APPLE BLOSSOMS TUTORIAL

APPLE BLOSSOMS TUTORIAL

Author: Nicky Lamprinou

Skill level: BEGINNERS

You will need:

  • Flower paste Saracino – Pasta Bouquet
  • Non stick board
  • Small rolling pin
  • Ball tool
  • Foam pad
  • Groove board
  • Corn flour for dusting
  • Saracino Green gel colour
  • Saracino powder colours. Green – Pink – Yellow
  • Petal cutter and veiner
  • Leaf cutter and veiner
  • White flower wire gauge 28
  • Green flower wire gauge 26
  • Flower tape green – brown
  • Small head stamens
  • Saracino edible glue
  • Wire cutter
  • Paint brushes
  • Kitchen paper

Step 1

To make the centre of the blossom take about 12 small head stamens and twist a 28 gauge wire to secure at the centre.

Step 2

Lift the two sides up and twist the wire firmly with the wire cutter to keep the sides in shape.

Step 3

Take another small length of wire and wrap around the stamens as it is shown in the picture.

Step 4

Wrap the stamens and the wire with green florists tape.

Step 5

To make the petals dust the board with a small amount of corn flour. Roll out the flower paste with a rolling pin on the board over one of the grooves.

Step 6

Cut out 5 petals for each flower with a leaf cutter.

Step 7

Add some edible glue at the end of the 28 gauge wire. Insert the wire into the groove. Pinch the bottom of the petal gently to secure it to the wire.

Step 8

Move the petal onto a foam pad and thin the edges of the petal with a ball tool.

Step 9

Press each petal firmly into the veiner to form the veiner pattern.

Step 10

By using the corner of your cutter cut a small notch at the top of the petal.

Step 11

Let the petals dry overnight on a former to give definition and shape (we do not want flat petals)

Step 12

​To make the leaves roll out a small amount of green flower paste on the groove board

Step 13

Cut out leaves using the leaf cutter in two different sizes.

Step 14

Add some edible glue at the end of the wire insert into the groove of the leaf.

Step 15

Move the leaf onto a foam pad and thin the edges with the ball tool.

Step 16

Move the leaf onto the veiner and press firmly to shape the pattern

Step 17

Let them dry on a foam. If you wish you can also dust the leaves with Saracino green powder or you can use confectioner glaze, to shine the leaves.

Step 18

​To make the buds take a 24 gauge wire and make a small hook at one end. Roll a small ball of white paste and form a cone shape to create the bud. Add some edible glue to the hook and insert it into the bud. Press the bud onto the wire to secure it

Step 19

For the ‘blooming’ flowers roll out white flower paste and cut out 3 small and 3 large petals for each bud.

 

Step 20

Thin the edges with the ball tool

Step 21

Press the petals into the veiner and let them dry and form for 10 minutes

 

Step 22

Fix the 3 small petals around the bud and then the 3 large ones over the smaller petals. Use a little edible glue on each petal.

Step 23

For the flowers already ‘bloomed’ dust the petals using pink powder colour and a soft brush.

 

Step 24

Using green florist tape attach 2 petals to the stamens.

Step 25

Add the other 3 petals around and bind them one by one.

 

Step 26

For the ‘Blooming’ bud dust with pink powder colour and a small soft brush. Add a small green calyx onto the base of the bud.

Step 27

Tape one blossom with a bud and one leaf or more, using green tape

 

Step 28

Add the rest of the leaves and flowers

Step 29

I have made this branch of apple blossoms. Feel free to create your own arrangement.

 

PASTA SCULTURA

PASTA SCULTURA

PASTA SCULTURA – sugar paste designed sculpting 

 

 

PASTA SCULTURA DESCRIPTION

Saracino Pasta Scultura is a mixture of sugars and chocolate substitute. Its consistency is similar to modeling clay.

Soft and malleable, it is the best choice for artists who want to use a technique similar to the traditional clay processing technique.

Thanks to its characteristics, it is the perfect choice to create big and extraordinarily beautiful figures by gently adding layers of sculpture paste. The joints merges without leaving a trace.

Saracino Sculpting Paste is available in 1 kg buckets and has a beautiful ivory white color and can be colored with the powdered food colorants or garnished with pearlescent or golden dyes.

We recommend using our Sculpting paste with temperatures not above 27 °-28 ° and avoiding using it in environments with high humidity levels.

FAQ – PASTA SCULTURA

 

1. IS IT A NEW VERSION OF SARACINO PLASTIC CHOCOLATE? No. Saracino modeling chocolate contains chocolate. Pasta Scultura contains chocolate surrogates.

2. WHAT IS ITS MAIN USE? We create it to work specifically with the “addition” sculpture technique. Its consistency is like clay, you can add or remove as much as you want to the model, changing its shape according to your creative needs.

3. IS IT GLUTEN FREE? Yes it is, like all Saracino products.

4. DOES IT DRY QUICKLY? It dries less quickly than plastic chocolate and can be remodeled by heating or manipulating it. It really depends on the size of the model and the temperature of the laboratory.

