HAND PAINTED WEDDING CAKE TUTORIAL

HAND PAINTED WEDDING CAKE TUTORIAL

Author: ANGELA PENTA

Skill level: ADVANCED

You will need:

INGREDIENTS: 

  • Pasta Top Black

  • Pasta Model White, Red, Light blue and Yellow

  • Powder colours Skin tone, Black, Yellow, Red, Sky blue, Blue and White

  • CMC

  • Cake gel glue

  • Shiny Effect Confectioners Glaze

EQUIPMENT: 

  • 4×4″ round cake or dummy

  • 6×8″ round cake or dummy

  • 9″ round cake board

  • Black ribbon

  • Large and small rolling pins

  • Fondant Smoother

  • Flexible fondant smoothers

  • Ruler

  • Knife

  • Craft knife

  • Palette knife

  • Stars and heart plunger cutters 

  • Small ball tool

  • Brushes

  • Paintbrushes

  • Cocktail sticks

  • Small plastic dishes

  • Clear alcohol

  • Corn starch

Step 1

For this project we need 2 dummies (or cakes) 4×4″ round, 6×8″ round and a 9″ round cake board that will be covered with black Pasta Top.

TIP 1: Pasta Top is Vegan, Gluten free and has NO hydrogenated fats. It’s very stretchy and can be rolled very thin.

Step 2

Roll out the paste large enough to cover each tier.

Step 3

Roll the black Pasta Top thinly. You can use a little corn starch on your work surface so it doesn’t stick (but not too much to stain the black paste)

Step 4

Brush the dummy with water and put the paste on top of the dummy as shown

Step 5

Using a smoother press on top to make it smooth and with the hands smooth the paste down the sides of the cake

Step 6

Use the same process to cover the other tier and create sharp edges using flexible fondant smoothers

Step 7

Brush the cake board  with water, roll out the black Pasta Top and cover the cake board

Step 8

Smooth the surface with a smoother to remove any air bubbles

Step 9

Trim the excess paste from around the board using a craft knife

Step 10

Add the black ribbon around the cake board

Step 11

Assemble the cake as shown in the picture

Step 12

Use a ruler to measure the size of the pop art inspired illustrations and print them, these images will be used as a template

Step 13

Let’s start with the painting, we need the printed illustration, Pasta Model white, CMC and powder colours skin tone, black, yellow, red, sky blue, blue and white

Step 14

Add a little bit of CMC to the paste to help it become firmer.

Step 15

Roll out Pasta Model to about 3 mm thick, it must be larger than the printed image

Step 16

Place the printed image over the paste and using a small ball tool, trace outlines on the paste

Step 17

Use craft knife to cut out the shape

Step 18

Begin by painting light colours, mix skin tone and white powder colours with alcohol and paint faces and hands

Step 19

Continue painting with light colours, for yellow mix yellow and white powder colours and dilute with alcohol

Step 20

Mix sky blue and white powder colours with alcohol and paint the bright reflections of the hair, you don’t need to be precise because we will define the design later with black

Step 21

Complete by painting the red and blue areas using the red and blue powder colors diluted with alcohol

Step 22

Mix black powder colour with alcohol and paint using a fine brush

Step 23

Using the picture as reference paint the design on the paste using the black powder colour mixed with alcohol

Step 24

Once the painting is complete, paint the sides with black powder colour diluted with alcohol

Step 25

When the painting is dry we can glue the piece on the cake using Cake gel glue

Step 26

Glue the piece on the bottom tier being careful not to touch it too much with your hands as this may damage or smudge the painting

Step 27

Roll out red Pasta Model and cut out a heart using the heart plunger cutter. Set aside.

Step 28

Mix red Pasta Model with a little bit of CMC

Step 29

Roll out red Pasta Model to about 3 mm thick

Step 30

Place the printed image on the paste and, using a small ball tool, trace the outlines of the red heart on the paste

Step 31

Do the same using the white and yellow paste

Step 32

Roll out light blue Pasta Model to about 2 or 3 mm thick and using a small ball tool, trace the outlines of the word LOVE

Step 33

Once all the shapes are traced use a craft knife to cut them out, these are all the pieces needed to make the comic heart

Step 34

Using a thin brush paint a black line on the outline and sides of the heart shape

Step 35

Do the same for all shapes

Step 36

Glue all the pieces of the comic using Cake gel glue

Step 37

Glue the word LOVE using the printed image as a reference

Step 38

Add a layer of Cake gel glue to the back of the big red heart

Step 39

Stick the comic onto the top tier, support with toothpicks if necessary until dry and then they can be removed.

