PANSY FLOWER TUTORIAL

PANSY FLOWER TUTORIAL

Author: Nicky Lamprinou

Skill level: BEGINNERS

You will need:

  • Flower paste Saracino – Pasta Bouquet
  • Non stick board
  • Small rolling pin
  • Balling tool
  • Foam pad
  • Cel board
  • Corn flour for dusting
  • Saracino Green gel colour
  • Saracino colour dusts – pink , violet , orange, yellow
  • Petal cutter (3 sizes) and veiner
  • Leaf cutter and veiner
  • Florist wire white (#28)
  • Florist wire Green (#26)
  • Florist tape green
  • Saracino edible glue
  • Wire cutter
  • Small scissors
  • Paint brushes
  • Kitchen paper

Step 1

To make the centre of the flower add a bit of orange and yellow powder colour to the paste and mix well.

Step 2

Form a small teardrop of sugar paste for each flower. Add some glue at the end of the wire (gauge 26).

Step 3

Insert the wire half way into the teardrop.

Step 4

Use a small scissors to cut the teardrop in three parts.

Step 5

Roll out a small amount of white or light pink sugar paste over the groove on the board.

Step 6

Dust your board with a small amount of cornflour and cut out 5 petals for each flower (2 small, 2 medium, 1 large).

Step 7

Add some glue at the end of the wire. Insert the wire into the ridge formed in the petal.(​White #28)

Step 8

Move the petal onto a foam pad and thin the edges of the petal with a balling tool.

Step 9

Dust the veiner with small amount of cornflour and press the veiner firmly to form a veining pattern.

Step 10

Let them dry and form.

Step 11

Add green colour to the paste, mix well and roll out.

Step 12

Roll out a small amount of the green sugar paste on the board.

Step 13

Cut out leaves with leave cutter.

Step 14

Add some glue at the end of the wire. I​nsert the wire into the leaf.(​Green # 26)

Step 15

Move the leaf onto a foam pad and thin the edges with a balling tool.

Step 16

Move onto veiner and press firmly.

Step 17

To paint the petals mix pink and violet powder colour.

Step 18

Use a soft brush to colour the big petals.

Step 19

Dust the edges of the small and medium petals.

 

Step 20

Use a small brush to colour in black the base of the 2 small and 1 big petal.

Step 21

The petals should look like this.

 

Step 22

Using florist green tape bind the small petal with the centre of the flower.

Step 23

Add another small petal.

 

Step 24

Add 1 medium petal behind the small petals.

Step 25

Add the second medium petal and the big petal into the centre.

 

Step 26

Wrap the leaf wires with green florist tape. You can also dust the leaves with Saracino green powder colour or you can use confectioner glaze to shine the leaves

Step 27

Attach first leaf to the flower stem.

 

Step 28

Add the rest of the leaves and flowers

Step 29

I have wired 3 pansy flowers with 5 leaves. Feel free to create your own composition which can differ in the form and the colours.

 

BABY SHOWER CAKE

BABY SHOWER CAKE

Author: Carmen Montero

Skill level: BEGINNERS

You will need:

  • A cake covered with buttercream on a cake drum
  • 3 pastry bags with buttercream white, pink and light green
  • 2 russian piping nozzles and one piping nozzle to make leaves
  • Saracino white modelling paste
  • Small Rolling pin
  • Baby shoe cutter set
  • Brush
  • Edible glue
  • Saracino brown colouring powder
  • Small scissors
  • Saracino pink colouring powder
  • 2 black sugar pearls
  • Dresden tool
  • Gold edible paint

Step 1

Take one piping bag with a russian piping nozzle and pipe some buttercream flowers to the side of the cake. Your buttercream will need to be a firm mix.

Step 2

Cover your cake up to the middle and pipe more flowers on just one area. You can pipe using two colours of buttercream; to do this take a piping bag, put the white buttercream on the walls of the bag and then, the pink buttercream in the center.

Step 3

Take the buttercream piping bag with the leaf nozzle and make some leaves around the cake between the flowers.

Step 4

To make the baby booties, we are going to use the Saracino white modelling paste. Knead a piece of paste to make it workable.

Step 5

Roll out the paste with a rolling pin thin enough to cut the pieces.

Tip: If required use cornstarch on the table to avoid the paste sticking.

Step 6

Cut out the baby bootie pieces. We are making two booties so you will need to cut out two of each piece.

Step 7

Allow to dry for a few minutes; that way we will get better shape when forming the booties

Step 8

Using edible glue apply to the front area.

Step 9

Fix the front piece of the bootie, form a curve in the piece to create the shape of the front of the bootie.

