you remove excess powder from your brush on a piece of kitchen paper prior to dusting the cake. 

Step 53

Dust the edges of the cake

Step 54

Using pink powder, dust the cheeks 

Step 55

Using white fondant add two little dots on both sides. Your cute gingerbread bag is ready to be served!

Step 56

You can go wild with your imagination and create all sort of Christmas bags!

Step 57

Merry Christmas!