OUT OF THIS WORLD PLANET CAKE

OUT OF THIS WORLD PLANET CAKE

Author: Mabanuby

Skill level: BEGINNERS

You will need:

For the cake:

  • Saracino white Pasta Top

  • Saracino blue gel colour

  • Dummy cake (circular) about 20 cm high. Or cake with same dimensions.

  • Saracino airbrush colours: black, light blue, blue

  • Saracino gold powder colour

  • Saracino powder spray dispensers: gold and silver

  • pure clear alcohol

  • Side smoother

  • Work base

  • Stiff bristled brush

  • Airbrush

For chocolate planets:

  • Polycarbonate half circle moulds of various sizes
  • Cocoa butter
  • Saracino powder colours: gold, white, bronze, blue and copper
  • Brush with stiff bristles
  • Brush with soft flat bristles
  • Dark chocolate
  • Marble or steel worktop
  • Spatulas
  • Baking tin

Step 1

Prepare blue pasta top: Add a little Saracino blue gel colour to the Saracino Pasta Top, until an intense blue colour is obtained.

Step 2

Roll out the dough into a strip as high as the dummy / cake.

Step 3

Cover the side of the cake bringing the excess upwards

Step 4

Cut the excess and finish with the smoother.

Step 5

Roll out some more of the blue paste and cut out a circle of the exact size of the cake and close the top by blending the paste very well with the smoother.

Step 6

Prepare the airbrush colours (black, dark blue and light blue). Since these are alcohol-based colours, the high concentration of pigment is deposited on the bottom, so before use it is advisable to shake / mix well.

Step 7

With the airbrush create horizontal shades on the whole cake alternating the different colours, starting from the lightest to finish with black.

Step 8

With Gold Pearl dust diluted in pure alcohol use a brush with stiff bristles to ‘flick’ the paint onto the cake, create splashes and stains on the surface.

Step 9

With a thin tipped soft bristled brush, use the Gold colour diluted in alcohol to sketch out some irregular lines, trying to follow both the style of the colour given by the airbrush and the splashes of gold.

Step 10

Prepare the colors to be used in the polycarbonate half circle moulds (use different sizes). Melt cocoa butter, separate it into 5 different bowls, in each of them mix the following colours: White Powder, Bronze Pearl Powder, Gold Pearl Powder, Blue Powder, Copper Pearl Powder.

Step 11

With the white coloured cocoa butter use a stiff bristle brush to create splashes directly on the polycarbonate moulds. Allow to cool for a few minutes in the refrigerator.

Step 12

With the gold and bronze coloured cocoa butter use a soft flat bristle brush to completely cover some of the moulds alternating the two colours as desired, while in other moulds create streaks. Leave to cool for a few minutes in the refrigerator

Step 13

With the Blue and Copper coloured cocoa butter, use small brushstrokes to alternate the different colours to create different shades and streaks, also covering over the white droplets or over streaks of other colours created previously. Allow to cool for a few minutes in the refrigerator. There are no rules, you can play with different colours and patterns to create new and different effects.

Step 14

Prepare the dark chocolate bringing it to a temperature of 45 degrees. Proceed with the tempering of the chocolate. Pour two-thirds of the chocolate onto the marble surface. This operation can also be done on a steel surface.

Step 15

With the spatula spread the chocolate on the marble surface, and then gather again. If you want to protect the marble top, you can place an acetate sheet on the marble or wet steel surface and proceed with the tempering on the acetate sheet.

Step 16

Repeat the operation several times until the chocolate reaches 27 degrees. The movement with the spatulas is important to obtain an excellent tempering of the chocolate.

Step 17

Collect the chocolate from the work surface and return it to the bowl with the remaining chocolate, allow it to reach 29 degrees.

Step 18

Pour the tempered chocolate into the previously painted moulds.

Step 19

Tip out the excess, checking that the chocolate completely covers the half circle mould.

