VALENTINE MODELLING TUTORIAL

VALENTINE MODELLING TUTORIAL

Skill level: BEGINNERS

TIPS:

Tip 1: If you are not confident enough to write directly on the cake using edible pens then use a needle tool to write on the cake and then write with the pen over it, this will avoid any spelling mistakes and save time re-doing things  

Tip 2: Use tooth picks or cocktail sticks to secure the figurines on the cake along with some glue, this keeps the figurines safe while travelling with the cakes.

You will need:

INGREDIENTS: 

  • Saracino pasta model pink
  • Saracino pasta model blue
  • Saracino pasta model red
  • Saracino pasta model skin
  • Saracino modelling chocolate brown
  • Saracino modelling paste white
  • Saracino modelling paste black
  • Edible glue
  • Pink dust powder colour
  • Gel colours: white, brown, black, pink
  • Black edible pen
  • Cornflour

EQUIPMENT: 

  • 10” Round cake or dummy
  • Polystyrene cone
  • Envelope template
  • Rolling pin
  • Craft knife
  • Ball tool
  • Dresden tool
  • Shell tool
  • Soft modelling tools
  • Brushes
  • Mat
  • Heart cutter

Step 1

To make an envelope knead some white Saracino Modelling Paste until workable.

Step 2

Using rolling pin roll it thinly.

Step 3

Cut out the envelope template. You can download it HERE. Place on the rolled icing ready for cutting.

Step 4

Fold both sides

Step 5

Cut the bottom piece and keep aside

Step 6

Use any cylindrical shape and mould the envelope around 

Step 7

Glue the left over piece in such a way that the base is left hollow 

Step 8

Remove the cylinder once the envelope is dry 

Step 9

For the head knead Saracino skin tone modelling paste. Roll it into an egg shape.

Step 10

Using the ball tool make indents on either side.

Step 11

With the dresden tool shape the nose 

Step 12

Mark the nostrils 

Step 13

Using your dresden tool gently shape the lower lip and then the upper lip 

Step 14

With a dresden tool or sharp knife open up the mouth to give that depth

Step 15

Shape the forehead and eyebrow to create expressions 

Step 16

Finally finish the lips and make two dimples on either sides 

Step 17

Add small amount of white modelling paste for the teeth 

Step 18

Add small white balls of white paste for the eyes and blend well, mark the eye lids with the sharp end of your Dresden tool.

Step 19

Using brown modelling chocolate make tiny eyebrows by rolling thinly and use a small ball tool or needle tool to place them, apply a small amount of edible glue if required

Step 20

Blush the cheeks, forehead and nose with pink powder colour. Be careful to dust lightly.

Step 21

Make thin eyelashes and eyelids using edible black pen 

Step 22

Paint the iris of the eyes with light brown and white edible gel colours

Step 23

Paint the pupil of the eyes in black

Step 24

Finish the male and female heads and add a bit of gloss on lips if required using red for the female. 

Step 25

Using skin tone modelling paste model the body for both the male and female

Step 26

Roll some light blue modelling paste into a thin sheet

Step 27

Wrap around the male body to form the shirt and fold edges to make collar 

Step 28

Add small balls of white paste for buttons and press with a sharp modelling tool.

Step 29

Cut two rectangular pieces for the sleeves out of the same blue sheet 

Step 30

Using skin tone paste form a hand by making a ball, press down and cut out the thumb. Then shape to give a natural look. Roll the blue modelling paste to create arms and attach the hand. Add folded thin cuffs to finish off the sleeves. 

Step 31

Attach the arms over the shoulders and blend the joint. You can use dry pasta inserted into the arm to secure in place.

Step 32

Attach the head to the neck, use a toothpick to keep it in place 

Step 33

Add a small thick circular piece of black modelling paste over the head to make the hair 

Step 34

Use a shell tool to make the texture of the hair 

Step 35

Keep the figurine upright and let it set

Step 36

Form the female chest and fix to the body. Glue the female body to the polystyrene cone and cover the cone with white modelling paste to make the skirt 

Step 37

Now roll a thin sheet of white modelling paste and form some frills and pleats 

Step 38

Glue the pleated skirt around the waistline and add shape and form with a modelling tool.

