MACARONS WEDDING TOWER

MACARONS WEDDING TOWER

Skill level: BEGINNERS

Recipe:

www.indulgewithmimi.com​ 

You will need: 

  • Saracino almond flour
  • Icing sugar
  • Caster sugar
  • Eggs
  • Buttercream
  • Saracino raspberry flavouring
  • Saracino coffee flavouring
  • Saracino gel colours – Pink
  • Pinch of salt or cream of tartar

Optional ingredients:

  • Jam
  • Titanium dioxide
  • Other Saracino food gel colours

Equipment:

  • Oven
  • Mixer with whisk attachment
  • Silicone Spatula
  • Glass or metal bowl
  • Sieve
  • Piping bags and nozzles no. 10/12
  • Baking tray – flat
  • Silicone/ Teflon mat or baking paper

 

Step 1

Clean all your equipment with vinegar to take away any possible oil residue.
Separate the egg whites. Weigh all the ingredients. Combine almond flour with icing sugar. Add a pinch of titanium dioxide to the egg white (not essential but i like it for more of a pastel look).

Step 2

Add a pinch of salt or cream of tartar to your egg whites and start whipping, meanwhile sift your almond flour and icing sugar.

Step 3

Once your egg whites start looking frothy start adding caster sugar 1⁄3 at a time leaving around a minute in between adding each 1/3.

Step 4

Keep whipping on medium until we achieve soft peak consistancy.

Step 5

Add the colouring and increase the speed to a higher number for the last minute or two.

Step 6

Carefully watch your meringue mixing in the bowl. When it balls in your whisk stop and check. You want to achieve stiff peaks.

Step 7

Add 1⁄2 of the almond and icing sugar mix to your meringue and gently fold it in (fold dont mix you don’t want to deflate it at this stage).

Step 8

Add the second half of the almond and icing sugar mixture and now you fold and slide your spatula through the middle of your mixture pressing against the bowl as you want to deflate some of that air but not all of it. Your mix should be getting more shiny and runnier.

Step 9

Your mix should be flowing nice and gently from the spatula.

TIP: You can do a figure of 8 test – take some mix onto your spatula. Draw a number 8 slowly with the mix into the bowl. Flowing off the spatula (we dont want it to all fall off at once). If you manage to draw the whole number 8 then it is ready.

Step 10

Prepare your piping bag and Wilton size 12 round piping nozzle. If you don’t have anyone to hold your piping bag open place it into a tall glass or similar for support. If you are experienced in piping you can go for a larger nozzle. I like this one as it gives you more accuracy when piping the circles.

Step 11

Add the mixture to the piping bag and start piping. Keep your bag vertical to the mat. Gently squeeze to the middle of the circle and don’t move the bag around as the batter will spread itself. When it reaches the circle line on the mat stop squeezing. Flick the nozzle tip or do a quick small rotation. Do not pull directly upwards as this will leave a little bump in the middle.

Step 12

Your silicon mat is to be on your baking tray. Tap your tray on the counter several times to pop any air bubbles.

Step 13

The surface should be pretty smooth after step 12 but it will get even smoother after resting. Preheat the oven to 150c and leave your tray for about 30 to 45 min (depending on the humidity this maybe longer). We want the macarons to form a skin. Check after 30 minutes and add time as necessary. To check if they are ready to bake gently touch the top of the macaron, if it’s not sticky to the touch it is ready to go into the oven. Add for 20 minutes turning the tray halfway through the baking process.

Step 14

Before removing them from the oven gently nudge one of the macarons to check if it’s ready to come out. If it still wiggles, give it another minute or two. Remove from the oven and let them cool completely before removing the mat. Remember to peel the mat from the macaron not the other way round.

Step 15

Now the macarons are ready, it’s time to fill them up with a flavour of your choice. You will need your favourite buttercream mix and Saracino natural food flavouring. For this tower I have used a raspberry buttercream and a coffee buttercream. I find it easier to pair the circles before piping with one facing up and one facing down.

Step 16

For this tower I used 250g buttercream and 50g of Saracino raspberry flavouring. I find the coffee flavouring stronger so to another 250g of buttercream I only use 30g of the flavouring (this is to personal taste). Mix together and transfer to a piping bag with nozzle no. 10/12 (it is not necessary to pipe but this does give a cleaner and more professional look). I like to add something to the centre so I have raspberry jam in another piping bag.

Step 17

If you adding the jam in the centre, pipe a circle of buttercream a millimeter or two from the edge and add the jam in the middle. If you are not using the jam just pipe the buttercream in the centre of your macaron.

