HAPPY FROG TUTORIAL

HAPPY FROG TUTORIAL

Skill level: BEGINNERS

You will need:

  • Saracino model paste white and a little black
  • Saracino gel colors blue, green, pink, purple, white
  • Dust pink and green
  • Edible glue
  • Black pearls
  • Rolling pin
  • Glue brush 
  • Dusting brush
  • Modelling tools
  • Knife
  • Cake board

Step 1

Prepare the Saracino Modelling Paste required for the frog. Mix the modelling paste with the green gel colour. Using your fingers form a pear shape. Make the top of the pear flat to put the head on later.

Step 2

Make two long sausages of the green paste and leave the middle a bit thicker.

Step 3

Bend the sausages in the middle.

Step 4

Use your fingers to make a knee. Push your fingers towards each other with paste inbetween. Make a pointy knee.

Step 5

Push the paste flat at the other end.

Step 6

Prepare the Saracino Modelling Paste required for the belly. Mix white model paste together with the pink gel colour. Roll thinly.

Step 7

First cut a circle with a round cutter that fits the front of the frog’s belly. Then cut a pear shape out of the circle.

Step 8

Glue the legs under the body of the frog.

Step 9

We are going to make the front legs. Make a long sausage of the green paste and leave the middle a bit thicker, and cut the sausage in the middle. The length of the leg has to be the same length of the frog’s body.

Step 10

Make the toes with your sharp blade then form using your modelling tool.

Step 11

Cut off the front of the toes and make them slightly flat.

Step 12

Make little peas out of the green model paste.

Step 13

Attach the pink belly onto the body of the frog

Step 14

Glue the legs of the frog against the body and using your modelling tool form lines for the elbow joint.

Step 15

Glue the green peas on the front of the toes.

Step 16

We are going to make the back feet. Make three small balls (slightly larger than the peas)

Step 17

Roll out to make a long toe shape with the end a round ball. Glue three of the toes together to form the foot.

Step 18

Flatten the end as shown on the picture.

Step 19

Glue the feet under the back legs.

For the head roll a green ball. For the mouth area roll a little sausage that fits the face. Leave thicker in the middle so we can form the mouth.

Step 20

Attach the rolled paste to the bottom half of the face. Use the modelling tool to blend the joints to the face. Make a rotatory movement with the colour shaper to do so.

Step 21

Use the modelling tool to make a little hole for the mouth ends.

Step 22

Use your Dresden tool to create the lips and mouth

Step 23

Use a ball tool to form the eye sockets, make the eye socket larger by moving the ball tool up and down. This will also create an upper eyelid when doing this.

Step 24

Roll two little sausage shapes to place above the eyelid. The sausages are to be smaller at both ends.

Step 25

Fix them above each eye socket. 

Step 26

Roll two small balls of white paste and press into the eye socket to form the eyes. Roll out two small black sausage shapes to form the eye lids.

Step 27

For the pupil colour the Saracino Modelling Paste with blue gel colour. For the iris use a little black modelling paste. Flatten them with your finger.

Step 28

Put a little dot of white gel colour onto the black. Make sure you put the dots at the same spot in the eyes.

Step 29

Colour your white modelling paste with green and blue gel colours ready for the dots on the frog. Make sure your green is darker than the frogs body.

Step 30

Using small balls of the coloured paste, flatten them and glue them to the frogs body randomly. Blend them into the body using your fingers.

Step 31

Use pink dust to give more expression to the frog. Highlight the end of the mouth and between the toes.

Step 32

Use green dust for the legs and the upper eyelid and above his mouth. Give more expression to the face.

 

Step 33

Prepare the Saracino Modelling Paste with pink, purple and blue gel color required for the snail and worm.

Step 34

For the worm make 5 little blue balls in 5 different sizes. The biggest ball will be used for the head.

Step 35

Use the back of a brush to create more depth in the face. Smoothen the lines with your finger.