Step 39

Now pleat a pink sheet of modelling paste and cover the white skirt

Step 40

Blend the skirt well with the upper body 

Step 41

Cut a rectangular piece in pink with sweetheart neckline to make the bodice and glue it to the upper body, blend well at the back

Step 42

Make the hands and form the fingers.

Step 43

Glue the arms on the body and blend it over the shoulders 

Step 44

Take some brown modelling chocolate and roll an elongated piece, then cut thin triangular strips and twist for the hair.

Step 45

Secure it over the head with some glue 

Step 46

Using the same chocolate paste add fringes.

Step 47

Texture the hair with the Dresden tool. Roll a thin white strip and add a bow around the waist.

Step 48

Add some edible red gel colour to white modelling paste to make red or use pre-coloured modelling paste 

Step 49

Roll a thin sheet of the red paste and cut heart shapes using heart cutter 

Step 50

Glue the hearts on the hands of the man

Step 51

Glue one heart on the envelope 

Step 52

Place one heart over a brown square made with modelling paste to make the stamp 

Step 53

Using black edible pen paint the print over the stamp and crimp the edges.

Step 54

Write any imaginary address to give a personal touch 

Step 55

Cover a 10” round cake with Saracino Pasta Top and decorate with some hearts 

Step 56

Now place the male figurine in the envelope and glue it over the cake, place the female figurine beside him and your “Valentine Cake” is now ready to be served with love 

VALENTINE’S CAKE POPS TUTORIAL

VALENTINE’S CAKE POPS TUTORIAL

Skill level: INTERMEDIATE

Chocolate tempering:

White Chocolate:

Heating to 40-45 degrees, cooling to 24-25 degrees, final temperature 27-28 degrees.

Milk chocolate:

Heating to: 40-45 degrees, cooling to 27-28 degrees, final temperature 30-31 degrees.

Dark chocolate:

Heating to: 45-50 degrees, cooling to 28-29 degrees, final temperature 31-32 degrees.

You will need:

INGREDIENTS:

  • Saracino Chocolate drops white 250g
  • Saracino Food Flavouring Pistachio
  • Saracino Pasta Model Pink
  • Saracino Pasta Model White
  • Saracino Dust powder Pink
  • Saracino Gel color Pink
  • Saracino Gel color Black
  • Saracino Cakegel
  • Plain cupcake mix, butter and eggs
  • Sprinkles

EQUIPMENT:

  • Silicone popsicle mini ice cream mould (Silikomart)
  • Popsicle sticks
  • Food thermometer
  • Pan with a thick base
  • Heatproof glass bowl
  • Marble or natural stone slab for chocolate tempering 
  • Spoon
  • Pallet knife
  • Brush
  • Pastry bag
  • Rolling pin
  • Dresden tool
  • Knife
  • Ball tool
  • Round cutter diameter 45mm
  • Leaf cutter 20 x 25mm
    •  

Step 1

Using the Bain Marie technique melt the Saracino chocolate drops. Make sure everything is melted and has a temperature between 40 and 45 degrees. Check the temperature of the chocolate with a food thermometer. Pay attention! The temperature rises quickly. The bottom of the bowl should not touch the hot water. Make sure that no water gets into the chocolate.

Step 2

Now temper the melted chocolate. In this case, you are going to reduce the temperature of the melted white chocolate to 24 to 25 degrees. Do this by working with a pallet knife on a marble or natural stone surface. Use a food thermometer to check the temperature. When you have reached the temperature of 24 to 25 degrees, you heat the chocolate again to 27 to 28 degrees back in the bowl over the water. Pay attention! Tablating or tempering is a cooking technique in which melted chocolate is cooled back, so that crystals are formed in a certain way, which gives the chocolate a structure. This structure is obtained by heating the chocolate above 30°C, causing three of the four crystals to melt. Work meticulously with the temperatures for the best end result. This tutorial includes an overview of the temperatures for tempering white, milk and dark chocolate.

Step 3

Take your silicone ice pop mould and pour a heaped tablespoon of melted chocolate into it. Turn the mould around in a controlled manner so that the chocolate runs along the edges of the mould.