Step 20

Clean the mould top very well with a spatula in order to have perfect edges to each of the half circles and leave to cool in the refrigerator for a few minutes. If the correct tempering temperatures have been achieved, the chocolate will become shiny with a smooth finish as it cools down.

Step 21

When set you can remove the half circles from the moulds. To make removal easier, you can tap the back of the mould with your spatula.

Step 22

Prepare different sizes with different shades of colours.

Step 23

Using a baking tray sitting over a hot pan of boiling water, lightly touch the edge of the chocolate to the surface to melt the edge of two half balls of the same size and with similar colouring.

Step 24

Join the two halves together to create balls. Allow them to cool by placing them in the polycarbonate moulds.

Step 25

Using your hot baking tray lightly melt a part of the ball (this is getting it ready to stick to the cake).

Step 26

Stick the balls to the top of the cake, allowing the chocolate to cool and set well.

Step 27

Again using the hot baking tray lightly melt the edge of some half circles.

Step 28

Fix the half circles to the top of the cake allowing the chocolate to cool well.

Step 29

Proceed by attaching some full balls and half balls on to the sides of the cake until you have the pattern and effect you want.

Step 30

To add extra effect spray the cake with Saracino edible glitter dust. Use silver and gold.

Step 31

Finish with the addition of some silver and golden dragees (sugar balls) as you like.

RASPBERRY & ROSE MOUSSE  DESSERT

RASPBERRY & ROSE MOUSSE DESSERT

Author: Justyna Kowal

Skill level: BEGINNERS

You will need:

To prepare the jelly centre you need:

  • 250g fresh raspberries
  • 2g pectin NH powder
  • 60g sugar
  • small semi circle silicone mould approx 3cm
  • bunch of edible fresh rose petals

To prepare raspberry mousse you need :

  • 500ml of cream 30-36% fat
  • 100g raspberry puree (prepared with approx. 300 g raspberries)
  • 100g of white chocolate
  • 1 teaspoon of rose water
  • 1 teaspoon of Saracino natural raspberry flavouring
  • 10g of gelatine soaked in a minimum quantity of cold water
  • large semi circle silicone mould approx 7cm

To finish the dessert you need:

  • butter biscuits from your favourite recipe with a diameter slightly larger than the diameter of the mousse
  • Saracino raspberry mirror glaze
  • small cake tabs larger than the biscuit
  • raspberries and rose petals for decoration

Step 1

Add the raspberries and rose petals to a heavy based pan and bring to the boil with half of the sugar, add the rest of the sugar mixed with the pectin and cook until thickened.

Step 2

Pass the raspberry jam through a sieve to remove bits (you may need to press with the back of a spoon), pour into a bowl and set aside to cool

Step 3

Pour the jam into a smaller sized moulds, put it in a fridge or freezer to set.

Step 4

Pour 250 ml of the cream, white chocolate, Saracino raspberry food flavouring and rose water into a small heavy based pan and heat over a low heat until the chocolate is melted.

Step 5

Mix until smooth

Step 6

Add Saracino raspberry flavouring.

Step 7

Add soaked gelatin.

Step 8

Mix thoroughly to combine.

Step 9

Cover the surface with cling film, let it cool down on the table top and then chill in the fridge taking care not to let the sauce set.

Step 10

Add the rest of the cream (250ml) to a pan and mix in 1 teaspoon of vanilla essence.

Step 11

Whip the cream to a stiff consistency.

Step 12

Whisk the cream with the thickening raspberry-rose sauce and chocolate.

Step 13

Mix gently but make sure all the ingredients are fully blended.

Step 14

Put the mousse into the piping bag and have the larger silicone mould ready.

Step 15

Fill the larger silicon moulds with mousse up to half the height of each circle.

Step 16

Remove the previously made jelly from the fridge / freezer (make sure they are set). Place one jelly into each of the larger silicone mould circles.

Step 17

Fill the mousse to the brim by covering the jelly, level the surface, place in the freezer until set.

Step 18

Prepare the mini cake boards and the butter biscuits. Check that the mousse is completely frozen.