Step 36

Form two holes for the eyes and insert two black pearls. Make the nose with a small ball of pink paste. Fix the worm onto the frogs head as shown.

Step 37

Now for the snail. Using pink paste form a ball and a sausage shape. Use a modelling tool to make lines in the pink sausage. This will be the snails body. Form a curve to the body. Make another sausage shape (this will need to be thinner to the end). We will coil this up for the snails shell.

Step 38

The three pieces of your snail are to look like the picture.

Step 39

Fix the head and the shell to the body. Form two eye sockets and a mouth in the face. Insert two black pearls for the eyes.

Step 40

Form a small ball for the nose and attach to the face. Make two small purple teardrop shapes for the antenna and fix them on top of the snail’s head.

Step 41

Dust the cheeks of the worm and snail with pink powder colour. And you are finished!

Cute Christmas Penguin’s

Cute Christmas Penguin’s

Skill level: BEGINNERS

TIPS:

Tip 1: You can make a snow man and his family using the same tutorial with a few little tweaks like instead of flippers and feet add some twigs made with wires and modelling chocolate

Tip 2: If you have some left over white Saracino that wasn’t used for a while and is a bit hard then how about crushing it in food processor and using it as snow?

You will need:
  • Saracino Fuschia sugar paste mixed with white to form light pink
  • Saracino Azure modelling paste
  • Saracino Light Blue modelling paste
  • Saracino Green modelling paste
  • Saracino Yellow modelling paste
  • Saracino Red modelling paste
  • Saracino Black modelling paste
  • Saracino White modelling paste
  • Rolling pin
  • Cutting wheel
  • Heart shape cutter
  • Dresden tool
  • Scallop tool
  • Shell tool 
  • Knit impression mat

Step 1

Roll pink Saracino modelling paste into a round ball, roughly 2 inches in diameter.

Step 2

Roll a small amount of white modelling paste into a thin sheet

Step 3

Using a metal heart shape cutter cut a heart shape on the bottom of the sheet to have a flat base instead of a pointy one

Step 4

Now give a deeper “V” cut to the heart using the cutter as shown in the picture

Step 5

It should look like the photo above

Step 6

Place this heart on the pink ball

Step 7

Gently roll and blend the edges of the heart well with the pink ball

Step 8

Using a ball tool mark the position of the eyes

Step 9

Make a lovely smile with the PME scallop tool

Step 10

Add tiny black eye balls made with Saracino black modelling paste

Step 11

To make lashes roll a very small amount of black modelling paste and taper it from one end

Step 12

Gently place two lashes on each eye using the pointy end of the dresden tool

Step 13

Add some blush on the cheeks using Saracino pink dust

Step 14

For the beak roll a tiny ball of orange modelling paste

Step 15

Flatten it and pinch from one end to form a beak and then glue it in position like shown in the picture

Step 16

Gently blend it onto the head

Step 17

For the body roll an oval shape ball out of pink modelling paste

Step 18

Roll out some white sugar paste and cut a small circle (roughly 4cm in diameter)

Step 19

Place it on the upper part of the body (oval shape)

Step 20

Blend it well by gently rolling

Step 21

Secure the head onto the body, use a tooth pick if required and some edible glue

Step 22

For the flippers, roll a small pink ball

Step 23

Taper this ball to form a drop shape and flatten

Step 24

Glue the flippers in position as in the picture

Step 25

Position the flippers at this stage before they dry

Step 26

To make penguins feet, take a small bit of orange modelling paste and form a drop shape

Step 27

Flatten the drop shape

Step 28

Using the pointy end of Dresden tool mark the toes on the feet

Step 29

Glue the body onto the feet

Step 30

Repeat the same for the male penguin. Use a slightly darker colour if you would like them to look different.