Step 4

Make sure all sides of the mould are covered with chocolate to the edges.

Step 5

Repeat steps 3 and 4 for each section of the mould. For a nicer end result it is better to fill each part separately with chocolate. If you want the chocolate base to be a bit thicker, repeat steps 3 and 4 again for all 4 ice pop shapes.

Step 6

Remove excess chocolate with a pallet knife. Make sure the top edge is nice and smooth.

Step 7

Let the chocolate set in the mould at room temperature.

Step 8

Bake pistachio cupcakes. Make cupcake batter according to the recipe. Add the Saracino pistachio flavouring in proportion to the batter. Bake the cupcakes. Let them cool and crumble 3 cupcakes into a bowl. For 4 cake pop ice creams, take 3 cupcakes made of 35g batter each.

Finely chop pistachio nuts as desired and mix with the crumbs.

Tip: You can play with the flavours. Saracino have 15 to choose from!

Step 9

To achieve a nice workable filling, add 1 tablespoon of Italian Meringue Buttercream or white ganache to the pistachio crumbs. Knead everything well together and divide into 4 equal portions.

Step 10

Using a spoon, gently press the cake mixture into the mould.

Step 11

Carefully slide the sticks into the cake pop through the hole in the mould.

Step 12

Make sure the cake is not above the top surface of the mould and that the top of the cake pop is as smooth as possible.

Step 13

Temper a small amount of white chocolate and cover the top. Smooth with a palette knife and remove any excess chocolate.

Step 14

Let the chocolate set at room temperature.

Step 15

When everything is set, remove the cake pop ice creams from the silicone mould.

TIP: You can put the mould in the freezer for 5 minutes before removing the cake pops.

Step 16

Take a 20 x 25 mm leaf cutter and cut out the shape for the forehead. Use a sharp knife to form the side hair. Keep these cut-out parts. 

Step 17

Shorten the area for the nose by a few millimetres. Take 30g of white Pasta Model. Roll out to 2mm thick and cut out a circle with the cutter and stick the pink part on top with cake gel.

Step 18

Use the pink drop shapes previously cut out to make ears. Roll out a small amount of white Pasta Model thinly and cut out two drop shapes with the leaf cutter. Stick them on the pink part and round off the bottom. Also use the leaf cutter for this. Using your ball tool make two indents in the head where the eyes will be

Step 19

Colour a small amount of white Pasta Model with the black gel colour. Roll two oval balls of 3mm in size for the eyes and one oval ball of 5mm for the nose. Place on the face. Use cake gel to fix.

TIP: You can also use the pre-coloured Pasta Model Black.

Step 20

Dust the tips of the ears and the top of the head with the pink dust powder.

Step 21

For the tail take 10g of pink Pasta Model and roll into a sausage shape. Cut into 2 equal parts. Repeat this step with 10g of white Pasta Model. Stick a pink and white part together with cake gel to form a tail. Leave the white end part a little bit thicker. Use the Dresden tool to add texture to the tail.

Step 22

Dust the middle part of the cake pop ice cream with pink dust powder. Dust so darker in the middle getting lighter outwards.

Step 23

Attach the head and tail to the cake pop ice cream with cake gel. Do not use too much cake gel! You can also attach the parts with melted chocolate.

Step 24

For the heart you will need a small ball of pink Pasta Model. Flatten with your finger and form a notch on one side with a Dresden tool. With your fingers make a point on the other side. Dust the top with pink dust powder.

Step 25

To decorate your cake pop ice cream with chocolate, melt a small amount of white chocolate. While heating, add pink dust powder until you reach the desired colour. Temper the chocolate as shown previously.

Put the chocolate into a piping bag with a small piping nozzle. Pipe lines over the bottom part of the cake pops. Decorate immediately with sprinkles.

Step 26

Vary with different looks. Use your imagination!

Use colours you want to achieve the look you love.