Step 18

Repeat step 17 for all of your colours and flavours if you have a different ones. This one is caffe latte – vanilla buttercream with coffee buttercream centre.

Step 19

Sandwich the halves of your macarons together Place them  let them in the fridge for 24h. You are then ready to arrange and enjoy.

Step 20

Stack them on a macaron tower if required. Let your imagination go wild on how to display them.

BANANA & CHOCOLATE BUNS

BANANA & CHOCOLATE BUNS

Author: Justyna Kowal

Skill level: BEGINNERS 

You will need:

For dough: 

  • 600g plain flour
  • 15g dry yeast
  • 60g sugar
  • 80g butter
  • 4 egg yolks
  • 270g milk
  • pinch of salt
  • 2 tsp of Saracino Le Supreme Vanilla food flavouring

For filling: 

  • 4 large well ripened bananas
  • 120g butter
  • 90g sugar
  • 130g Saracino milk chocolate drops
  • 130g Saracino dark chocolate drops
  • 2 tsp of Saracino Le Supreme Banana food flavouring

For icing: 

  • 200g icing sugar
  • 30g water

Step 1

Prepare all your ingredients. Make sure they are all at room temperature.  

Step 2

Pour flour to a big bowl

Step 3

Add yeast and salt

Step 4

Add sugar

Step 5

Melt butter and let it cool down. Warm your milk but don’t boil it.

Step 6

Add all the dry ingredients to your food mixer bowl and combine. 

Step 7

Add milk and melted butter

Step 8

Add egg yolks

Step 9

Add two spoons of vanilla food flavouring Le Supreme 

Step 10

Mix all the ingredients for around 10 minutes until well combined 

Step 11

Dust a bowl with flour and add the dough. Cover with cling film. Leave it in a warm place until it doubles in size. 

Step 12

Prepare all your ingredients for the filling

Step 13

To a ceramic or glass bowl add chocolate drops, butter and sugar. Melt everything in the microwave or over a pan of boiling water. Let it cool down

Step 14

Add bananas to your blender

Step 15

Blend until smooth

Step 16

Get your chocolate mix ready and Saracino Le Supreme banana food flavouring 

Step 17

Add the chocolate to the blended bananas

Step 18

Add 2 tsp of banana food flavouring.

Step 19

Blend all together 

Step 20

Leave it aside and allow it to thicken

Step 21

Remove the film from the bowl and place the dough on a floured surface

Step 22

Knead it but not for long

Step 23

Roll it to a rectangle so the length is double the width.

Step 24

Spread a layer of the chocolate mixture and add slices of fresh banana

Step 25

Add milk and dark Saracino chocolate drops 

Step 26

Roll the dough starting from the shorter side. Be careful not to rip the dough

Step 27

Keep rolling until fully rolled with the joint at the bottom.

Step 28

With the knife cut slices around 3cm thick

Step 29

Put baking paper on your baking tray. Place the buns remembering to leave sufficient space between them as they will increase in size. Apply cling film over the top (don’t press) and leave it for 30 minutes in a warm place

Step 30

Remove the film. Place them in a pre warmed oven at 190C and bake for 25 minutes

Step 31

They should be baked until a golden colour

Step 32

Prepare icing sugar and water

Step 33

Mix until a medium consistency is achieved. If it is too runny add some more icing, if it is too thick add a drop of water

Step 34

Add to the piping bag and cut the end

Step 35

Pipe the icing over the top of the buns

Step 36

Voila they are ready!

HAND PAINTED WEDDING CAKE TUTORIAL

HAND PAINTED WEDDING CAKE TUTORIAL

Author: ANGELA PENTA

Skill level: ADVANCED

You will need:

INGREDIENTS: 

  • Pasta Top Black

  • Pasta Model White, Red, Light blue and Yellow

  • Powder colours Skin tone, Black, Yellow, Red, Sky blue, Blue and White

  • CMC

  • Cake gel glue

  • Shiny Effect Confectioners Glaze

EQUIPMENT: 

  • 4×4″ round cake or dummy

  • 6×8″ round cake or dummy

  • 9″ round cake board

  • Black ribbon

  • Large and small rolling pins

  • Fondant Smoother

  • Flexible fondant smoothers

  • Ruler

  • Knife

  • Craft knife

  • Palette knife

  • Stars and heart plunger cutters 

  • Small ball tool

  • Brushes

  • Paintbrushes

  • Cocktail sticks

  • Small plastic dishes

  • Clear alcohol

  • Corn starch

Step 1

For this project we need 2 dummies (or cakes) 4×4″ round, 6×8″ round and a 9″ round cake board that will be covered with black Pasta Top.