Step 31

Make tiny eyebrows for both the penguins using black modelling paste

Step 32

Fix the head of the male penguin and glue both of them together in a cuddling position

Step 33

For the scarf – roll light blue modelling paste and use the knit impression mat to get the knitted texture

Step 34

With a cutting wheel cut a long strip

Step 35

At both the ends of the strip make some fringe

Step 36

Wrap the scarf around both the penguins neck

Step 37

With a dresden tool hold it in the centre and gently press

Step 38

To make the hat for our girl penguin roll some yellow modelling paste and texture with the knit mat and start cutting

Step 39

Cut a triangular shape out of it

Step 40

Make a cone and seal the ends using edible glue

Step 41

Roll some white modelling paste with a rolling pin and cut a thin strip for the rim of the hat

Step 42

Texture with the shell tool

Step 43

Glue the rim on the base of the hat

Step 44

Make a tiny pom pom ball out of white modelling paste and glue on top of the hat

Step 45

Glue the hat on the female penguin

Step 46

To make the hat for our male penguin cut a small light green disk

Step 47

Roll a small ball in light green and glue on top of this disk

Step 48

Glue the hat on the male penguin

Step 49

Roll a small thin black string for the string lights

Step 50

Make tiny bulbs as shown in the picture in different colours of sugar paste

Step 51

Glue the bulbs onto the string

Step 52

Let the bulbs dry for some time on the string before you lift them

Step 53

Glue one end of the string on the female penguins hand and the other on the male penguins hand

Step 54

Your cute penguin couple is now ready to chill out on your cake

LITTLE FOX TUTORIAL

LITTLE FOX TUTORIAL

Skill level: BEGINNERS

You will need:

  • Saracino Model Paste white
  • Saracino Pasta Scultura
  • Saracino powder colors Brown, Yellow, Orange, White and Black
  • Saracino Liquid Shiny
  • Ball tool
  • Dresden tool
  • Modelling tool
  • Paintbrush
  • Exacto knife
  • Clear alcohol
  • Cocktail sticks or spaghetti

Step 1

Take a ball of Pasta Scultura  and form into the shape of the body

Step 2

Make a hair texture to the body with the Dresden tool. Work from the neck down to the bottom

Step 3

Roll a piece of Pasta Scultura into a length of 4 cm

Step 4

With your finger form a narrower section to the front leg.

Step 5

Make two notches on the foot with the Dresden tool.

Step 6

Using the Dresden tool form the hair texture on the leg.

Step 7

Attach the legs to the body

Step 8

Form a hind leg from a ball of Pasta Scultura

Step 9

Shape the hind leg with the finger and make a heel

Step 10

Make the notches for the toes with the dresden tool

Step 11

Use your Dresden tool to form a fur texture to the rear legs.

Step 12

Attach the hind legs to the body

Step 13

Form a roll of Pasta Scultura 5cm long and 1.5cm thick. This is for the tail.

Step 14

Model the roll into an elongated drop

Step 15

Apply fur texture to the tail using your Dresden tool.

Step 16

Attach the tail to the body

Step 17

Shape a ball of Pasta Scultura for the head.

Step 18

Using your finger press the ball slightly flatter on both sides and form a small snout.

Step 19

Using your ball tool form two holes for the eyes.

Step 20

Shape the mouth with the Dresden tool

Step 21

Make the nostrils with the tip of the dresden tool

Step 22

Make a border around the nose

Step 23

Using Pasta Model make two small balls of about 8mm diameter. These are for the eyes

Step 24

Fix the eyes into the eye sockets and apply fur texture to the face.

Step 25

Attach the head to the body

Step 26

Cut a ball of pasta scultura in half for the ears

Step 27

Form two triangles for the ears.

Step 28

Shape a rim to the ear and form fur structure to the ear with the Dresden tool. Attach the ears to the head.

Step 29

Mix yellow Saracino powder with alcohol and paint the eye very light yellow. Mix brown saracino powder with alcohol and make a brown edge around the eyes. Finally make the pupil with black Saracino powder

Step 30

Mix orange and brown Saracino powder with alcohol and paint the body. Avoid the belly, ends of the legs and the chin.

