UNICORN PARTY CAKE

UNICORN PARTY CAKE

Skill level: INTERMEDIATEĀ 

You will need:

  • White Saracino pasta model

  • Saracino pink and gold powder colour

  • Saracino white gel colour
  • Cake or dummy circular about 20cm high

  • Circle cutter

  • Knife

  • Large cocktail stick

  • Clear alcohol

  • Pink, light blue and blue Saracino pasta model

  • Work base

  • Thin brush

  • Ball tool

  • Silicone brush

  • Modelling tools
  • Black and brown food marker pen

Step 1

Cover your cake with sugarpaste. For best results use Saracino Pasta Top.

Tip : Pasta Top is Vegan, Gluten free and has NO hydrogenated fats.Ā 

Step 2

Using a soft brush gently blend from the base upwards with the pink powder colour, be careful not to use too much colour and you can tap the brush onto a sheet of kitchen paper to remove excess. Do the same from the top of the cake downwards.

Step 3

Using your circle cutter cut out two circles. Using the same cutter cut out two crescent shapes.

Step 4

Using your fingers shape the crescent into an eyebrow.

Step 5

Repeat so we have two eyebrows.Ā 

Step 6

Mix your gold dust colour with the clear alcohol and paint both eyebrows. Fix where required on the side of the cake.

Step 7

Using your circle cutters cut out two large and two small circles. Use a sharp knife to cut the top of each circle into a triangle shape.

Step 8

Using the gold paint, colour the two smaller circles.

Step 9

Fix the smaller painted pieces into the larger shapes to form the ears.

Step 10

Now for the Unicorn horn. Roll out two thin cone shapes from your white modelling paste.Ā 

Step 11

Twist the two together to give the spiral effect.

Step 12

Roll it tightly and then insert a cocktail stick or skewer into the base to provide support.

Step 13

Using your gold colour paint the horn. Fix the horn and the ears to the top of the cake.Ā 

Step 14

For the flowers cut out circles of different colours.Ā 

Tip : You can choose any colour scheme to match your occasion.

Step 15

For each flower create a central bud by rolling paste into an egg shape. Then start applying the petals around each bud.

Step 16

Cut the larger petals in half to give the effect you need for each flower.

Step 17

Keep fixing the petals working around the buds.

Step 18

Tuck each petal inside the one previously applied and fix.

Step 19

Make as many roses as you want to give the look you need. Fix to the top of the cake to give the unicorns hair look. We will go onto the filler flowers next.Ā 

Step 20

For the filler flowers use your fingers to roll out cone shapes as shown.

Step 21

We cut the largest part of the cone in half and then half again in the other direction to give four petals.

Step 22

We spread the cut parts to form a four-petal flower. Use finger pressure or a ball tool to spread them and give form to make look realistic.

Step 23

Now dust your filler flowers using pink Saracino powder colour. Place the filler flowers among the roses to fill in any gaps.

Step 24

Use as many roses and filler flowers to give the effect you would like to see on your cake.Ā 

Step 25

For the babies head roll a ball and with your fingers press to create the eye sockets. Use a silicone tool to form the nose.

Step 26

We create the nostrils and shape the nose with the silicone tool.

Step 27

Use a ball tool to create the eyebrow arches.

Step 28

Use your ball tool to create the eye sockets. Then roll two small balls of modelling paste to create the eyes.

Step 29

Insert the balls inside the holes to create the eyes.

Step 30

Make two smaller circles of brown paste and fix to each each ball.

Step 31

Roll out some of your brown paste very thinly and attach a strip above each eye for the eyebrows.Ā 

Step 32

Use your Dresden tool or similar to form the lips. The use a small ball tool to create the sides of the mouth.

Step 33

Create the pupil with a black food marker.

Step 34

Blend the iris with the brown food marker.

Step 35

Use your small ball tool to shape the mouth into the expression you require. Using white Saracino gel colour apply tiny dots to each eye.Ā 

Step 36

Your modelled face should look similar to this.Ā 

Step 37

Roll out an oval shape of your white paste for the body.

Step 38

Using your fingers raise one end of the oval shape.Ā 

Step 39

Use your ball tool to press the neck and sockets for each leg.

Step 40

For the neck roll out a tube of your pink paste. Cut short and fix into the socket made for the neck.