Step 40

Roll out the white Pasta Model and cut out some stars with 2 sizes of stars plunger cutters 

Step 41

Using the black powder colour diluted with alcohol paint the sides of the stars

Step 42

Make about 35 stars of different sizes

Step 43

Using a brush add a little bit of Cake gel glue to the back of each star

Step 44

Glue the stars to the cake and cake board randomly

Step 45

Add a shine to the word LOVE with the Shiny Effect Confectioners Glaze

Step 46

Your cake is ready <3 

VALENTINE CUTE GOBLIN MODELLING TUTORIAL

VALENTINE CUTE GOBLIN MODELLING TUTORIAL

Author: Goda Laivyte

Inspired by Patricia Hedegaard

Skill level: BEGINNERS 

You will need:

INGREDIENTS:

  • Purple Saracino modelling paste mixed with white paste to make a pastel colour
  • Red Saracino modelling paste
  • White and pink powder colour
  • Black Saracino modelling paste

EQUIPMENT: 

  • Cake and board covered with white Saracino Pasta Top sugar paste
  • Rolling pin
  • Modelling tools including Dresden tool
  • Heart cookie cutters
  • Brushes for edible dust colours

Step 1

Roll a 35g ball of the pastel purple Saracino modelling paste for the body of the goblin.

Step 2

Roll the ball into a longer shape like shown in the picture (around 5cm long).

Step 3

Press it down with the palm of your hand to flatten it so you can easily attach it to the surface of the cake.

Step 4

Hold the shape with one hand and press from both sides at the bottom of the shape making space for attaching legs. Put aside to dry.

Step 5

For the legs we will need 2 x 18g balls of the same colour Saracino modelling paste.

Step 6

Roll one ball into a longer sausage shape.

Step 7

Roll one end of sausage shape to make it thinner.

Step 8

Bend the thicker part for the foot.

Step 9

Shape it with your fingers like in the picture for a natural look for the foot.

Step 10

Make a deep indent under the foot with your Dresden tool.

Step 11

Using your fingers roll the tip of the foot to make it sharp and bend it a bit.

Step 12

Attach the body and legs with water or edible glue to the cake.

Step 13

For the arms you will need 2 x18g balls of purple modelling paste.

Step 14

Roll two sausage shapes the same length.

Step 15

Roll one end of the sausage thinner leaving thicker part for palm of the hand

Step 16

Flatten the thicker part so you can cut and shape fingers.

Step 17

For the thumb cut a piece as shown in the picture.

Step 18

Cut to make 3 fingers. Shape fingers and palm of the hand using Dresden tool and your fingers. Repeat the same steps for the other hand.

 

Step 19

For the heart roll a ball of 20g red Saracino modelling paste.

Step 20

Roll the ball with a small rolling pin to approximately 0.4cm thick.

Step 21

Cut a petal shape, you can use a heart cutter if you have the right size, for this I needed a special size so I used a petal cutter instead.

Step 22

Cut a little triangle on top of the shape.

Step 23

Blend the edges and shape it to look like a heart.

Step 24

Attach the arms to the body holding the heart. Use a sharp tool to form a belly button.

Step 25

For attaching the head to the cake cut a short piece of wooden skewer and insert it into the cake where the head will be attached.

Step 26

For the head roll a ball of 70g Saracino purple modelling paste.

 

Step 27

Shape the head to 5cm height with 6.5cm width at the bottom and 3cm width at the top. For the mouth and chin press an indent with your finger approximately 2cm wide.

Step 28

Roll a 1cm size ball for the nose, shape and attach to the face.

Step 29

Start shaping the lips and nose using your Dresden tool.

Step 30

Using the back of your finger press across the face where the eyes will be to form the forehead shape.

Step 31

With your Dresden tool make incisions where the eyes start and finish.

Each eye is approximately 2cm wide with a 1.5cm gap between them. We want each eye 1cm tall at it’s tallest part.

Step 32

Once you have shaped the eyes cut out the residue from inside of them. Smooth the surface inside the eyes with your Dresden tool.

Step 33

For the eyes you will need to roll two balls of the same size using the black Saracino paste. 

Step 34

Roll the balls into teardrop shapes. Using your Dresden tool shape them into the eye sockets. Form the wrinkles around the eyes with your Dresden tool. Shape the lower eye lids.

Step 35

To give expression use your finger to press down the top of the eye as shown in the picture. We want to achieve a sad expression.