Step 31

Mix brown and black Saracino powder with alcohol and paint the ends of the legs dark brown

Step 32

Mix white Saracino powder with alcohol and paint the belly and the end of the tail white.

Tip: Let the edges of the colors merge slightly

 

Step 33

Using a small piece of Pasta Model place a white dot on both eyes

Step 34

Finish the eyes and nose with Saracino Liquid Shiny to give a glazed effect.

Tip: For extra strength in the attachment of the head, legs and tail, you can use cocktail sticks or spaghetti.

BABY PUMPKIN BOY

BABY PUMPKIN BOY

Skill level: BEGINNERS

You will need:

  • Saracino Modelling Paste – 200g orange, 60g brown, 40g skin color, 10g green,
  • 150g green Sugarpaste
  • Saracino Dust Colours – pink, skin, yellow, red, brown, green, black and white
  • Saracino Cake Gel
  • Cake Board 12cmx12cm
  • Styrofoam Ball 8cm
  • Modelling Tools and brushes
  • Knife
  • Scissors
  • Lemon extract/alcohol

Step 1

Cover the cake board with green sugar paste. Roll out the paste to a reasonable thickness.

Step 2

Use a stiff-bristled brush to make texture on the fondant. Trim the excess.

Step 3

You can use a 8cm stryrofoam ball to form the inside of the pumpkin or alternatively use a ball of rice krispie treat. Cut the top off two opposite sides of the ball with a sharp kitchen knife.

Tip: I will always use a styrofoam shape for inside support when I make a cake topper that is going to be kept as decoration for a long time. I use rice krispie treat only on cake decoration that is going to be eaten fast, so there will be no chance to deteriorate.

Step 4

Knead 200g orange Saracino modelling paste until soft and pliable and roll out to approximately 5mm thick. Apply cake gel or edible glue to the styrofoam ball and cover it with the modelling paste.

Step 5

Use your fingers to sharpen the upper edge.

Tip: I often use gloves when working on larger pieces, to be more hygienic. It also helps you when you have a hot hands and the paste may stick to them. When working on small faces or detail I prefer working without gloves to have more control and better feeling of my fingers.

Step 6

Use a modelling tool such as a CelPin to make the pumpkin’s grooves. Smooth them by running your fingers over them.

Step 7

For the pumpkin lid take 20g of orange Saracino modelling paste and shape it to a disk as big as the pumpkin top.

Step 8

Place the lid on the top of the pumpkin and mark where the grooves should be to match the main pumpkin. Remove the lid and form the dents as described in Step 6.

Step 9

Mix green and brown modelling paste and shape 3g of it to a twisted stem. Use a modelling tool and draw a line along the stem and place it in the middle of the lid. Fix using edible glue.

Step 10

Mix Saracino dust colours with lemon extract or vodka and paint the pumpkin. Start with yellow and using a wide brush paint in strokes from the upper edge to the bottom. Mix some red to the yellow dust to achieve a different shade of orange. Apply with a smaller brush. Paint the red and brown mixture to the dents. Use brown and green to paint the stem.

Step 11

Place the pumpkin and the lid in the middle of the cake board. Use brown, green and yellow dust colours mixed with lemon extract to paint the grass.

Step 12

Knead 50g of the Saracino sugar paste and place about 30g of it on the top of the pumpkin. Shape it to look like a fur blanket. Use small pointed scissors to add texture to the blanket.

Step 13

Knead 15g of the skin coloured Saracino Modelling Paste and roll to a sausage shape. Pull centrally on the upper side to form a small neck. Mark the arm pit on the left side.

Step 14

Pull and shape the right side to form a long thin sausage for the right arm. Mark in the middle for the elbow and bend it towards the direction of the body.