Step 41

Use a cocktail stick to attach the head to the neck in the angle you would like. For the hair roll out yellow paste into thin strands. Start applying to the head to build up the hair style. Use your ball tool to form shoulder sockets. Roll two strands to create the unicorn horn for the little girls head. Twist them together.

Step 42

Press down the hair strands with your silicone tool.Ā 

Step 43

Form the arm with pink paste and create the palm of the hand with the thumb.

Step 44

Form the four fingers. Now repeat for the left arm and hand.

Step 45

Place the girl in front of the cake and attach her arm and the unicorn horn to her head.

Step 46

Roll a sausage shape of pink paste and cut diagonally in the centre for the legs.

Step 47

Use your fingers to roll out the foot and ankle from the thinner part of the paste.

Step 48

Roll gently on your mat to create the form of the leg and knee.

Step 49

Make four small cuts on the back of the foot to form five toes.

Step 50

Fix the legs and the arms to the little girl. Model them into the shape you would like.Ā 

Your model is now finished and ready to WOW your friends.Ā 

FONDANT TREE BARK TEXTURE

FONDANT TREE BARK TEXTURE

Skill level: BEGINNERS

You will need:

  • Saracino Pasta Top

  • Saracino Liquid airbrush food colour brown

  • Saracino Liquid airbrush food colour orange

  • Saracino Liquid airbrush food colour red

  • Saracino concentrated gel food colour green

  • Saracino concentrated gel food colour black

  • Aluminum foil

  • Rolling pin

  • Airbrush

  • Grated coconut

  • Steel spatula

  • Modelling tools

  • Set of round cutters

  • Small brush

  • Edible glue

  • Cake drum

  • Scissors

Step 1

Place the white Pasta Top on your work surface and roll the fondant out evenly.

TIP: Pasta Top is VEGAN friendly, GLUTEN FREE and has NO HYDROGENATED FATS.Ā 

Step 2

For the top of the tree place the fondant gently over the top of your cake (or dummy)

Step 3

Remove the excess paste with a knife around the edge of the cake.

Step 4

Save the removed paste for later.

Step 5

Use different sizes of round cutters to press into the paste on top of the cake. You can use a modelling tool also to create circles on top of the cake.

Step 6

Create strips with your modelling tool at two opposite sides of the cake, so it looks like the tree has been cut.

Step 7

To cover the side of your cake roll out a piece of fondant evenly into a rectangular shape. We are going to cover the side of the cake with Pasta Top. This can be done in panels if needed.

Step 8

Take a piece of aluminum foil and scrunch into a ball. Then un-fold so you create a textured pattern in the foil. Place the foil on top of your paste and use your rolling pin to roll the foil into the paste.

Step 9

Repeat step 8 to make sure the texture is all over your paste. Remove the foil and cut a rectangle. Take the height of your cake into account.

Step 10

Create long teardrop-shaped pieces of fondant to create tree roots. Create different lengths and thicknesses. Use a little edible glue and push the teardrop-shaped pieces against your cake at different places. Decide for yourself how many roots you are going to make.

Step 11

Take the rectangle fondant and place it against the side of your cake, use Saracino gel or water to stick the fondant to your cake.

Step 12

Use scissors to remove the excess fondant that rises above the edge of your cake. You don’t have to cut it neatly.

Step 13

Repeat steps 8 up to 11 for covering the side of the cake if you cannot achieve it in one piece.

Step 14

Where the side panels meet press them together to join. It does not have to be too neat as a real tree is never smooth and perfect

Step 15

You can work the seams of fondant with a piece of aluminum foil.

Step 16

Just press the foil onto the paste so you don’t see the seams anymore.

Step 17

Press the foil at the top of the cake so you won’t see the cuts you made removing the excess fondant at the top.

Step 18

Press gently from top to the bottom of the seam. Repeat this step for each seam of fondant

Step 19

If you want to give your bark more dept, push a piece of foil deeper into the fondant. Repeat this for your whole cake.

Step 20

Use a modelling tool to create a dent in your fondant tree.

Step 22

Repeat step 20 as many times as you like

Step 23

Get your airbursh ready to use.

Step 24

Always start with the lightest airbrush colour orange.

Step 25

Cover the whole cake with a light orange airbrush colour. Turn you cake while brushing. Use a turntable if you want to.