Step 19

Heat the mirror glaze in a microwave oven or over a Bain-marie to 40 degrees Celsius. When reached the correct temperature pour it into a jug that will make it easy to pour precisely.

Step 20

Prepare a flat tray with a rim (cake pan, tart pan) and line it with cling film. Place a glass or similar with a diameter smaller than that of the dessert in the middle and sit the frozen mousse on top of the glass. Alternatively you can place the mousses on a wire rack over a large baking tray.

Step 21

Pour the mirror glaze in a circular motion, starting from the centre of the dessert out towards the edges. Wait until the excess of the mirror glaze flows off the mousse into the dish.

Step 22

Using a spatula or knife, carefully transfer the dessert on to the biscuit placed on the small cake board, place in the fridge to keep chilled but defrost. Take the remaining glaze mixture from the foil, keep in a sealed container in the fridge ready to use again.

Step 23

Before serving, decorate desserts with raspberries and fresh rose petals.

LITTLE DRAGON CAKE TOPPER

LITTLE DRAGON CAKE TOPPER

Author: Gisi Prekau

Skill level: BEGINNERS

TIP FROM GISI:

To get fondant smooth and workable blend in some vegetable shortening (Trex).

You will need:

  • Pasta Model light blue 220g
  • Pasta Model tiffany 40g
  • Pasta Model yellow 10g
  • Pasta Model green 5g
  • Powder colours black, blue, green, white
  • Waferpaper “Zebra“
  • Floral wire 22 gauge
  • Sugar pearls 3mm
  • Alcohol
  • Cake Gel Glue
  • Wooden Skewer
  • Rolling pin
  • Balltools
  • Silicon brush
  • Piping tip 1mm
  • Scalpel / sharp blade
  • Painting palette
  • Dresden tool
  • Brush 00, Powder Brush

Step 1

Start by kneading 100g light blue Pasta Model, then form it to a 15cm long sausage shape. Make both ends of the sausage thinner as shown.

Step 2

Bend in the middle as shown.

Step 3

Pinch the upper part to a point to form the neck. Curve the tail a little.

Step 4

Use a ball tool to create indentations for the legs

Step 5

Crumpled aluminium foil creates a nice surface texture.

Step 6

For the colored design of the belly knead 10g tiffany Pasta Model and roll it out thin.

Step 7

This is placed on the tummy and slightly pressed in the middle.

Step 8

Cut off the excess and smooth the edges so it blends with the body.

Step 9

Form a belly button with the end of a modelling tool. Make horizontal stripes with a modelling tool on the Tiffany tummy.

Step 10

For the head knead 75g light blue Pasta Model and form into an oval shape.

Step 11

Using a small rolling pin or a modelling tool create a dent for the eye area.

Step 12

Pinch with your fingers to form the top of the nose.

Step 13

Insert two eye sockets with a pointed tool.

Step 14

 Model the mouth and nostrils with the dresden tool

Step 15

To give the head support insert a wooden skewer through the body and cut off leaving about 1.5cm projecting.

Step 16

Put the head onto the skewer and blend with the neck / body.

Step 17

For the coloured area of the lower jaw knead 10g tiffany Pasta Model and roll it into a slightly thicker oval. Fix it under the mouth line using edible glue to create the lower jaw and the neck.

Step 18

Cut off the excess paste and blend.

Step 19

Using a modelling tool make small indents for the teeth

Step 20

Twist 1g tiffany Pasta Model into spirals to form small horns and attach them in small holes on the left and right side of the head.

Step 21

Attach two sugar pearls in the eye sockets.

Step 22

With a modelling tool form the features of the dragon face.

Step 23

For the legs knead 10g light blue Pasta Model and roll it to a ball. Cut it in half.

Step 24

Using edible glue fix to each side of the body.

Step 25

For the feet use 2g light blue Pasta Model for each. Form a ball, flatten and form it to a tear drop shape. Cut to form the toes.

Step 26

Attach to the legs. Model and add form to the toes using a modelling tool. Create small indentations for the claws.