Tip: If required you can fill with tissue or sponge to keep the shape.

Step 10

Set aside to dry for a few minutes.

Step 11

Put a little bit edible glue on the sides of the shoe.

Step 12

Brush some edible glue on the edge of the sole and on the sides of the front piece of the bootie, place the back piece in position and press it so it fixes well.

Step 13

Take a piece of paste and colour it with edible brown colouring powder

Step 14

Take a ball of the brown paste and form a slightly elongated shape. This will be the body of the teddy bear.

Step 15

Put the teddy bear body into the bootie and check that it fits. There should not be too much space around.

Step 16

With the tip of small scissors, we texture the entire body of the teddy bear.

Step 17

Put a little edible glue in the sole of the bootie and the fix the body of the teddy bear into the bootie.

Step 18

Roll 2 small sausages, which will be the arms of the teddy bear. Set aside for later.

Step 19

Take a piece of paste and colour it with edible pink powder.

Step 20

Roll out to form a lace with the piece of pink paste.

Step 21

Pass the lace through the eyelets of the boot.

Step 22

Stick the arms on the body and texture the same way we did before

Step 23

Now we are going to make the ears. To do this, make 2 small balls with the brown paste.

Step 24

Then repeat this with 2 smaller balls of pink paste.

Step 25

Gently flatten all the balls we have made and glue each pink ball onto each brown ball.

Make a ball to form the head and a small cylinder for the mouth area. Use 2 black sugar pearls for the eyes.

Step 26

Glue the mouth area onto the head.

Step 27

Put some edible glue in the area of the ears and glue them in place.

Step 28

Make a small ball with brown paste to make the nose.

Step 29

Make 2 small holes where we will place the sugar pearls for the eyes, put a little edible glue and stick them.

Step 30

Mark with a dresden tool the smile of the teddy bear.

Step 31

Texturize the whole head.

Step 32

Stick your head on the piece that we have already made.

Step 33

Make a body for another teddy bear, which we will place inside the other bootie. In this case, the bear will go “upside down”

Step 34

For this teddy bear we only need to make 2 legs and a tail.

Step 35

Stick the legs and tail in place, so that it seems that the teddy bear got into the bootie head first, and texturise as the other items.

Step 36

We make some small balls with pink paste to form the bear’s footprint

Step 37

With a little gold paint colour the edge of the cake.

Step 38

We can also give a golden touch on buttercream flowers.

Step 39

Place the booties on the cake.

CUTE BABY ELEPHANT

CUTE BABY ELEPHANT

Skill level: BEGINNERS

TIP:

Tina recommends drying the parts before attaching them to each other. The body especially should dry a couple of hours before you place the head so that it can support the head. Also, if you pre-make the hole where the stick will go in, it helps with drying out the centre of the body faster.

You will need:

  • Saracino model paste 300g (Light blue)
  • White, black and dark blue model paste for eyes
  • Flower former or soft foam for drying the head
  • Ball tool
  • Dresden tool
  • Exacto knife

Step 1

Take a ball of the light blue paste and form into the shape of the body.

Step 2

Cut the top of the body to get a flat surface.

Step 3

For the head, take a Styrofoam ball and insert a wooden stick (to go into the body as support). You could make the entire head with model paste but since it is much bigger than the body, you need to ensure enough drying time for the body to support the weight of the head.

Step 4

Cover the ball with the blue paste.

Step 5

Shape the cheeks using your finger to go from one side to the other.

Step 6

Place the head on the body.

Step 7

Take 2 tear drops for the hair.

Step 8

Merge the seams using your Dresden tool. You could even use a touch of water.

Step 9

Place on the head and merge the seams again.

Step 10

Shape the paste to form the trunk.

Step 11

Using your ball tool shape the tip of the trunk.

Step 12

Using the Dresden tool, make a few deep ridges.

Step 13

Fix the trunk on the head as shown in the picture. It helps if the trunk is dry. If you are in a hurry and don’t have time to dry it completely, you could even add a wire into the trunk that would go into the head as a support.

Step 14

Merge the seams.

Step 15

Using the Dresden tool, make a smile right under the trunk 😊

Step 16

Like so!

Step 17

Make a small sausage shape and cut it into half.

Step 18

Stick it on to the baby elephant to form the back legs, making sure that the flat side is at the bottom.

Step 19

Again, make a sausage (bigger than the first time) and cut into half.

Step 20

Form the front legs coming down from the shoulder.

Step 21

Using just a tiny bit of paste form a thin long sausage and press down on one side to form the tail.

Step 22

Using the Dresden tool mark the tip to form the hair.