Step 15

Place the body into the pumpkin and arrange the fur strands in a way that they cover the joint between the body and the blanket and to look like the baby boy is inside the pumpkin. If needed use more brown paste to add blanket behind the body and shape it like fur as described in Step 12.

Step 16

Use 1.5g of the skin coloured Saracino Modelling Paste to make the hand. Shape it like a teardrop, flatten the thicker side with your finger and place on the modelling board.

Step 17

Using a knife cut out a small triangle to separate the thumb from the fingers and then make three cuts to form four fingers.

Step 18

Roll each finger gently between your finger and thumb to shape them and cut to the required length.

Step 19

Place the hand near the body in the pumpkin and arrange the fur around to look natural.

 

Step 20

For the head knead 20g of Saracino skin coloured modelling paste and roll it to a smooth egg shape. Use the round side of the CelPin and form two dents for the eye area in the middle of the head. Leave a gap of 2mm between the dents for the bridge of the nose.

Step 21

Using a modelling tool shape the bridge of the nose, with the lower end wider than the upper.

 

Step 22

Make the holes for the nostrils using a pointed modelling tool or tooth pick. Shape the nostrils.

Step 23

Draw a line for the mouth approximately 4mm below the nose.

 

Step 24

Using a knife cut the line deeper and then lift the upper lip from the inside

Step 25

Shape the upper and lower lip using a Dresden tool or silicon brush.

 

Step 26

With a small ball tool indent the line between the nose and the mouth.

Step 27

Shape the chin and the face using a CelPin and your fingers.

 

Step 28

Add two small flat teardrops into the eye sockets. Apply water on the edges and using a modelling tool smooth over to join them with the face.

Step 29

Add two larger flat teardrops for ears on both sides of the head.

 

Step 30

Place the head on the neck and using a small amount of water and the same technique as above join the two pieces together and blend the joint.

Tip: I only use water to join and smooth two pieces of Saracino modelling paste together. You generally don’t need sugar glue or piping gel for that. Apply the small amount of water and smooth the joint with your tool.

Step 31

Use a modelling tool to shape the direction of the eyebrows so it looks like the baby is sleeping peacefully.

 

Step 32

Shape a hat from 3g brown-green paste and fix it on the head. Use dust colors to brush and give more depth and realistic look. For this project I used Saracino pink, brown, skin and green dusts.

Step 33

Use a small brush to apply brown dust on the eyelashes and eyebrows.

 

Step 34

With a wider brush apply brown dust to the hair and pink for the cheeks. You can add skin and pink color on the body. Dust the hat with green and brown. Dust the fur with brown dust color and go over it with an almost dry brush dipped in the mixture of white dust and lemon extract / vodka.

OUT OF THIS WORLD PLANET CAKE

OUT OF THIS WORLD PLANET CAKE

Author: Mabanuby

Skill level: BEGINNERS

You will need:

For the cake:

  • Saracino white Pasta Top

  • Saracino blue gel colour

  • Dummy cake (circular) about 20 cm high. Or cake with same dimensions.

  • Saracino airbrush colours: black, light blue, blue

  • Saracino gold powder colour

  • Saracino powder spray dispensers: gold and silver

  • pure clear alcohol

  • Side smoother

  • Work base

  • Stiff bristled brush

  • Airbrush

For chocolate planets:

  • Polycarbonate half circle moulds of various sizes
  • Cocoa butter
  • Saracino powder colours: gold, white, bronze, blue and copper
  • Brush with stiff bristles
  • Brush with soft flat bristles
  • Dark chocolate
  • Marble or steel worktop
  • Spatulas
  • Baking tin

Step 1

Prepare blue pasta top: Add a little Saracino blue gel colour to the Saracino Pasta Top, until an intense blue colour is obtained.

Step 2

Roll out the dough into a strip as high as the dummy / cake.

Step 3

Cover the side of the cake bringing the excess upwards

Step 4

Cut the excess and finish with the smoother.