TIP 1: Pasta Top is Vegan, Gluten free and has NO hydrogenated fats. It’s very stretchy and can be rolled very thin.

Step 2

Roll out the paste large enough to cover each tier.

Step 3

Roll the black Pasta Top thinly. You can use a little corn starch on your work surface so it doesn’t stick (but not too much to stain the black paste)

Step 4

Brush the dummy with water and put the paste on top of the dummy as shown

Step 5

Using a smoother press on top to make it smooth and with the hands smooth the paste down the sides of the cake

Step 6

Use the same process to cover the other tier and create sharp edges using flexible fondant smoothers

Step 7

Brush the cake board  with water, roll out the black Pasta Top and cover the cake board

Step 8

Smooth the surface with a smoother to remove any air bubbles

Step 9

Trim the excess paste from around the board using a craft knife

Step 10

Add the black ribbon around the cake board

Step 11

Assemble the cake as shown in the picture

Step 12

Use a ruler to measure the size of the pop art inspired illustrations and print them, these images will be used as a template

Step 13

Let’s start with the painting, we need the printed illustration, Pasta Model white, CMC and powder colours skin tone, black, yellow, red, sky blue, blue and white

Step 14

Add a little bit of CMC to the paste to help it become firmer.

Step 15

Roll out Pasta Model to about 3 mm thick, it must be larger than the printed image

Step 16

Place the printed image over the paste and using a small ball tool, trace outlines on the paste

Step 17

Use craft knife to cut out the shape

Step 18

Begin by painting light colours, mix skin tone and white powder colours with alcohol and paint faces and hands

Step 19

Continue painting with light colours, for yellow mix yellow and white powder colours and dilute with alcohol

Step 20

Mix sky blue and white powder colours with alcohol and paint the bright reflections of the hair, you don’t need to be precise because we will define the design later with black

Step 21

Complete by painting the red and blue areas using the red and blue powder colors diluted with alcohol

Step 22

Mix black powder colour with alcohol and paint using a fine brush

Step 23

Using the picture as reference paint the design on the paste using the black powder colour mixed with alcohol

Step 24

Once the painting is complete, paint the sides with black powder colour diluted with alcohol

Step 25

When the painting is dry we can glue the piece on the cake using Cake gel glue

Step 26

Glue the piece on the bottom tier being careful not to touch it too much with your hands as this may damage or smudge the painting

Step 27

Roll out red Pasta Model and cut out a heart using the heart plunger cutter. Set aside.

Step 28

Mix red Pasta Model with a little bit of CMC

Step 29

Roll out red Pasta Model to about 3 mm thick

Step 30

Place the printed image on the paste and, using a small ball tool, trace the outlines of the red heart on the paste

Step 31

Do the same using the white and yellow paste

Step 32

Roll out light blue Pasta Model to about 2 or 3 mm thick and using a small ball tool, trace the outlines of the word LOVE

Step 33

Once all the shapes are traced use a craft knife to cut them out, these are all the pieces needed to make the comic heart

Step 34

Using a thin brush paint a black line on the outline and sides of the heart shape

Step 35

Do the same for all shapes

Step 36

Glue all the pieces of the comic using Cake gel glue

Step 37

Glue the word LOVE using the printed image as a reference

Step 38

Add a layer of Cake gel glue to the back of the big red heart

Step 39

Stick the comic onto the top tier, support with toothpicks if necessary until dry and then they can be removed.

Step 40

Roll out the white Pasta Model and cut out some stars with 2 sizes of stars plunger cutters 

Step 41

Using the black powder colour diluted with alcohol paint the sides of the stars

Step 42

Make about 35 stars of different sizes

Step 43

Using a brush add a little bit of Cake gel glue to the back of each star

Step 44

Glue the stars to the cake and cake board randomly

Step 45

Add a shine to the word LOVE with the Shiny Effect Confectioners Glaze

Step 46

Your cake is ready <3 

VALENTINE CUTE GOBLIN MODELLING TUTORIAL

VALENTINE CUTE GOBLIN MODELLING TUTORIAL

Author: Goda Laivyte

Inspired by Patricia Hedegaard

Skill level: BEGINNERS 

You will need:

INGREDIENTS:

  • Purple Saracino modelling paste mixed with white paste to make a pastel colour
  • Red Saracino modelling paste
  • White and pink powder colour
  • Black Saracino modelling paste

EQUIPMENT: 

  • Cake and board covered with white Saracino Pasta Top sugar paste
  • Rolling pin
  • Modelling tools including Dresden tool
  • Heart cookie cutters
  • Brushes for edible dust colours

Step 1

Roll a 35g ball of the pastel purple Saracino modelling paste for the body of the goblin.