5. DOES IT HARDEN? Yes it does when not handled. In the original packaging, the product is solid.

6. HOW CAN I START WORKING WITH PASTA SCULTURA? Once extracted from the bucket, if it is perceived as difficult to mix, it can be cut into small pieces and put in the microwave to soften it. We suggest a maximum time of 10 seconds, constantly checking the consistency of the paste.

7. CAN I MODIFY THE MODEL AFTER A FEW DAYS? Yes you can, by softening the paste gently.

8. IS IT EASY TO MODEL? Modeling is very easy, you can smooth the piece of pasta “added” to the creation with just one finger or with special tools. This is the reason why it is perfect to work on large modeling projects and on edible sculptures.

9. HOW CAN I MODEL SARACINO PASTA SCULTURA? You can work it with modeling tools or with your hands. If you prefer the second option, it is better to use thin plastic gloves because in this way it will not stick to the fingers.

10. DO I NEED TO TAKE ANY SPECIAL PRECAUTIONS BEFORE USING IT? It is better to wear a white coat to avoid “dark particles” on the paste and to wash your hands and to dry them perfectly.

11. IS PASTA SCILTRA AVAILABLE IN DIFFERENT COLORS? No it isn’t. It is available only in ivory white color.

12. IN WHAT TYPE OF PACKAGE IS IT AVAILABLE? Currently, it is available only in 1 kg buckets.

13. IS PASTA SCULTURA EDIBLE? IF SO, WHAT IS ITS TASTE? Yes it is. Our Pasta Scultura has a chocolate flavor.

14. HOW CAN I STORE THE PRODUCT AFTER OPENING THE PACKAGE? It should be kept in its original packaging with the lid closed.

15. WHAT IS THE MAXIMUM WORKING TEMPERATURE? We recommend you not using it with temperatures above 27 °/28°.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PASTA BOUQUET

PASTA BOUQUET

PASTA BOUQUET – sugar paste designed for making flowers

 

 

PASTA BOUQUET DESCRIPTION

Saracino Pasta Bouquet is a ready-to-use product. It must be rolled very thinly with the help of a rolling pin to make very realistic flowers. Our Pasta Bouquet is extremely elastic and does not crack, adapting perfectly to flower moulds while retaining all the veins. This is also given by an initial stiffening of the paste whilst the flowers are forming but does not dry out immediately, offering time to correct any imperfections or mistakes.  It has a light vanilla aroma and taste and can be easily coloured using gel or powder food colourants.

FAQ – PASTA BOUQUET

FAQ – PASTA BOUQUET

  1. IS IT A NEW VERSION OF SARACINO MODELLING PASTE?No, it isn’t. It is a brand-new product for creating flowers and foliage.
  2. WHAT IS ITS MAIN USE?It was created specifically for the production of flowers and other decorative elements that require great subtlety
  3. IS IT GLUTEN FREE?Yes, it is. Just like all Saracino products.
  4. DOES IT DRY QUICKLY?It dries less quickly than our Modelling Paste and this characteristic allows the composition of the flowers when the individual elements are not yet completely dry.
  5. DOES IT HARDEN?Yes, it does. Once stiffened, the flowers remain resistant and compact. In the original packaging, the product is slightly soft.
  6. HOW CAN I START WORKING WITH PASTA BOUQUET?You just need to roll it with the help of a rolling pin.
  7. CAN I MODIFY THE FLOWER AFTER A FEW DAYS?No, you cannot. Once the flowers dry, they can no longer be modified.
  8. IS IT EASY TO MODEL?Modelling is very simple and just as easy as placing the product in moulds to obtain petals and leaves.
  9. HOW CAN I MODEL SARACINO BOUQUET PASTE?You can easily work it with your hands and roll it with a rolling pin to thicknesses less than a millimetre.
  10. DO I NEED TO TAKE SPECIAL PRECAUTIONS BEFORE USING IT?We recommend washing your hands and drying them perfectly. If necessary, we recommend using a little corn flour on the hands and on the workspace to prevent the paste from sticking.
  11. DOES SARACINO PASTA BOUQUET COME IN DIFFERENT COLORS?At present, it is only available in white, but we are planning to expand our colour range as soon as possible.
  12. IN WHAT TYPE OF PACKAGE IS IT AVAILABLE?Currently it is available in 1kg buckets and in 250g packages.
  13. IS PASTA BOUQUET EDIBLE? IF SO, WHAT IS ITS TASTE?Yes, it is. It has a light vanilla aroma and taste.
  14. HOW CAN I STORE THE PRODUCT AFTER OPENING THE PACKAGE?For the buckets it should be kept in its original packaging with the lid closed. For the 250g paste, you should wrap the paste tightly in cling film to avoid contact with the air.
  15. WHAT IS THE MAXIMUM WORKING TEMPERATURE?We recommend you not using it with temperatures above 30 °