Step 5

Roll out some more of the blue paste and cut out a circle of the exact size of the cake and close the top by blending the paste very well with the smoother.

Step 6

Prepare the airbrush colours (black, dark blue and light blue). Since these are alcohol-based colours, the high concentration of pigment is deposited on the bottom, so before use it is advisable to shake / mix well.

Step 7

With the airbrush create horizontal shades on the whole cake alternating the different colours, starting from the lightest to finish with black.

Step 8

With Gold Pearl dust diluted in pure alcohol use a brush with stiff bristles to ‘flick’ the paint onto the cake, create splashes and stains on the surface.

Step 9

With a thin tipped soft bristled brush, use the Gold colour diluted in alcohol to sketch out some irregular lines, trying to follow both the style of the colour given by the airbrush and the splashes of gold.

Step 10

Prepare the colors to be used in the polycarbonate half circle moulds (use different sizes). Melt cocoa butter, separate it into 5 different bowls, in each of them mix the following colours: White Powder, Bronze Pearl Powder, Gold Pearl Powder, Blue Powder, Copper Pearl Powder.

Step 11

With the white coloured cocoa butter use a stiff bristle brush to create splashes directly on the polycarbonate moulds. Allow to cool for a few minutes in the refrigerator.

Step 12

With the gold and bronze coloured cocoa butter use a soft flat bristle brush to completely cover some of the moulds alternating the two colours as desired, while in other moulds create streaks. Leave to cool for a few minutes in the refrigerator

Step 13

With the Blue and Copper coloured cocoa butter, use small brushstrokes to alternate the different colours to create different shades and streaks, also covering over the white droplets or over streaks of other colours created previously. Allow to cool for a few minutes in the refrigerator. There are no rules, you can play with different colours and patterns to create new and different effects.

Step 14

Prepare the dark chocolate bringing it to a temperature of 45 degrees. Proceed with the tempering of the chocolate. Pour two-thirds of the chocolate onto the marble surface. This operation can also be done on a steel surface.

Step 15

With the spatula spread the chocolate on the marble surface, and then gather again. If you want to protect the marble top, you can place an acetate sheet on the marble or wet steel surface and proceed with the tempering on the acetate sheet.

Step 16

Repeat the operation several times until the chocolate reaches 27 degrees. The movement with the spatulas is important to obtain an excellent tempering of the chocolate.

Step 17

Collect the chocolate from the work surface and return it to the bowl with the remaining chocolate, allow it to reach 29 degrees.

Step 18

Pour the tempered chocolate into the previously painted moulds.

Step 19

Tip out the excess, checking that the chocolate completely covers the half circle mould.

Step 20

Clean the mould top very well with a spatula in order to have perfect edges to each of the half circles and leave to cool in the refrigerator for a few minutes. If the correct tempering temperatures have been achieved, the chocolate will become shiny with a smooth finish as it cools down.

Step 21

When set you can remove the half circles from the moulds. To make removal easier, you can tap the back of the mould with your spatula.

Step 22

Prepare different sizes with different shades of colours.

Step 23

Using a baking tray sitting over a hot pan of boiling water, lightly touch the edge of the chocolate to the surface to melt the edge of two half balls of the same size and with similar colouring.

Step 24

Join the two halves together to create balls. Allow them to cool by placing them in the polycarbonate moulds.

Step 25

Using your hot baking tray lightly melt a part of the ball (this is getting it ready to stick to the cake).

Step 26

Stick the balls to the top of the cake, allowing the chocolate to cool and set well.

Step 27

Again using the hot baking tray lightly melt the edge of some half circles.

Step 28

Fix the half circles to the top of the cake allowing the chocolate to cool well.

Step 29

Proceed by attaching some full balls and half balls on to the sides of the cake until you have the pattern and effect you want.

Step 30

To add extra effect spray the cake with Saracino edible glitter dust. Use silver and gold.

Step 31

Finish with the addition of some silver and golden dragees (sugar balls) as you like.