Step 2

Roll the ball into a longer shape like shown in the picture (around 5cm long).

Step 3

Press it down with the palm of your hand to flatten it so you can easily attach it to the surface of the cake.

Step 4

Hold the shape with one hand and press from both sides at the bottom of the shape making space for attaching legs. Put aside to dry.

Step 5

For the legs we will need 2 x 18g balls of the same colour Saracino modelling paste.

Step 6

Roll one ball into a longer sausage shape.

Step 7

Roll one end of sausage shape to make it thinner.

Step 8

Bend the thicker part for the foot.

Step 9

Shape it with your fingers like in the picture for a natural look for the foot.

Step 10

Make a deep indent under the foot with your Dresden tool.

Step 11

Using your fingers roll the tip of the foot to make it sharp and bend it a bit.

Step 12

Attach the body and legs with water or edible glue to the cake.

Step 13

For the arms you will need 2 x18g balls of purple modelling paste.

Step 14

Roll two sausage shapes the same length.

Step 15

Roll one end of the sausage thinner leaving thicker part for palm of the hand

Step 16

Flatten the thicker part so you can cut and shape fingers.

Step 17

For the thumb cut a piece as shown in the picture.

Step 18

Cut to make 3 fingers. Shape fingers and palm of the hand using Dresden tool and your fingers. Repeat the same steps for the other hand.

 

Step 19

For the heart roll a ball of 20g red Saracino modelling paste.

Step 20

Roll the ball with a small rolling pin to approximately 0.4cm thick.

Step 21

Cut a petal shape, you can use a heart cutter if you have the right size, for this I needed a special size so I used a petal cutter instead.

Step 22

Cut a little triangle on top of the shape.

Step 23

Blend the edges and shape it to look like a heart.

Step 24

Attach the arms to the body holding the heart. Use a sharp tool to form a belly button.

Step 25

For attaching the head to the cake cut a short piece of wooden skewer and insert it into the cake where the head will be attached.

Step 26

For the head roll a ball of 70g Saracino purple modelling paste.

 

Step 27

Shape the head to 5cm height with 6.5cm width at the bottom and 3cm width at the top. For the mouth and chin press an indent with your finger approximately 2cm wide.

Step 28

Roll a 1cm size ball for the nose, shape and attach to the face.

Step 29

Start shaping the lips and nose using your Dresden tool.

Step 30

Using the back of your finger press across the face where the eyes will be to form the forehead shape.

Step 31

With your Dresden tool make incisions where the eyes start and finish.

Each eye is approximately 2cm wide with a 1.5cm gap between them. We want each eye 1cm tall at it’s tallest part.

Step 32

Once you have shaped the eyes cut out the residue from inside of them. Smooth the surface inside the eyes with your Dresden tool.

Step 33

For the eyes you will need to roll two balls of the same size using the black Saracino paste. 

Step 34

Roll the balls into teardrop shapes. Using your Dresden tool shape them into the eye sockets. Form the wrinkles around the eyes with your Dresden tool. Shape the lower eye lids.

Step 35

To give expression use your finger to press down the top of the eye as shown in the picture. We want to achieve a sad expression.

Step 36

For the ears you will need 2 x 15g balls of purple Saracino modelling paste.

Step 37

Roll the balls with a rolling pin to make two flat oval shapes.

Step 38

Using your Dresden tool model the ears and attach them to the head. Dust the face using pink edible dust colour and a soft brush as you can see in picture. Use your Dresden tool to give the face more feature and character. 

Step 39

Mix a small amount of the white powder colour with water. Using a very fine brush paint highlights to the eyes.

Step 40

Dust the body with the same pink edible dust as we used in step 38.

Step 41

Attach the head to the body and the cake.

Step 42

Roll and cut out two different sizes of hearts as desired for the cake and dust them with the edible dust colour. Set aside to dry. Now roll two small pieces for the tiny horns that will go on his head.

Step 43

Attach the hearts on the cake as shown. Attach the horns with a little glue or water on to the top of his head.

Step 44

Stick the double sided tape around the edge of the board.

Step 45

Stick pastel purple colour satin ribbon around the cake board. All done!

Happy Valentines day!