Step 26

The next airbrush colour is red. Airbrush the rifts and dents in the cake. Don’t airbrush the whole cake, just the dents, sides of the roots and some dents in the cake.

Step 27

The next airbursh colour is brown. Airbrush the whole cake with the brown airbrush colour. Make sure you airbrush some parts darker than other parts.

Step 28

Place a clean natural sponge in water. Squeeze the sponge well until there is no more water in the sponge (very important!)

Step 29

Run the sponge along the cake very gently, don’t press too much. Remove just a little airbrush colour

Step 30

Put some grated coconut on a dish and use little bit of the green gel colour. You can use a drop of water to spread the gel colour (it’s better to colour the grated coconut one day before you make your cake!) if you want a darker green, you can add a drop of black gel colour

Step 31

Use a brush and a little edible glue to fix the grated coconut to your cake, place anywhere you would like.

Step 32

Use a spatula to place the coconut on top of the glue.

 

Step 33

Your tree cake is ready. Decorate your tree cake anyway you want to! Have fun! I made some mushrooms for my cake.

SUMMER SPLASH TIME

SUMMER SPLASH TIME

Skill level: BEGINNERS

You will need:

  • Skin tone modelling paste
  • White modelling paste
  • Brown modelling paste
  • Orange modelling paste
  • Blue cover paste – Pasta Top
  • Green modelling paste
  • Brown colour gel
  • Extra white colour gel
  • Green colour gel
  • Pink colour powder
  • Blue colour powder
  • Dresden tool
  • Craft knife
  • Knife
  • Ball tools (different sizes)
  • BrushesĀ (different sizes)
  • 6inch cake board
  • Cocktail stick

Step 1

Roll a largeĀ  thick cylinder out of orange modelling paste (110gr)

Step 2

Glue 2 endsĀ  of the cylinder together to create floating ring

Step 3

Cover the cake board with 300g of blue covering paste and with a large ball tool create a circle in the middle the same diameter as the floating ring you just made.

Step 4

With your finger create semi circles (waves) around the main centre circle

Step 5

Place the floating ring in the middle of the board and roll some small, medium and large balls out of white modelling paste

Step 6

Press 3 sizes of ball tools into the ring (all the way around)

Step 7

With the help of a bit of water attach the balls into the indents

Step 8

Mix some brown and skin tone until you achieve the desired darker shade for the body

Step 9

Make a cone shape out of the darker skin tone paste for the body (45gr)

Step 10

Roll with your finger on the top of the cone to create a neck

Step 11

Press with 2 fingers on the side of the body to get the shoulders

Step 12

Pinch gently with your fingers the sides of the shoulders to give the shoulder sockets

Step 13

Make a ball shape out of the darker skin tone paste (50gr)

Step 14

Start to roll your finger gently in the middle of the ball to create a little dent between the nose and the forehead

Step 15

Indent the eye area with your fingers

Step 16

With any round tool rock gently side to side to start to create the nose

Step 17

Use the Dresden tool to shape the nose and cheeks

Step 18

Make a line with the sharp side of a Dresden tool to make the mouth

Step 19

Define the edges of the lips using the Dresden tool

Step 20

With the help of a Dresden tool make the dimples

Step 21

With the knife cut the excess of the paste from the bottom and the sides of the face

Step 22

Smooth the edges of the face with your fingers

Step 23

Using your Dresden tool shape the bottom and top lips. Create the eye sockets with the Dresden tool

Step 24

Prepare 2 identical teardrops out of white modelling paste and push them gently into the sockets

Step 25

Roll 2 same sized balls of the green modelling paste and 2 tiny ones out of black modelling paste

Step 26

Attach green balls on the eyes andĀ  black balls in the centre of the green

Step 27

Roll 2 thin cones out of black paste for the lashes and attach them on the top of the eyes.

Step 28

Outline the iris with a darker green shade of colour gel using a very fine brush

 

Step 29

Create 2 tiny triangles and add them into the eyes

Step 30

Roll 2 small cones of the black modelling paste to make eyebrows and fix in the required position

Step 31

Dust the lips with a pink colour powder with small brush

Step 32

Dust the cheeks with a pink colour powder using a large brush

Step 33

Add a fine eyelid crease to each eye using brown gel colour

Step 34

Attach a darker skin tone ball at the back of the head

Step 35

Roll a small rectangle out of yellow modelling paste to make a swimming costume. Use your Dresden tool to form a small dent in the base of the throat.