CHOCOLATE MOUSSE AND BISCUIT DESSERT

CHOCOLATE MOUSSE AND BISCUIT DESSERT

Author: Justyna Kowal

Skill level: BEGINNERS 

You will need:

  • Saracino raspberry food flavouring La Supreme
  • Saracino vanilla food flavouring La Supreme
  • Saracino milk chocolate drops
  • Saracino dark chocolate mirror glaze
  • Saracino gold push pump powder
  • Saracino gold glitter
  • butter
  • icing sugar
  • sugar
  • cinnamon
  • egg
  • plain flour
  • double cream
  • gelatine
  • Rice Krispies
  • plums
  • pectin (jam sugar)
 

Step 1

Prepare all your ingredients. Make sure they are all at room temperature. For the equipment you will need a small pan, spoons, 2 silicone moulds (one for the centre and one for the heart mousse), baking paper, food mixer, blender, circular cookie cutter, silicone spatula, piping bag, rolling pin, cup, sugar thermometer, wood skewers, sieve and a kitchen scale.  

Step 2

Add 250g plums to the pan.

Step 3

Cook and blend plums until a smooth consistency is achieved. 

Step 4

Add a table spoon of sugar, a tea spoon of pectin and a tea spoon of La Supreme vanilla flavouring. Bring to the boil for a few minutes stirring the mixture so it does not burn.  

Step 5

Pass the cooked mixture through the sieve to remove any lumps and plum skin.

Step 6

We will be using this mixture for the centre part. Fill the small mould and freeze. 

Step 7

For the cookies (base) prepare 170g plain flour, 20g icing sugar, tea spoon of cinnamon, 1 egg, 100g soft butter. Put the oven on to 190C

Step 8

Place all the ingredients in the bowl

Step 9

It is important not to over knead mix. The ingredients just need to be combined.

Step 10

Roll the dough and cut the circles using your cookie cutter

Step 11

Bake at 190C for about 10-12 minutes until a gold colour is achieved. Cool them on a rack.

Step 12

Now to get the ingredients ready to make the mousse. You will need 150g milk chocolate drops, 2 tea spoons of gelatine, 700g double cream, half a tea spoon of cinnamon, Vanilla food flavouring La Supreme. 

Step 13

Pour 200g of cream into a pan, add chocolate drops, cinnamon, and a tea spoon of vanilla food flavouring. Heat and stir until the chocolate is fully melted. 

Step 14

Add 2 tea spoons of gelatine to a bowl and add 2 table spoons of cold water. 

Step 15

Add the melted gelatine to the pan with the chocolate. Stir and let it cool down. 

Step 16

For the base of our mousse prepare 150g of milk chocolate drops and 20g of cornflakes 

Step 17

Melt the chocolate in the microwave or over a water bath and allow to cool down. 

Step 18

Add cornflakes and stir quickly. 

Step 19

Pour the mixture on to a sheet of baking paper, flatten and put into the fridge. 

Step 20

Allow to set and then remove from the fridge to cut circle bases. You want the base to be slightly smaller than plum mixture circle. 

Step 21

For the mousse pour 500g of double cream into a bowl and mix until it has thickened.

Step 22

Get the chocolate and spatula ready 

Step 23

Add half of the cream into your chocolate and using your spatula stir. 

Step 24

Add the other half of the mixture and stir

Step 25

Pour the mixture into the piping bag

Step 26

Add to the heart shaped moulds up to two thirds height in the mould. 

Step 27

Remove your frozen plum mixture and get the crunchy bases ready. 

Step 28

Add the frozen plum mixture to the mousse. 

Step 29

Add the crunchy base over the plum mixture and gently press. 

Step 30

Pipe more mousse mixture to fill each mould. Place in the freezer.

Step 31

Place your cookies on the mini cake boards. You can add a bit of jam at the bottom to stop them moving. 

Step 32

Prepare your mirror glaze, gold pump spray and glitter.

Step 33

Place a sheet of foil on your table and position your cooling rack over. Place the frozen hearts on the rack. 

Step 34

Heat the mirror glaze to a temperature of 40C. Heating slowly. Pour heated mirror glaze over each heart making sure they are fully covered. 

Step 35

Using your wood skewer keep moving the hearts over the rack to remove any excess mirror glaze. Then place each heart on a cookie. 