Step 27

For the arms take 2.5g light blue Pasta Model for each and roll to a 2.5cm long sausage shape. Bend it in the middle and make two cuts to form the fingers

Step 28

Attach the arms to the left and right side of the body. Give them shape with the modelling tools.

Step 29

You can use the end of a piping nozzle to create a scaly effect on the body, head, arms and legs.

Step 30

Roll a small amount of paste into tiny cone shapes to form the claws on the hands and feet. Fix them into the holes previously formed.

Step 31

For the inside of the wings knead 8g yellow and 8g tiffany Pasta Model together.

Step 32

Cut out a wing template to the shape you want. Roll the paste out thin and cut out two wings using your template so they match.

Step 33

Roll out 20g light blue Pasta Model to the same thickness as the inner wing. Bend two 8cm long 22 gauge wires and place them onto the modelling paste so that the ends project from the bottom of the wing – press them on gently. Now place the inner light green wings onto the blue paste and press them on gently. Cut out the blue wings slightly bigger so you have a blue strip around the inner wing.

Step 34

Texture the light green inner wing with a small ball tool .

Step 35

Roll out some light blue Pasta Model to a long string. Place it on the wings and cut to the correct length. Fix in place with edible glue to form the bones in the wing.

Step 36

Using a scalpel or sharp blade make a small cut either side of the back. Attach the wings into these pushing the wires into the body.

Step 37

Blend the base of the wing to the body.

Step 38

Cut out some small circles from the Tiffany paste and fix on the back of the wings. Form small triangles out of the light green modelling paste and fix them down the centre of the back and tail to give your dragon a crested look.

Step 39

Now for the dragon’s teeth. Roll out some white fondant to form small cone shapes, fix them into the holes previously made for the teeth.

Step 40

For the eyes mix your powder colours with clear alcohol. Using a small brush paint on a light green iris and a small black dot for the pupil. Also highlight the eyebrows using black.

Step 41

To make the little hat cut out a circle of the zebra wafer paper. Coat the back thinly with piping gel and roll it into a cone shape. The gel helps to soften the paper and at the same time acts as an adhesive on the overlapping edge. Place next to the head to check it is the correct size. Adjust as necessary and set aside to dry.

Step 42

Using 4g of the green Pasta Model roll out a ball. Place it at the base of the hat and flatten. This should be a bit larger than the diameter of the hat cone. Place the wafer paper cone onto the green circle. Use another small ball of the green paste to form the pom pom on the top of the hat. Add texture to the paste using a sharp knife. When finished fix the hat to the dragons head using edible glue.

Step 43

Finally for the finishing touches and to add definition, give your dragon a dust. Using a soft powder brush and black, green, blue, and white powder dust the dragon.

Mix also the turquoise and grey. Dust the belly, horns, arms and legs.

Step 44

Make a little bow from black paste and fix to the neck.

Ta-Da, your little dragon is ready to go onto the cake.

MR and MRS BEAVER TUTORIAL

MR and MRS BEAVER TUTORIAL

Skill level: BEGINNERS

TIPS:

Improvise with what tools you have available. Don’t have a small ball tool? Use a cocktail stick! Don’t have a small circle cutter? Use an icing tip!

If you use cocktail sticks, or anything else inedible, don’t forget to tell the recipient of your models!

You will need:

  • Modelling paste used:
  • Brown
  • White
  • Pink
  • Light green
  • Black
  • Water and paintbrush for gluing
  • Rolling pin
  • Dresden tool
  • Veiner tool
  • Ball tools in several sizes
  • Heart cutter (approx 4cm high)
  • Petal cutter (approx 4cm high)

Step 1

Take 40g of brown modelling paste and mix with 25g white modelling paste to create a lighter brown

Step 2

Use 35g if this and roll into a cone shape before shaping a ‘waist’ indent with the side of your hand

Step 3

Now make a lighter brown using 5g of white paste and a tiny bit of brown modelling paste. Mix well.