Step 36

Attach a rectangle all around the body

 

Step 37

Roll out two small cones from darker skin tone modelling paste (3.5g each). Cut them diagonally to form the basic shape of the arms

Step 38

Flatten the hand with your finger

 

Step 39

Cut a small triangle to form the thumb

Step 40

Bend the arms in the middle

 

Step 41

Place the body on the middle of the floating ring and insert a cocktail stick then place the head on top. Attach the arms

Step 42

For the straps roll 2 thin strips out of yellow paste and stick them on the swimming costume over the shoulders

 

Step 43

To make the hair on the head roll a circle out of black paste (6.5cm – 17g)

Step 44

Attach the circle at the back of the head

 

Step 45

Roll some small, medium and larger cones out of black paste and flat them to create the hair. Also make 2 small cones and 2 yellow balls (for elastic bands) for ponytails

Step 46

Attach all cones on the top of the head and ponytails on the sides. Make 2 small teardrops out of darker skin tone for the ears and attach them on the sides of the head

 

Step 47

Add some shades to the water with a dark blue colour powder using a large brush

Step 48

With white colour gel paint some fine lines on the water

 

Step 49

Your cake topper is ready

KAWAII ICE CUPCAKE TOPPERS

KAWAII ICE CUPCAKE TOPPERS

Author: SARAH BRAY

Skill level: BEGINNERS

You will need:

Step 1

Roll pale pink paste into a smooth ball in the palm of your hands. Use a smoother held at an angle to make a cone shape. Set aside for a few minutes to dry a bit.

Step 2

Using a sharp knife, cut a section off each end so that it measures approx. 5cm in length.

Step 3

Smooth and curve the narrow end using your fingers.

Step 4

Roll a cherry tomato sized piece of pale pink paste into a ball. Place on the board and use the palm of your hand to flatten the base into the board, using your fingers to push the edges down to create a dome shape. Leave to firm up.

Step 5

Add holes for eyes using a rounded end firm silicon shaper tool (or the end of your paintbrush)

Step 6

Mark a space for the mouth using the wider end of the Dresden tool.

Step 7

Use sugar glue to attach the two pieces together. At this point you can insert a cocktail stick for extra support if necessary, for extra support.

Step 8

To make the cream on the milkshake, roll a long snake of white modelling paste that tapers off at one end.

Step 9

Roll a thinner brown snake in the same way and gently press against the side of the white piece.

Step 10

Starting at the back of the glass wrap the white and brown piece around in a coil shape.

Step 11

Continue wrapping around until you reach the top.

Step 12

For the flake roll a small sausage shape of brown paste approx. 2cm in length and use a scribing tool to mark on lines.

Step 13

Remove a small diagonal section from one end and secure to the side using sugar glue if necessary. On the opposite side use the end of your paintbrush to make a dent (this is where the straw will go later)

Step 14

Roll a short sausage of pale green paste and cut to around 4cm.

Step 15

Bend the top section over and mark on two lines in a ā€˜v’ shape on the bend using a scribing tool. Leave to dry completely.

Step 16

To make the ice cream sandwich, roll out brown paste to approx. 5mm in thickness and cut two rectangles 6cmx4cm.

Step 17

Holding the narrow end of the dresden tool vertically, push into the sides of the paste to create a pattern. Set these aside to firm up.

Step 18

Roll pale brown, pale pink and white paste into pieces approx. 1.5cm thick

Tip: You can check they are all the same thickness by placing them next to each other and rolling them all at the same time

Step 19

Using a sharp knife, cut a strip of the white, pale brown, and pale pink paste so that they are roughly the same thickness and when pushed together are slightly shorter than the biscuits you made earlier.

Step 20

Using a rounded end firm silicon shaper tool (or the end of the paintbrush) mark a pattern of dots onto each biscuit.

Step 21

Assemble the ice cream cookie using sugar glue if necessary, to hold it together.

Step 22

To make the face on the side push the end of the paintbrush in for where the eyes will go and use the wide end of the Dresden tool to make the mouth.

Step 23

For the ice cream sundae bowl roll a ball of pale green paste in the palms of your hands and press it down onto the board rotating as you do so. In this way you will flatten what will become the top of the sundae dish.