Step 36

Decorate using Saracino gold pump spray and gold glitter  

CHRISTMAS SURPRISE  BOX

CHRISTMAS SURPRISE BOX

Skill level: BEGINNERS

You will need:

  • Cake or dummy 20x20cm

  • Saracino white chocolate drops 

  • Cream for ganache
  • Saracino white Pasta Top (sugarpaste/fondant for cake covering)

  • Saracino CMC

  • Saracino Cake Gel Glue

  • Saracino concentrated colour gel green, red, brown, yellow and black

  • Saracino Push pump glitter dust red

  • Saracino powder food colouring brown,pink and yelow

  • Cake drum

  • Soft brushes

  • Cocktail sticks

  • Modelling tools

  • Ruler

  • Fondant knife

  • Set of round cutters

  • Smoother

  • To download the template click on the picture below

Step 1

Cover cake with ganache made using Saracino white chocolate drops and cream

 

Step 2

To achieve the colour we need for the cake covering mix Pasta Top sugarpaste with yellow and brown gel colour. 

Step 3

Keep adding the yellow and brown gel colours to achieve beige colour. Always start with a small amount of gel colour. It easy to add more if you need but more difficult to take off 

Step 4

To cover the top of the cake roll out Pasta Top sugarpaste/fondant and cut out a square the same size as your cake. Place on top of the cake.

Step 5

For the sides of the cake roll out Pasta Top sugarpaste and cut out 4 pieces to the size needed for your sides. You will need to make each side higher than your cake to form an open box look.

Step 6

Cover each side with sugarpaste. 

Step 7

Using muesli or rice krispies melt in the microwave with marshmallow to make a modelling material. Careful not to put the marshmallow in the microwave for too long as it will burn easily. Print off your template.

Step 8

Using the template form the body of the gingerbread man 

Step 9

Follow the same steps to form the head

Step 10

Ganache the body and head. Colour the sugarpaste with brown and roll it thinly. Cover the body.

Step 11

Cover the head with the same brown paste. It may look lighter in this picture but that is just due to camera and lighting angles. Using your modelling tools form the smiling mouth.

Step 12

For eyes shape black sugarpaste into teardrop shapes. Roll them to achieve the shape on your printed template. 

Step 13

Using white sugarpaste add a bit of effect as shown.

Step 14

Fix eyes to the face. Make a nose using red fondant. For the cheeks shape two hearts using pink fondant.

Step 15

Using a cake smoother roll out a thin sausage with white sugarpaste

Step 16

Attach it to the top of the head creating a wave of snow

Step 17

Using your modelling tools create a deeper smile. Fix the black tongue. Position your nose on the face to see if it the correct proportion. Do not fix yet!

Step 18

Roll out black to a thin sausage shape and insert to define the mouth and eyebrows. Fix the cheeks.

Step 19

Make a bow with red fondant and decorate with white dots. Use your template to achieve the bow size and shape. Use a small amount of red paste to colour the tongue.

Step 20

Remove the nose from the face and spray with Saracino pump-up red glitter 

Step 21

Also spray the bow and put aside

Step 22

For the gingerbread man arms add cmc to a small amount of brown sugarpaste. Shape to the arm size on your template. 

Step 23

Roll thin sausage using white sugarpaste and create waves on the ends

Step 24

Attach the nose and dust the cheeks with pink powder colour. Fix the head to the body using edible glue and cocktail sticks.

Step 25

Using black powder colour shade the eyes

Step 26

You will now need yellow, blue and red baubles. You can use pre-coloured paste or add gel colours. When you are ready add a little CMC to each colour.

Step 27

Roll out the sugarpaste and cut a circle 

Step 28

Using your finger or thumb smooth the edges of the circle 

Step 29

Keep it nice and circular as shown. Now repeat for the blue and red.

Step 30

For the Christmas lights add CMC to yellow sugarpaste and roll teardrop shapes. 

Step 31

Repeat for blue and red lights. You will need a few of each colour. You can decide how many lights you would like.

Step 32

For one bigger Christmas bauble roll green paste into a ball

Step 33

Shape it into a cone

Step 34

For the upper part of the Christmas bauble mix white sugarpaste with black gel colour to achieve light grey. Then roll it and cut a strip.