Step 23

Stick it onto the baby elephant.

Step 24

Using the ball tool Make 2 holes for the eyes.

Step 25

Fill it with white paste. Using a slightly smaller ball tool, do the same again.

Step 26

Using the ball tool make a little dip just above the white of the eye to form lids.

Step 27

Add blue and black paste to form the iris and pupil.

Step 28

Shape the ears. Add another layer that is slightly smaller than the base in a lighter colour.

Step 29

Attach the ears to the head.

Step 30

Paint the eyelashes, eyebrows and toes. Baby elephant is ready!

L.O.L. SURPRISE DOLL

L.O.L. SURPRISE DOLL

Skill level: BEGINNERS

TIP:

Always look at the picture of the figurine you want to make. Pay attention to details such as bows, neckless or hair style. To make correct proportions adjust paste to the printed picture.

You will need:

  • Dresden tool
  • Large ball tool
  • Small ball tool
  • Rolling pin
  • Small brush
  • Large brush
  • Exact knife
  • Skewers
  • Scales silicone mould
  • Clear alcohol
  • Edible glue or water
  • Dummy
  • Saracino modelling paste: skin tone, tiffany, fuchsia, pink, white, black
  • Saracino dust colours: brown, black, blue, pink, white

Step 1

Prepare about 70 grams of skin tone modelling paste and mix it with small amount of brown dust color for darker shade. Adjust the amount required to suit the model you have chosen.

Step 2

Print photo of the figurine you want to make.

Step 3

Divide coloured paste for each part of the body and adjust to the picture to make correct proportions

Step 4

Take the leg part and roll it to small roller shape. Cut in a half.

Step 5

Give both parts carrot shape.

 

Step 6

Use small finger to shape ankle and bend it to make the foot.

Step 7

Use small amount of skin tone paste to make sole of the shoe.

Step 8

Take the wooden skewers and push through the legs. Place them on the dummy.

Step 9

Roll and cut strips from tiffany modeling paste to make shoes.

Step 10

Take another part of the paste for the belly and give it pear shape. Set aside for a moment

Step 11

Take small amount of fuchsia paste. Roll it and cut two small leafs. Using a sharp edge form veins on each leaf.

Step 12

Using rolled pink paste print the scaled pattern onto the skirt.

Step 13

Use a skewer through the body. Using edible glue or a small amount of water stick the mermaid tail and the skirt to the body. Add small bows to the shoes.

Step 14

Roll Tiffany paste. Cut out a shell shaped bra. Fix to the body.

Step 15

Roll two arm shapes. Using your small finger mark wrists.

Step 16

Use ball tool to flatten palm.

Step 17

Cut thumb and using blunt side of the knife mark fingers.

Step 18

Attach one arm to the body using glue or small amount of water. Leave the other arm to one side until required.

Step 19

Take printed picture and adjust the head shape to it.

Step 20

Choose the right size of ball tool to make the eye sockets.

Step 21

Make eyes sockets. Look at the printed picture to make them in the right position.

Step 22

Take white paste and make balls. Adjust it to the sockets.

Step 23

Use blue Saracino dust diluted in vodka to paint the iris.

Step 24

Use black Saracino dust diluted in vodka to paint the pupil and eyelashes.

Step 25

Roll a small amount of black paste to form thin lashes and stick it to the eyelid. Cut off the excess.

Step 26

The same way make the brows from the tiffany paste.

Step 27

Take a small ball of the paste and make a small nose. Use fuchsia paste to make lips. Seperate the upper and bottom lips.

Step 28

Use dresden tool to shape open lips.

Step 29

Create definition on the lips using a Dresden tool.

Step 30

Use pink Saracino dust colour to make blush.

Step 31

Add some shine and life to the eyes by painting several white dots.

Step 32

Attach the head to the body. Insert a small skewer ready for fixing the other arm.

Step 33

Stick arm on the skewer and attach it to the body.

Step 34

Take tiffany paste and flatten it to pancake shape. Attach it to the head.

Step 35

Using a Dresden tool create a hair look to the paste.

Step 36

Take another part of the tiffany paste and make cone shape. Check if the amount of the paste is correct.

Step 37

Flatten the paste by the palm of your hand.

Step 38

Using the knife tool draw lines imitating hairs.

Step 39

Model hairs and glue it to the head.

Step 40

Give a little shine to the skirt and hair of your mermaid using lustre powder.

S.A.F.E. TOGETHER

S.A.F.E. TOGETHER

JOIN ‘S.A.F.E. TOGETHER’

We are delighted to announce our new project where as a team we help others

 

Since S.A.F.E. announced the raffle ticket draw that will take place at the November 2019 Cake International show in Birmingham, we have received lots of queries from various cake makers. You were asking us how you could help, how you could get involved with our fundraising, if Hope House is the only place we will be supporting and if we will be helping in any other ways?