Step 36

For the ears you will need 2 x 15g balls of purple Saracino modelling paste.

Step 37

Roll the balls with a rolling pin to make two flat oval shapes.

Step 38

Using your Dresden tool model the ears and attach them to the head. Dust the face using pink edible dust colour and a soft brush as you can see in picture. Use your Dresden tool to give the face more feature and character. 

Step 39

Mix a small amount of the white powder colour with water. Using a very fine brush paint highlights to the eyes.

Step 40

Dust the body with the same pink edible dust as we used in step 38.

Step 41

Attach the head to the body and the cake.

Step 42

Roll and cut out two different sizes of hearts as desired for the cake and dust them with the edible dust colour. Set aside to dry. Now roll two small pieces for the tiny horns that will go on his head.

Step 43

Attach the hearts on the cake as shown. Attach the horns with a little glue or water on to the top of his head.

Step 44

Stick the double sided tape around the edge of the board.

Step 45

Stick pastel purple colour satin ribbon around the cake board. All done!

Happy Valentines day!

SUEDE EFFECT VALENTINE CAKE TUTORIAL

SUEDE EFFECT VALENTINE CAKE TUTORIAL

You will need:

Chocolate cake 

  • 130g plain flour
  • 150g caster sugar
  • 65 g cocoa powder
  • 1/2 tsp of baking powder
  • 1/2 tsp of soda powder
  • pinch of salt
  • 100g buttermilk
  • 50ml vegetable oil
  • 1tsp Saracino Vanilla food flavouring
  • 1 large egg
  • 2 tsp of instant coffee diluted in 250ml boiled water

Jelly

  • 250g cherry puree
  • 6g gelatine
  • 20g cold water 

Crunchy base

  • 100g milk chocolate with nuts 
  • 60g Feuilletine
  • 30g Saracino hazelnut and chocolate food flavouring
  • 30g Saracino peanut food flavouring 

Tiramisu mousse with coffee

  • 8g gelatine 
  • 20g water
  • 3g instant coffee
  • 50g icing sugar
  • 60g Saracino tiramisu food flavouring 
  • 500ml double cream 

Suede effect 

  • 150g Saracino cocoa butter melted with 150g Saracino white chocolate drops
  • 0.5g Saracino red powder colour 

Equipment

  • food safe paint spray
  • bowls
  • whisk
  • 7′ cake tins
  • spoons
  • baking paper
  • confectionery mould with a diameter of 12-13 cm
  • heart silicone mould
  • blender 

Step 1

For the chocolate cake. Sift the dry ingredients into one bowl (flour, sugar, cocoa, powder with soda and salt). In the second bowl, add the wet ingredients (oil, egg, buttermilk)

Step 2

Add the dry ingredients to the wet ingredients and mix briefly. Get your hot coffee and a whisk ready.

Step 3

With a slow stream, pour the coffee and mix it together.

Step 4

Pour the mixture into two low 7-inch cake tins, lined with paper for baking.

Step 5

Place in an oven preheated to 160 ° (fan oven). Bake for 25 minutes.

Step 6

After baking, cool the cakes on a wire rack.

Step 7

Now for the jelly get all your ingredients ready.

Step 8

Heat the fruit purée to about 50°C, mix the gelatine with water. Prepare a 7 inch shallow dish and cover it with cling film. Heat the gelatine mix in the microwave and add it to the puree. Combine the ingredients.

Step 9

Pour into the dish and put it in the freezer for a minimum of 6 hours.

Step 10

Prepare your ingredients for the crunchy base.

Step 11

Melt the chocolate over a water bath or in a microwave oven. Add both flavour pastes and the Feuilletine. Mix to combine the ingredients.

Step 12

We prepare a circular confectionery mould with a diameter of 12-13 cm, baking paper and a baking tray.

Step 13

Line the bottom with baking paper, then transfer the mixture. Put in the freezer for a minimum of 8 hours.

Step 14

 Get all your ingredients ready for the mousse.

Step 15

Mix gelatine with water and set aside. Measure 100ml of cream and heat it with chocolate and coffee. Stir until dissolved and combined.

Step 16

Heat the gelatine in a microwave and add to the finished chocolate and coffee mixture and combine.

Step 17

In a mixing bowl, beat the remaining cream with icing sugar and Tiramisu flavouring paste to a semi-stiff consistency.

Step 18

Then, in a slow stream, add the previously prepared chocolate-coffee mixture and gently combine with the cream.

 

Step 19

Now for stacking the cake. Pour the mousse mixture into a jug. Prepare a heart shaped silicone form, your frozen jelly, crisp base, cake and baking paper.