Step 35

Cut out the shape shown for the top of all the baubles

Step 36

For upper part of larger Christmas bauble knead some grey paste with cmc and create a ball. Flatten it with your fingers and make two groves with modelling tools. 

Step 37

Fix them to the top of each bauble using a little edible glue. This is how they should look

Step 38

To make little hangers roll out black paste into a thin sausage and fix to the upper part of the Christmas baubles.

Step 39

Using white fondant roll some lines and add to the baubles 

Step 40

To make the candy canes roll a thin sausage shape using white and red paste. Both sausages need to be the same diameter.

Step 41

Create a hook shape at the top of each cane.

Step 42

Using a sharp blade cut both in small diagonal regular pieces. Connect together using small amount of cake gel or a little water. You need to alternate the red and white to form the candy stripe as shown.

Step 43

Using yellow powder colour shade the edges of the yellow bauble. Use a modelling tool to form lines in the top grey piece of each bauble.

Step 44

Repeat with other baubles and Christmas lights

Step 45

Using red powder colour add some shading to candy cane 

Step 46

Mix brown, yellow and orange powder to dust the box corners.

Step 47

Your box should look like this.

Step 48

Now for the open lid of the box. Using the same sugarpaste used to cover the box, roll it and cut a smaller rectangle with the width matching the front of the cake. Shade the edges and fix to the cake to make the ‘open box’ effect

Step 49

So it looks like this when fixed. Repeat for the three other flaps of the box. Allow to go hard the CMC will help this. 

Step 50

Position and fix your gingerbread man to the top of the box. Now fix one arm. You can use edible glue and if needed a cocktail stick.

Step 51

Colour the Christmas bauble with green glitter and add a line of white sugarpaste. Fix the green bauble to the arm and body.

Step 52

Fix the other arm so it is in a position where it looks like it is holding the large green bauble.

Step 53

Fix the bow to the top of the head.

Step 54

Add the Christmas baubles inside the cake 

Step 55

Roll a thin green line and create the light cable. Fix on the cake as shown. 

Step 56

Cover the cake board with red sugarpaste and sit the cake on the board  

Step 57

We have used a mould with green fondant to create the greeting. Fix to the side of the cake.

Step 58

Add the candy canes. The canes can be decorated with holly if you want to add more detail. Extend your Christmas lights onto the board as shown.

Once the sides of the box have set fix them to the top of the open box. You may need to support the flaps temporarily whilst they dry into an open position as shown.

Step 59

Your cake is ready!

CHRISTMAS COOKIES CAKE

CHRISTMAS COOKIES CAKE

Skill level: INTERMEDIATE

TIP – You can cover your two tiers with Saracino Pasta Top. To learn how to cover your cakes and create sharp edges follow the link

HERE – for picture tutorial 

HERE – for video tutorial 

You will need:

  • 2 dummies of 15 and 20cm or 2 cakes (you can make a cake decorated with cookies or simply present the cookies in a more original way, on the dummies instead of on a classic tray)

  • Cake drum

  • Saracino fondant Pasta top to cover dummies or cakes

  • Saracino Royal Icing Mix

  • Sieve

  • Corn starch

  • Rolling pin

  • Baking paper

  • Piping bag

  • Number 1 piping nozzle

  • Scissors

  • Pencil

  • Micro-perforated mat

  • Snowflake cutters

Step 1

Sprinkle the work surface with corn starch to roll the fondant and keep it from sticking.

Step 2

Place the layer of fondant on a cake drum that has a small amount of water so that it sticks.

Step 3

Trim excess edge.

Step 4

Roll out more Saracino Pasta Top and cover the dummies or cakes. Remember to always sprinkle the work surface before rolling the fondant so that it does not stick. Remember to also moisten the dummies or cake so that the fondant sticks. No need to over wet it, just moisten it lightly.

Step 5

Smooth and apply the fondant to the surface of the dummy or cake using cake smoothers. Trim off the excess from around the bottom.

Step 6

Don’t worry if the surface isn’t perfect. The imperfections will be covered for the most part by the decoration that we will make with the cookies.