SUEDE EFFECT VALENTINE CAKE TUTORIAL

SUEDE EFFECT VALENTINE CAKE TUTORIAL

You will need:

Chocolate cake 

  • 130g plain flour
  • 150g caster sugar
  • 65 g cocoa powder
  • 1/2 tsp of baking powder
  • 1/2 tsp of soda powder
  • pinch of salt
  • 100g buttermilk
  • 50ml vegetable oil
  • 1tsp Saracino Vanilla food flavouring
  • 1 large egg
  • 2 tsp of instant coffee diluted in 250ml boiled water

Jelly

  • 250g cherry puree
  • 6g gelatine
  • 20g cold water 

Crunchy base

  • 100g milk chocolate with nuts 
  • 60g Feuilletine
  • 30g Saracino hazelnut and chocolate food flavouring
  • 30g Saracino peanut food flavouring 

Tiramisu mousse with coffee

  • 8g gelatine 
  • 20g water
  • 3g instant coffee
  • 50g icing sugar
  • 60g Saracino tiramisu food flavouring 
  • 500ml double cream 

Suede effect 

  • 150g Saracino cocoa butter melted with 150g Saracino white chocolate drops
  • 0.5g Saracino red powder colour 

Equipment

  • food safe paint spray
  • bowls
  • whisk
  • 7′ cake tins
  • spoons
  • baking paper
  • confectionery mould with a diameter of 12-13 cm
  • heart silicone mould
  • blender 

Step 1

For the chocolate cake. Sift the dry ingredients into one bowl (flour, sugar, cocoa, powder with soda and salt). In the second bowl, add the wet ingredients (oil, egg, buttermilk)

Step 2

Add the dry ingredients to the wet ingredients and mix briefly. Get your hot coffee and a whisk ready.

Step 3

With a slow stream, pour the coffee and mix it together.

Step 4

Pour the mixture into two low 7-inch cake tins, lined with paper for baking.

Step 5

Place in an oven preheated to 160 ° (fan oven). Bake for 25 minutes.

Step 6

After baking, cool the cakes on a wire rack.

Step 7

Now for the jelly get all your ingredients ready.

Step 8

Heat the fruit purée to about 50°C, mix the gelatine with water. Prepare a 7 inch shallow dish and cover it with cling film. Heat the gelatine mix in the microwave and add it to the puree. Combine the ingredients.

Step 9

Pour into the dish and put it in the freezer for a minimum of 6 hours.

Step 10

Prepare your ingredients for the crunchy base.

Step 11

Melt the chocolate over a water bath or in a microwave oven. Add both flavour pastes and the Feuilletine. Mix to combine the ingredients.

Step 12

We prepare a circular confectionery mould with a diameter of 12-13 cm, baking paper and a baking tray.

Step 13

Line the bottom with baking paper, then transfer the mixture. Put in the freezer for a minimum of 8 hours.

Step 14

 Get all your ingredients ready for the mousse.

Step 15

Mix gelatine with water and set aside. Measure 100ml of cream and heat it with chocolate and coffee. Stir until dissolved and combined.

Step 16

Heat the gelatine in a microwave and add to the finished chocolate and coffee mixture and combine.

Step 17

In a mixing bowl, beat the remaining cream with icing sugar and Tiramisu flavouring paste to a semi-stiff consistency.

Step 18

Then, in a slow stream, add the previously prepared chocolate-coffee mixture and gently combine with the cream.

 

Step 19

Now for stacking the cake. Pour the mousse mixture into a jug. Prepare a heart shaped silicone form, your frozen jelly, crisp base, cake and baking paper.

Step 20

Cut out a heart shape from the paper that matches the size of our mould. Place the template and cut out the heart shape in our cake and jelly.

Step 21

To assemble the cake. Place the silicone mould on a rigid base or board. Now prepare the cut jelly, cake and crispy base. Pour a little mousse into the bottom of the mould.

Step 22

First we place the frozen jelly.

Step 23

Cover the jelly with a little mousse and place the crispy base over.

Step 24

Add more mousse and place the cakes. Gently press them down and remove any excess mousse.

Step 25

Cover the finished cake with cling film and put it in the freezer for a minimum of 12 hours.

Step 26

To make a suede effect we measure out all the necessary ingredients.

 

Step 27

Melt the cocoa butter, put the chocolate in a tall dish

Step 28

Pour hot cocoa butter over the chocolate.

Step 29

Blend until combined.

Step 30

Add the red powder colour and combine with a blender.

Step 31

We are preparing our Spray Gun. Hire one from Andy. He has everything.

Step 32

Check the temperature of the mixture (it needs to be between 40-50°C).

Step 33

Take the frozen cake out of the mould.

Step 34

Pour the mixture into the tank of the spray gun.

Step 35

Spray from a distance of about 10-15 cm.

Step 36

Your cake is ready, you can also add edible gold if you want to give a different effect.