Step 20

Cut out a heart shape from the paper that matches the size of our mould. Place the template and cut out the heart shape in our cake and jelly.

Step 21

To assemble the cake. Place the silicone mould on a rigid base or board. Now prepare the cut jelly, cake and crispy base. Pour a little mousse into the bottom of the mould.

Step 22

First we place the frozen jelly.

Step 23

Cover the jelly with a little mousse and place the crispy base over.

Step 24

Add more mousse and place the cakes. Gently press them down and remove any excess mousse.

Step 25

Cover the finished cake with cling film and put it in the freezer for a minimum of 12 hours.

Step 26

To make a suede effect we measure out all the necessary ingredients.

 

Step 27

Melt the cocoa butter, put the chocolate in a tall dish

Step 28

Pour hot cocoa butter over the chocolate.

Step 29

Blend until combined.

Step 30

Add the red powder colour and combine with a blender.

Step 31

We are preparing our Spray Gun. Hire one from Andy. He has everything.

Step 32

Check the temperature of the mixture (it needs to be between 40-50°C).

Step 33

Take the frozen cake out of the mould.

Step 34

Pour the mixture into the tank of the spray gun.

Step 35

Spray from a distance of about 10-15 cm.

Step 36

Your cake is ready, you can also add edible gold if you want to give a different effect.

VALENTINE MODELLING TUTORIAL

VALENTINE MODELLING TUTORIAL

Skill level: BEGINNERS

TIPS:

Tip 1: If you are not confident enough to write directly on the cake using edible pens then use a needle tool to write on the cake and then write with the pen over it, this will avoid any spelling mistakes and save time re-doing things  

Tip 2: Use tooth picks or cocktail sticks to secure the figurines on the cake along with some glue, this keeps the figurines safe while travelling with the cakes.

You will need:

INGREDIENTS: 

  • Saracino pasta model pink
  • Saracino pasta model blue
  • Saracino pasta model red
  • Saracino pasta model skin
  • Saracino modelling chocolate brown
  • Saracino modelling paste white
  • Saracino modelling paste black
  • Edible glue
  • Pink dust powder colour
  • Gel colours: white, brown, black, pink
  • Black edible pen
  • Cornflour

EQUIPMENT: 

  • 10” Round cake or dummy
  • Polystyrene cone
  • Envelope template
  • Rolling pin
  • Craft knife
  • Ball tool
  • Dresden tool
  • Shell tool
  • Soft modelling tools
  • Brushes
  • Mat
  • Heart cutter

Step 1

To make an envelope knead some white Saracino Modelling Paste until workable.

Step 2

Using rolling pin roll it thinly.

Step 3

Cut out the envelope template. You can download it HERE. Place on the rolled icing ready for cutting.

Step 4

Fold both sides

Step 5

Cut the bottom piece and keep aside

Step 6

Use any cylindrical shape and mould the envelope around 

Step 7

Glue the left over piece in such a way that the base is left hollow 

Step 8

Remove the cylinder once the envelope is dry 

Step 9

For the head knead Saracino skin tone modelling paste. Roll it into an egg shape.

Step 10

Using the ball tool make indents on either side.

Step 11

With the dresden tool shape the nose 

Step 12

Mark the nostrils 

Step 13

Using your dresden tool gently shape the lower lip and then the upper lip 

Step 14

With a dresden tool or sharp knife open up the mouth to give that depth

Step 15

Shape the forehead and eyebrow to create expressions 

Step 16

Finally finish the lips and make two dimples on either sides 

Step 17

Add small amount of white modelling paste for the teeth 

Step 18

Add small white balls of white paste for the eyes and blend well, mark the eye lids with the sharp end of your Dresden tool.

Step 19

Using brown modelling chocolate make tiny eyebrows by rolling thinly and use a small ball tool or needle tool to place them, apply a small amount of edible glue if required

Step 20

Blush the cheeks, forehead and nose with pink powder colour. Be careful to dust lightly.

Step 21

Make thin eyelashes and eyelids using edible black pen 

Step 22

Paint the iris of the eyes with light brown and white edible gel colours

Step 23

Paint the pupil of the eyes in black

Step 24

Finish the male and female heads and add a bit of gloss on lips if required using red for the female. 

Step 25

Using skin tone modelling paste model the body for both the male and female

Step 26

Roll some light blue modelling paste into a thin sheet

Step 27

Wrap around the male body to form the shirt and fold edges to make collar 

Step 28

Add small balls of white paste for buttons and press with a sharp modelling tool.