Step 24

Use your fingers to press inwards on the top section whilst rotating the paste to shape into a sundae dish, smoothing of any rough edges as you go.

Step 25

Keep going until it resembles a sort of hat shape. Use a smoother to flatten off the top.

Step 26

For the ice cream roll a cherry tomato sized piece of paste in pale yellow, pale pink, pale brown and pale green paste.

Step 27

Roll a thin piece of each colour paste and wrap around each ball of ice cream. Use a Dresden tool to make indents.

Step 28

Put all balls of ice cream into the dish (I put the green one at the back just to support the others) and attach with sugar glue if necessary.

Step 29

Use the Dresden tool to make the mouths of the bottom two balls.

Step 30

Take a small piece of brown paste and gently using your index finger and thumb pull the paste out to make the sauce for the top of the ice cream.

Step 31

Stick sauce onto the top ball of ice cream.

Step 32

Brush a small amount of sugar glue on to the sauce and sprinkle a few 100s and 1000s on.

Step 33

Use a bit of sugar glue to secure the straw into the hole made earlier. If it is too long trim to size.

Step 34

For the eyes on the milkshake roll two small black balls and push into the holes. Add two tiny balls of white paste for highlights

Step 35

Roll another small piece of black paste for the mouth. Add on a tiny piece of darker pink paste for the tongue.

Step 36

Add the eyes and mouth for the ice cream sandwich as on the milkshake.

Step 37

Fill in the mouths of the ice cream with small pieces of black paste. Add tiny pieces of darker pink paste for tongue.

Step 38

Roll a small piece of black paste into a little ball and add as the mouth of the ball of ice cream on top, just pressing on with your finger to secure.

Step 39

When completely dry use an edible black pen to mark on the eyes on the bottom two balls of ice cream in little arrow shapes.

Step 40

Draw dots for eyes on the top ball of ice cream using black edible pen.

Step 41

Using a soft brush and edible pink dust give each face rosy cheeks.

Step 42

To finish paint white details on both the pink glass and the ice cream bowl using edible white dust mixed with clear alcohol.

Step 43

Your toppers are ready to be placed on the cake

BEACH BUNNY CARVED CAKE TUTORIAL

BEACH BUNNY CARVED CAKE TUTORIAL

Skill level: INTERMEDIATE

How to make a perfect ganache:

Place 750g Saracino chocodrops and 250ml whipping cream. Bring whipping cream to a boil. Pour on the chocolate drops and let stand for a minute. Stir well until all drops are dissolved. Pour into a sealable container and let stand for 24 hours. Heat the required amount in the microwave. Be careful not to make it too thin. Chocolate spread is the ideal consistency.Ā 

You will need:

For Stainless Steel armature construction

  • 8mm threaded rod 20cm long.
  • 5 x 8mm stainless steel washers
  • 5 x M8 stainless steel nuts
  • 2 x spanner size 13
  • MDF or Wooden Board 25 x 20cm
  • Cake boards diameter 15cm and 10cm and 3mm thick
  • 2 x cake diameter 15cm and height 10cm
  • Ganache 1kg
  • Sturdy filling as desired

For the Cake you will needĀ 

  • Pasta Top white 1400g
  • Model chocolate white 1050g
  • Pasta Model white 35g
  • Pasta Model red 250g
  • Pasta Model black 10g
  • Gel colours: yellow, blue and skin
  • Dust powder colours: white, black and blue
  • Airbrush colours white and black
  • Saracino Cakegel
  • Rice krispies 150g
  • Marshmallows 150g
  • Butter 30g
  • 2 x tea biscuit
  • Uncooked spaghetti
  • ModellingĀ tools Cerart
  • Precision knife
  • Rolling pin
  • Ball tool
  • Brushes
  • Pallet knife
  • Two wooden skewers
    • Ā 

Step 1

Take a 20 x 25 centimetre wooden board or MDF board. Ideally use a stainless steel baseplate in the middle of the board. This will alleviate the need to drill etc.Ā 

If you are unable to purchase a baseplate type fixing you can drill a 9mm hole in the middle of the board. Attach an 8mm stainless steel threaded rod. Make a recess on the bottom of the board so the nut is not proud of the underside of the board. Use stainless steel washers under the nuts. Tighten everything firmly.