Step 7

Place one tier on top of the other. If you have used dummies, just stick them together with a little corn syrup (you can include a cocktail stick or dowel to fix it better). If you are using real cakes, remember to place a cake board beneath the top tier and use dowels for support.

Step 8

Draw little houses on the baking paper. Bear in mind the height of your tiers and decide on the sizes you would like.

Step 9

You can make as many shapes and sizes as you want but remember that you can repeat patterns (otherwise you will spend a lot of time cutting out shapes). You must bear in mind that you should not make them excessively wide so that they adapt better to the curvature of the cake.

Step 10

Cut out the little houses that you have drawn

Step 11

Roll out the cookie dough to an even thickness (5mm thick). Place the shapes you have cut out on the cookie dough. You can use the classic shortbread dough, gingerbread cookie dough, honey cookie dough … But don’t forget that the dough must always be very cold to handle.

Step 12

Cut the houses using a sharp blade.

Step 13

Place the cut cookies on a cookie sheet with a micro-perforated mat and put them in the freezer for 5-10 minutes. This will prevent them from losing their shape during baking. Meanwhile, preheat the oven to 180ºC (356 ° F).

Step 14

Also cut some snowflakes and do the same, put them in the freezer for a few minutes.

Step 15

Don’t throw out the dough scraps! Knead them again (not too much so that the gluten does not develop and the cookies are puffed in the oven) and roll them again. Remember to cool the dough very well before using it.

Step 16

Bake the cookies at 180ºC (356 F). Baking time depends on the size of the cookies. It usually ranges between 10 and 15 min. It depends on how dark and crisp you like them. When you take them out of the oven, flatten them with a smoother. You must do it as soon as you remove them, before they harden completely.

Step 17

Transfer the cookies to a cooling rack and wait until they are completely cool before decorating.

Step 18

Make the royal icing. Follow the instructions on the package (we must make a rather firm royal icing so that it does not flow when piped). It is not necessary to add flavors as it is delicious as is.

Step 19

Beat with the paddle at low speed so that it does not air too much and check that it is well uniform, white and shiny.

Step 20

Place the nozzle in the piping bag and fill with the royal icing. Start decorating the cookies. Make a large snowflake to place on top. Let yourself go with imagination! Make the shapes and decorations that you like the most on the cookie.

Step 21

You can make lines, dots … but for that shape to be maintained remember that it is important to have a good piping consistency with your royal icing. We dont want it too runny so it runs.

Step 22

Make other sizes of snowflakes, some smaller to fit in the spaces between houses

Step 23

Decorate the houses. Outline the area of the roof to later fill and simulate snow.

Step 24

Fill in the roof and make windows and a door

Step 25

Put some royal icing on the windows, it will give more winter and Christmas feeling.

Step 26

Do the same with the other houses. Make up different decorations!

Step 27

You can also add royal icing to the base of the cookie, it will look like the ground is snowy when you place them on the cake.

Step 28

Let the royal icing dry well before placing the cookies on the cake.

Step 29

As the large snowflake will be placed on top of the cake, we must fix a wooden skewer to the back of the cookie. We will stick it with icing. We put a little on the back of the cookie.

Step 30

Then we will place the top of the skewer onto the cookie and finish covering it with more royal icing. Let it dry very well before using it so that it does not come off.

Step 31

To stick the cookies to the cake, we will put a little royal icing on the back of each one. It will be enough to keep it glued but remember that you must let it dry so that it does not fall off.

Step 32

Place the first cookie and press lightly to set it.

Step 33

Continue placing the other houses, as well as the snowflakes. Keep the flakes pressed for a few seconds since they are not supported on the base of each tier, they could slip.

Step 34

To give a volume effect, place some lower houses in front of the tall ones.

Step 35

Let dry so that they do not fall when moving the whole set.

Step 36

Insert the large snowflake and place the houses on the top. You can put skewers on the back of the houses in the same way you did with the large snowflake. This will make it easier for you to keep them standing.

Step 37

Put some royal icing on a sieve

Step 38

Do your Christmas magic! Sprinkle on the cake and contemplate the beautiful effect you get!

Step 39

Your cake is ready to be served. Enjoy and Merry Christmas!