Step 29

Cut two rectangular pieces for the sleeves out of the same blue sheet 

Step 30

Using skin tone paste form a hand by making a ball, press down and cut out the thumb. Then shape to give a natural look. Roll the blue modelling paste to create arms and attach the hand. Add folded thin cuffs to finish off the sleeves. 

Step 31

Attach the arms over the shoulders and blend the joint. You can use dry pasta inserted into the arm to secure in place.

Step 32

Attach the head to the neck, use a toothpick to keep it in place 

Step 33

Add a small thick circular piece of black modelling paste over the head to make the hair 

Step 34

Use a shell tool to make the texture of the hair 

Step 35

Keep the figurine upright and let it set

Step 36

Form the female chest and fix to the body. Glue the female body to the polystyrene cone and cover the cone with white modelling paste to make the skirt 

Step 37

Now roll a thin sheet of white modelling paste and form some frills and pleats 

Step 38

Glue the pleated skirt around the waistline and add shape and form with a modelling tool.

Step 39

Now pleat a pink sheet of modelling paste and cover the white skirt

Step 40

Blend the skirt well with the upper body 

Step 41

Cut a rectangular piece in pink with sweetheart neckline to make the bodice and glue it to the upper body, blend well at the back

Step 42

Make the hands and form the fingers.

Step 43

Glue the arms on the body and blend it over the shoulders 

Step 44

Take some brown modelling chocolate and roll an elongated piece, then cut thin triangular strips and twist for the hair.

Step 45

Secure it over the head with some glue 

Step 46

Using the same chocolate paste add fringes.

Step 47

Texture the hair with the Dresden tool. Roll a thin white strip and add a bow around the waist.

Step 48

Add some edible red gel colour to white modelling paste to make red or use pre-coloured modelling paste 

Step 49

Roll a thin sheet of the red paste and cut heart shapes using heart cutter 

Step 50

Glue the hearts on the hands of the man

Step 51

Glue one heart on the envelope 

Step 52

Place one heart over a brown square made with modelling paste to make the stamp 

Step 53

Using black edible pen paint the print over the stamp and crimp the edges.

Step 54

Write any imaginary address to give a personal touch 

Step 55

Cover a 10” round cake with Saracino Pasta Top and decorate with some hearts 

Step 56

Now place the male figurine in the envelope and glue it over the cake, place the female figurine beside him and your “Valentine Cake” is now ready to be served with love 

VALENTINE’S CAKE POPS TUTORIAL

VALENTINE’S CAKE POPS TUTORIAL

Skill level: INTERMEDIATE

Chocolate tempering:

White Chocolate:

Heating to 40-45 degrees, cooling to 24-25 degrees, final temperature 27-28 degrees.

Milk chocolate:

Heating to: 40-45 degrees, cooling to 27-28 degrees, final temperature 30-31 degrees.

Dark chocolate:

Heating to: 45-50 degrees, cooling to 28-29 degrees, final temperature 31-32 degrees.

You will need:

INGREDIENTS:

  • Saracino Chocolate drops white 250g
  • Saracino Food Flavouring Pistachio
  • Saracino Pasta Model Pink
  • Saracino Pasta Model White
  • Saracino Dust powder Pink
  • Saracino Gel color Pink
  • Saracino Gel color Black
  • Saracino Cakegel
  • Plain cupcake mix, butter and eggs
  • Sprinkles

EQUIPMENT:

  • Silicone popsicle mini ice cream mould (Silikomart)
  • Popsicle sticks
  • Food thermometer
  • Pan with a thick base
  • Heatproof glass bowl
  • Marble or natural stone slab for chocolate tempering 
  • Spoon
  • Pallet knife
  • Brush
  • Pastry bag
  • Rolling pin
  • Dresden tool
  • Knife
  • Ball tool
  • Round cutter diameter 45mm
  • Leaf cutter 20 x 25mm
    •  

Step 1

Using the Bain Marie technique melt the Saracino chocolate drops. Make sure everything is melted and has a temperature between 40 and 45 degrees. Check the temperature of the chocolate with a food thermometer. Pay attention! The temperature rises quickly. The bottom of the bowl should not touch the hot water. Make sure that no water gets into the chocolate.