Place a piece of felt at the bottom of the board at each corner.

Step 2

Using your 15cm cake board drill a 8mm hole in the centre.

Heat 150g of marshmallows and 30g of butter in the microwave or pan, add 150g of rice Krispies and make a dish shape 5cm high. Make a hole in the center through which the threaded rod will pass.

Now place a nut on the threaded rod at a height of 5cm.

Step 3

Slide the rice krispies down over the threaded rod. If necessary, trim the rice krispies around with a sharp knife. Now place a stainless steel washer on the nut and on top of the cake board. As we have a rice krispie base, the cake board does not need to be secured.

Step 4

Line the threaded rod with a small amount of modelling chocolate to about 10cm height.

Cut a hole of 1 cm diameter in the middle of each cake layer. Stack the cake layers over the threaded rod and put a nice filling of your choice between the layers.

TIP: Use a firm filling otherwise you may get settlement and bulges in your bunny. Swiss meringue buttercream, ganache, jam or normal buttercream are ideal.

Step 5

Take a cake board with a diameter of 10cm and make a 8mm hole in the middle. Place a stainless steel washer and then nut on the threaded rod from the top. Tighten well and coat the exposed portion of the threaded rod and nut with a small amount of modelling chocolate.

Step 6

Place the next cake layers over the board with your chosen filling. Chill the cake in the refrigerator for at least an hour. Cut the cake into the desired shape as shown.

Step 7

Using the carved leftovers raise the cake as shown. Then cover with ganache.

Step 8

Also cover the rice krispies with the ganache.

Step 9

Make sure to form the eye sockets and the snout into the desired shape. Put the cake into the refrigerator and let it stand for at least three hours to go firm ready for the next step.

Step 10

Take 750g of white Pasta Top and knead it until pliable and ready to work. Roll out thinly and cover the rabbit. Start at the front of the rabbit and finish at the back. Smooth seams neatly away with your cake smoothers or fingers.

TIP: Due to the great elasticity of the paste, you can stretch and blend the paste at the back until it closes so you see no joint.Ā All excess paste can easily be cut away with scissors.

Step 11

Use a ball tool to form the eyebrows. Use your Dresden tool to shape the lines of the snout. Using your ball tool shape the mouth.

Step 12

Smooth the eye sockets with the ball tool.

Step 13

Before we start dressing your rabbit it should look like this.

Step 14

Take 150g of red Pasta Model and roll out thinly. Cut a half oval at the top. This is the neck of the swimsuit. Cut out the shapes for the arms on the sides.

Step 15

Place the paste on the front of the rabbit to cover the whole of the front to make the swimsuit. Cut away excess paste at the base with a sharp knife.

Step 16

Now for the back cut out a rectangular piece of red Pasta Model about 16cm wide and 8cm high. Cut the top slightly into a curve.

Step 17

Attach to the back of the rabbit and cut away excess Paste.

Step 18

Cut two strips of red Pasta Model about 12cm long and 1.5cm wide.

Step 19

Attach the straps to the back of your bunny. Connect it to the swimsuit at the front.

TIP: You can use a little water to attach them if needed.Ā 

Step 20

Finish neatly with a knife.

Step 21

Now for the tongue. Take 7g of red Pasta Model and model a teardrop shape. Using your knife make a line on the center. Place the tongue in the mouth again using a little water if needed.Ā 

Step 22

For your polka dots roll out white Pasta Top thinly and cut out your desired amount of round shapes of 1cm diameter.

Step 23

Place the white circles randomly on the bathing suit.

Step 24

For the board covering. Colour 100g white Pasta Top with blue gel colour, colour 90g white Pasta Top with yellow gel colour and take 60g white Pasta Top.

Step 25

Roll the blue and white into sausage shapes. Lay side by side.

Step 26

Twist the white and blue strands together to create a marble effect. Don’t twist too much! A few twists is sufficient.

TIP: If you twist too much you will lose the marble effect you are looking for.

Step 27

Roll out your marble paste and yellow paste into rectangular shapes. The marble needs to be big enough to cover your board. Cut out circles from the side so they can wrap around your bunny.

Step 28

Cover the board with the blue paste applying a little water to the board first to help it stick.Then fix the yellow paste. Make sure it fits well around the base of the rabbit. Finish neatly by blending and smoothing the paste so you see no joints.