Step 4

Roll out this light brown modelling paste

Step 5

Cut out 2 shapes using the petal cutter and the heart cutter. Set the heart shape to one side for use later

Step 6

Place the petal shape onto the body and smooth the edges with your finger

Step 7

Take 5g of brown modelling paste and form into a pointed sausage as shown

Step 8

Flatten and smooth this to create the beaver tail

Step 9

Use the veiner tool to create a striped pattern in the tail

Step 10

Continue same technique in opposite direction to create a criss cross pattern and attach this to the beaver’s body

Step 11

Take 1g of brown paste and half. Shape each piece into a soft triangle and indent webbed feet with veiner tool

Step 12

Attach onto beaver

Step 13

Take 2g of the medium brown paste and roll into a sausage. Cut in half diagonally and shape little hands as shown

Step 14

Indent the hands using the veiner tool

Step 15

Attach onto the body

Step 16

Take the remaining medium brown paste, reserving just a little for ears and snout, and roll this into a ball before shaping as shown

Step 17

Take the heart you cut out earlier and using a craft knife cut as shown. Discard the lower part

Step 18

Attach this to the head, again smoothing the edges with your finger

Step 19

Use a larger ball tool to indent the eyes then use a medium ball tool to deepen the socket.

Step 20

Roll two small white balls and drop into the socket before indenting again with the ball tool and this time placing black balls into them

Step 21

Roll two, very thin, black pieces of modelling paste to use as eyelashes. Leave them long enough for a pretty flick on the outer edges

Step 22

Use the smaller ball tool to indent a hole in each eye and insert a little white ‘catch light’ into each eye

Step 23

Using the Dresden tool create a mouth. Model two little teeth out of white modelling paste, mark the centre with the veiner and place into the mouth

Step 24

Take a small piece of the reserved medium brown paste and shape into a flat oval. Mark the centre with the veiner and place onto the face. Add little dots on each side with the small ball tool before making the nose from a small triangle of black paste

Step 25

Use the little bit of remaining medium brown paste for the ears. Roll into a ball then cut with the craft knife. Indent with the medium ball tool and add a tiny ball of light brown paste. Indent again, neaten the bottom edge with the craft knife if required. Attach to the beaver.

Step 26

Glue the head into paste using a little water or if you prefer use a cocktail stick

Step 27

Mix light green modelling paste with white to create a softer shade. Roll some into two thin snakes that are long enough to reach around your beavers head. Use some to make little cone shapes, flatten these and indent with the veiner tool to create leaves

Step 28

Mix some pink modelling paste with white so you have 2 or 3 different shades of pink. Roll out, cut thin strips and roll these strips to make little flowers

Step 29

Place the green ‘snakes’ onto the beaver’s head to make a garland and decorate with the leaves and flowers. Place some flowers between her hands

Step 30

To make Mr Beaver follow these steps again from the beginning, this time without the eyelash flicks. You can match identically or, as I have done, vary the size of tail, feet etc and the shaded of brown you use

Step 31

Use a circle cutter to cut a circle of black paste for the base of his hat – make sure it will fit between his ears! Shape a shirt cylinder, with a slightly smaller diameter, for the top of the hat. Finish with a strip of pink trim and any left over flowers

Step 32

Voila! Mr and Mrs Beaver – don’t they make a lovely couple?!

“MATERIKA” PALETTE KNIFE DAFFODIL’S PAINTING

“MATERIKA” PALETTE KNIFE DAFFODIL’S PAINTING

Skill level: INTERMEDIATE

You will need:

  • A round cake of 20cm diameter/15cm high covered with 300g Saracino white modelling chocolate
  • A 24cm round cake board covered with 150g of Saracino white modeling chocolate
  • Saracino Dust colors: white, red, brown, green, yellow
  • Saracino gel colors: green
  • 500g Saracino royal icing mix
  • 100 ml Vodka
  • One pointed stainless steel or plastic palette knife
  • 1 flat medium brush
  • 1 flat big brush
  • 2/3 pcs. small piping bags

Step 1

Cover the cake and the cake board with the modelling chocolate.