Step 2

Now temper the melted chocolate. In this case, you are going to reduce the temperature of the melted white chocolate to 24 to 25 degrees. Do this by working with a pallet knife on a marble or natural stone surface. Use a food thermometer to check the temperature. When you have reached the temperature of 24 to 25 degrees, you heat the chocolate again to 27 to 28 degrees back in the bowl over the water. Pay attention! Tablating or tempering is a cooking technique in which melted chocolate is cooled back, so that crystals are formed in a certain way, which gives the chocolate a structure. This structure is obtained by heating the chocolate above 30°C, causing three of the four crystals to melt. Work meticulously with the temperatures for the best end result. This tutorial includes an overview of the temperatures for tempering white, milk and dark chocolate.

Step 3

Take your silicone ice pop mould and pour a heaped tablespoon of melted chocolate into it. Turn the mould around in a controlled manner so that the chocolate runs along the edges of the mould.

Step 4

Make sure all sides of the mould are covered with chocolate to the edges.

Step 5

Repeat steps 3 and 4 for each section of the mould. For a nicer end result it is better to fill each part separately with chocolate. If you want the chocolate base to be a bit thicker, repeat steps 3 and 4 again for all 4 ice pop shapes.

Step 6

Remove excess chocolate with a pallet knife. Make sure the top edge is nice and smooth.

Step 7

Let the chocolate set in the mould at room temperature.

Step 8

Bake pistachio cupcakes. Make cupcake batter according to the recipe. Add the Saracino pistachio flavouring in proportion to the batter. Bake the cupcakes. Let them cool and crumble 3 cupcakes into a bowl. For 4 cake pop ice creams, take 3 cupcakes made of 35g batter each.

Finely chop pistachio nuts as desired and mix with the crumbs.

Tip: You can play with the flavours. Saracino have 15 to choose from!

Step 9

To achieve a nice workable filling, add 1 tablespoon of Italian Meringue Buttercream or white ganache to the pistachio crumbs. Knead everything well together and divide into 4 equal portions.

Step 10

Using a spoon, gently press the cake mixture into the mould.

Step 11

Carefully slide the sticks into the cake pop through the hole in the mould.

Step 12

Make sure the cake is not above the top surface of the mould and that the top of the cake pop is as smooth as possible.

Step 13

Temper a small amount of white chocolate and cover the top. Smooth with a palette knife and remove any excess chocolate.

Step 14

Let the chocolate set at room temperature.

Step 15

When everything is set, remove the cake pop ice creams from the silicone mould.

TIP: You can put the mould in the freezer for 5 minutes before removing the cake pops.

Step 16

Take a 20 x 25 mm leaf cutter and cut out the shape for the forehead. Use a sharp knife to form the side hair. Keep these cut-out parts. 

Step 17

Shorten the area for the nose by a few millimetres. Take 30g of white Pasta Model. Roll out to 2mm thick and cut out a circle with the cutter and stick the pink part on top with cake gel.

Step 18

Use the pink drop shapes previously cut out to make ears. Roll out a small amount of white Pasta Model thinly and cut out two drop shapes with the leaf cutter. Stick them on the pink part and round off the bottom. Also use the leaf cutter for this. Using your ball tool make two indents in the head where the eyes will be

Step 19

Colour a small amount of white Pasta Model with the black gel colour. Roll two oval balls of 3mm in size for the eyes and one oval ball of 5mm for the nose. Place on the face. Use cake gel to fix.

TIP: You can also use the pre-coloured Pasta Model Black.

Step 20

Dust the tips of the ears and the top of the head with the pink dust powder.

Step 21

For the tail take 10g of pink Pasta Model and roll into a sausage shape. Cut into 2 equal parts. Repeat this step with 10g of white Pasta Model. Stick a pink and white part together with cake gel to form a tail. Leave the white end part a little bit thicker. Use the Dresden tool to add texture to the tail.

Step 22

Dust the middle part of the cake pop ice cream with pink dust powder. Dust so darker in the middle getting lighter outwards.

Step 23

Attach the head and tail to the cake pop ice cream with cake gel. Do not use too much cake gel! You can also attach the parts with melted chocolate.

Step 24

For the heart you will need a small ball of pink Pasta Model. Flatten with your finger and form a notch on one side with a Dresden tool. With your fingers make a point on the other side. Dust the top with pink dust powder.

Step 25

To decorate your cake pop ice cream with chocolate, melt a small amount of white chocolate. While heating, add pink dust powder until you reach the desired colour. Temper the chocolate as shown previously.

Put the chocolate into a piping bag with a small piping nozzle. Pipe lines over the bottom part of the cake pops. Decorate immediately with sprinkles.

Step 26

Vary with different looks. Use your imagination!

Use colours you want to achieve the look you love.