Step 29

For the rabbit’s legs. Take two pieces of 150g of modelling chocolate. Form two flat oval shapes. Cover each leg with 20g thinly rolled white Pasta Top.

Step 30

Attach to the sides of the rabbit and press down firmly. Now using white Pasta Model fill the eye sockets. Using your Dresden tool form lines around the eyes to give character.

Step 31

For the feet take two 150g pieces of white modelling chocolate. Make two blunted triangles and cover each foot with 30g of thinly rolled white Pasta Top.

Step 32

For the toes of one foot. Use 40g of Pasta Top and divide it into two pieces of 12g (smaller toes) and one of 16g (big toe). Make round balls and press a little flat. Insert a piece of uncooked spaghetti into each toe. Repeat this step for the toes on the other foot.

 

Step 33

Colour 20g of your white Pasta Top with skin gel colour. Cut in two halves. You will need 1.5g for each toe and 5.5g for each sole. Roll out thinly and attach to the toes and foot using water or cake gel.

Step 34

Attach the feet to the rabbit’s legs using a little cake gel. Using your Dresden tool form some detail as required.

Step 35

For the arms take 300g of white modelling chocolate and divide into two equal pieces of 150g. Roll each into sausage shape approximately 16cm long. Press down to make slightly flat and then using your fingers roll the wrist shape.

Step 36

Cover each arm with 40g of white Pasta Top. For the thumbs take 5g each and roll to a thumb shape with your fingers. Attach to the hand using cake gel or water.Ā 

TIP: Remember there is a left and right hand when fixing the thumbs.

Step 37

Shape the hands with finger pressure. Using your Dresden tool form the finger lines. Use a sharp knife to cut the top of the arms diagonally for attaching to the shoulder. Be careful with your cutting as it effects how the arms look on your bunny. Attach them as required using cake gel or water.

Step 38

For the teeth take 5g white Pasta Model and cut into a small rectangle. Cut both sides diagonally to form a point. Make a line in the middle with a knife. Fix the teeth in the mouth.Ā 

Step 39

Roll 3g Pasta Top into a small sausage and attach to the top of the eye. Repeat for the other eye.

Take 5g black Pasta Model and using your fingers form a triangular nose. Fix with a little cake gel.

Step 40

For the hair on the chest take 20g white Pasta Top. Roll elongated strands and press down on one side. Attach under the chin with cake gel and using your Dresden tool shape and give texture.

Step 41

Roll out thinly black Pasta Model. Using a sharp knife cut out the eye brows and eye lashes. Fix to the face using a little cake gel. Ā 

Step 42

Now for te eyes use two small balls of blue Pasta Top. Mix your black powder colour with the clear alcohol. Paint a black pupil using a small paint brush. Now mix your blue powder with clear alcohol and paint the remainder of the eyes.Ā 

Step 43

Fix them to the eye balls in the position required. Add detail and highlights using white powder and a fine brush.

TIP: How you position the eyes effects how the rabbit’s mood is! Happy, serious, confused, moody, crazy! You choose.

Step 44

For the ears, take two pieces of 70g white modelling chocolate. Roll two sausage shapes of approximately 10 cm long and press flat. Colour 5g Pasta Top with skin gel colour for the inside of the ears. Insert a wooden skewer into each ear.

Step 45

Place the pink insert on the ear. Smooth the edges of the ear insert using a ball tool. Add detail and texture using a Dresden tool or Cerart silicone modelling tool.Ā 

Step 46

For the bow. Take 70g of Red Pasta Model and roll thinly to a rectangle shape of approximately 16cm x 4cm. Fold the ends into the middle and pinch to form the ruffled effect at the centre. Use a little cake gel to fix in place as required. Now roll a rectangle 5cm x 2cm and wrap around the centre of the bow. Cut out some small white dots and decorate as you wish.

Step 47

Insert the ears to the head and attach the bow directly in front of it. Use a little cake gel if required.Ā 

Step 48

To give shade and character you can use an airbrush or dust lightly with Saracino dust colours.Ā 

TIP: If using an airbrush mix Saracino white and black to give a grey colour. If dusting use a soft fine brush. Remember to be subtle with your colouring.Ā 

Step 48

For the sand, crumble two tea biscuits and sprinkle them around the base of the rabbit. Finish the board with a matching ribbon.