Step 2

Mix some green, red and white dust color with a few drops of vodka, achieve a “paste” consistency

Step 3

Start painting the cake with red, green and white dabbing the surface of the cake

Step 4

Crumple some film and place it on the cake. Remove the film by dabbing the surface of the cake

Step 5

Paint half of the cake at a time in order to avoid drying of the colour. You should obtain a very “casual” painting

Step 6

Prepare 500g of Saracino royal icing mix. Colour a spoon of royal icing with Saracino yellow dust to obtain a deep yellow colour. Colour a spoon of white royal icing with a pinch of the previous yellow royal icing to obtain a lighter shade.

Step 7

Fill the back of the spatula with the deep yellow royal icing as shown in the picture

Step 8

First petal: Place the palette knife on the cake in the position shown.

Step 9

First press and then go down in a flat motion.

Step 10

Second petal: with the same amount of royal icing on the palette knife put the spatula in the position shown

Step 11

Go on the left with a flat motion as with the first petal

Step 12

Do another petal in the same way under the second one

Step 13

Tidy the edge of the petals with the spatula

Step 14

With a damp brush create some veins inside of the petals

Step 15

Fill the palette knife with a bit more of royal icing than before mixing the two yellows. Proceed with the fourth petal that overlaps the first petal but is more open to the left

Step 16

Tidy the edge with the damp brush

Step 17

Do another petal in the same way, using a mix of the two yellows. The edge of this petal is between the first and the second one.

Step 18

The sixth petal is put between the second and the third petal. Turn the palette knife upside down and press going up reaching the center of the flower

Step 19

Put a small quantity of yellow in the center of the flower going down with the palette knife creating a curved shape

Step 20

Tidy the center of the flower modeling it with a damp brush

Step 21

Create an open flower on the cake. Repeat the first 3 petals of the first flower but going on the right side instead of the left side

Step 22

In the same way do another three petals on the right

Step 23

Put some yellow royal icing in a small piping bag and create an oval shape in the center of the flower

Step 24

Blend the center of this shape with a damp medium brush leaving a thicker edge

Step 25

Put another bold line of royal icing on the right side of the first one leaving an hole in the middle

Step 26

Model and form the edge of this shape with a damp small brush

Step 27

Mix some green gel colour and yellow dust colour with a spoon of royal icing in order to create two different kinds of green, a medium green and a light green

Step 28

Fill just the edge of the pointed palette knife with a small quantity of royal icing

Step 29

Touch the cake just with the edge of the spatula going down from top to bottom. To achieve a thin and long shape

Step 30

Put another long shape in the same way of step 29 under the first one.

Step 31

With a small brush model the two shapes together to create a stem underneath the flower

Step 32

Fill the palette knife with some green (mix the two greens together on the palette knife) and put in on the cake in the position shown with a flat motion that goes from the top to the bottom of the cake to create a leaf.

Step 33

Model this shape with the brush creating a long stem

Step 34

Apply some more of the green royal icing to finish the stem. Tidy with a damp brush.

Step 35

Do another stem in the same way on the first flower and model it with the brush

Step 36

Repeat step 28/30 and create other leaves all around, model the edge of each leaf with the brush

Step 37

Fix the cake to the cake board.

Step 38

Divide 100g of royal icing in 3 parts and colour it with green Saracino gel, Saracino dust brown and dust red. Keep some white royal icing on one side to use later

Step 39

Mix the 3 colours together on the palette knife and paddle the surface on the cake board, ocassionaly mix some white royal icing on the 3 colours

Step 40

Put just a touch of white dust in the palette and fill the container with some drops of vodka. Do the same with some Saracino brown dust colour

Step 41

Add some touches of shadows using the brown, painting with the medium brush the stems from the bottom to the top and the inside of the open flower. Add some touches of light painting with the medium brush some white from the edges of the petals to the center of the flowers.

Step 42

Fix a “burgundy” or brown ribbon around the cake board