We took all your queries and comments into consideration and decided to start something completely exclusive for all the UK Cake Makers who are happy to be a part of this great cause and keep helping others. This has resulted with us starting something DIFFERENT which gives you the opportunity to be a part of SOMETHING BIG.

TEAM WORK MAKES THE DREAM WORK

There is so much truth in this saying. All of us cake makers and artists from the UK make cakes every week, what if we said that for a small regular donation we can all help someone that YOU WILL NOMINATE? YES you get to choose who we give the money to.

Yes, you will be able to nominate and help choose the charity, organisation, school or any worthwhile cause you wish to help? We can hear you ask…… HOW?

Here at S.A.F.E. we have decided to give everyone the chance to be part of our team. We are calling this team initiative ‘S.A.F.E. TOGETHER’

What do you have to do to join the team?

All you have to do is donate £1 a week. Is this a lot? No, its not even a small coffee from your favourite coffee shop. But it is a small amount that will HELP.

How will this small amount help?

Because we believe that the cake community is a generous world we are hoping to find more generous people like you who are more than happy to donate £1 per week to make others smile.

How do you get to choose who the money goes to?

Simple, when setting up your donation you provide us with the name of the cause you would like to support. The system will automatically choose the cause the money raised goes to.

We are currently planning on making the draw every two weeks. Our aim is to reach over 400+ people in the team and when this is achieved we will make the draw a weekly event. That is £400+ to a chosen cause each week.

With this small donation from each of you we can do something amazing as a team together. When you submit your interest we will request that a Direct Debit is set up. This is currently only for the cake makers from the UK.

Do you think you can afford £1 per week? It’s not a massive amount but all taken together as a team will make a difference to the amount raised for each draw.

As from now through the whole of August we would like to receive all your applications expressing your interest in becoming a part of our team. From the 1st September 2019 we will start collecting funds and draw the first lucky cause on the 16th of September 2019.

You will also be invited to our exclusive ‘S.A.F.E. TOGETHER’ Facebook group where we will keep you all posted with our plans and activities. You will also receive a badge that you can wear with pride to show that you are in the ‘S.A.F.E. TOGETHER’ fundraising team.

But this is not everything!

Each time we make a draw and announce the name of the cause the money goes to, we will also announce a lucky winner from the donating team. YES!!! For those who are in our team we will have a regular small Saracino gift too. The lucky winner and your cake page will also be shared on our Social Media so great coverage for you.

So tell us…are you in? Are you ready to help us help others? Remember the bigger the team we create the more money we will raise for the worthwhile causes. Our aim is to make the team as large as possible so if you are interested tell your friends, tell friends of friends!

How To JOIN?

Please mail us on info@saracinodolci.co.uk with your name, facebook page and the name of the cause you would like to support. We will then invite you to our secret Facebook group where you will be kept updated with the latest.

We are also very honoured to announce that this initiative is backed up by the Cake International Show who believe in this project as much as we do and they have agreed to become our Official Social Media Partner.

We are counting on you! 

CURRENT GROUP MEMBERS

Sylwia Anna Price – Saracino SRL

Melanie Underwood – Cake International 

Wayne Price – Melys Cake Design

Jill Saunders

Xenia Robeson – Xenia’s cake creations

Calli Hopper – Calli Creations

Shereen Van Ballegooyen – Shereen’s cakes and bakes

Aurelia Czarnecka – Aurelia’s Cake

Zaneta Wasilewska – Cakes by Jeanette – Zaneta Wasilewska cake designer

Rachel Wyatt-Brown – The Old Piping Bag

Carol Smith – Cakes by Carol

Melanie Williamson – The Custom Cakery

Trudy Smith – The Chain Lane Cake Co

Nichola Gunn – The Elite Cake Company

Urszula Maczka – Sugar Atelier

Wioletta Adamska – My Sweet Miracles

Tammy Anne Marie Delph – Tammy’s Happy Tiers

Zlatina Lewis – ZL Cake Boutique

Shell Robinson – Spotty Cake Tin

Dorota Koczorowska – Peterborough – Domowe Wypieki Torty Na Roznego RodZaju Okazje

Beata Goraca –

Zee Chik – Zee Chik Designs

Nina Evans Williams – Ninas Cake Cabin

David Brice – CakeFlix

Lynsey Wilton-Eddleston – Sugarwhizz

Michelle Pattinson – VS Cakes