HAZELNUT POPS IN DARK CHOCOLATE

HAZELNUT POPS IN DARK CHOCOLATE

Author: Justyna Kowal

Skill level: BEGINNERS 

You will need:

  • 100g natural yoghurt
  • 1 egg
  • 50g vegetable oil
  • 100g sugar
  • 80g wheat flour
  • 40g roasted hazelnut flour
  • 20g cocoa powder
  • ¾ teaspoon of baking powder
  • pinch of salt
  • 3 teaspoons Saracino Supreme hazelnut paste
  • 100g mascarpone cheese
  • Saracino dark chocolate drops
  • Chopped hazelnuts for decoration
 

Step 1

Bring all the ingredients to room temperature.

Step 2

Put the egg and the sugar into a small bowl

Step 3

Mix until a smooth consistency is achieved. 

Step 4

Add the yogurt and the oil.

Step 5

Mix until smooth

Step 6

Add flour and baking powder to the next bowl.

Step 7

Add cocoa powder and roasted hazelnut flour

Step 8

Mix all ingredients together

Step 9

The two bowls are ready to be combined

Step 10

Add the dry ingredients to the liquid mixture and gently mix

Step 11

Line your baking tin with the baking paper 

Step 12

Add the mixture

Step 13

Bake for 30 minutes at 170C

Step 14

Remove the cake from the tin and allow to cool down

Step 15

Break up the cake into small pieces

Step 16

Prepare the mascarpone cheese and Saracino hazelnut food flavouring

Step 17

Add the mascarpone and the Saracino hazelnut paste to the cake

Step 18

Using your hands mix all together 

Step 19

Roll small balls and place them on baking paper. Use the same amount of mixture for each ball so they are the same size. When ready place in the fridge for 30 minutes.

TIP – Use a digital scale to achieve the correct amount of mixture for each ball.

Step 20

Get the lollipop sticks and Saracino chocolate drops ready. 

Step 21

Melt the chocolate over water or microwave and add to a tall jug or glass. You can add cocoa butter or sunflower oil to achieve a more liquid consistency. Prepare nuts for decorating 

Step 22

Dip the end of the stick into the melted chocolate and insert into the ball. Let it set

Step 23

Holding the stick, dip the ball in the chocolate, allow the excess to drain into the glass, and before it sets firm, sprinkle with the crushed nuts. Place the half hazelnut on top, next to the stick.

Step 24

You can now serve and try your hazelnut cake pops! 🙂

BEAUTIFUL WEDDING CAKE TUTORIAL

BEAUTIFUL WEDDING CAKE TUTORIAL

Skill level: INTERMEDIATE

TIP – You can cover your two tiers with Saracino Pasta Top. To learn how to cover your cakes and create sharp edges follow the link

HERE – for picture tutorial 

HERE – for video tutorial 

You will need:

  • Saracino Royal Icing 

  • Saracino white flower paste – Pasta Bouquet

  • Saracino sugar paste/fondant – Pasta Top

  • 2 dummies of 15 and 20cm or a cake of 2 tiers

  • Rotating base

  • Scraper

  • Floral ribbon

  • Pliers

  • Brushes

  • Spatula

  • Water

  • Bowl and whisk

  • Cornstarch

  • Vegetable fat

  • 18 or 20 gauge floral wire

  • 30 gauge floral wire

  • Edible glue

  • Clear alcohol

  • Powder colours: gold, yellow, green and dark pink 

  • Dogwood cutters set

  • Set of dogwood veiners

  • Set of rose cutters

  • Rose texturizer

  • Foam pad

  • Porexpam to puncture the flowers

  • Ball tool

  • Rolling pin

  • Cake stencil with a pattern of your choice

Step 1

To make the roses, start by rolling a piece of Pasta Bouquet to cover the center we are going to use. It does not need to be too thin.

Step 2

Insert a 18 or 20 gauge floral wire into a center for roses (a porexpam cone can be used) and coat it with a little edible glue.

Step 3

Cover the rose centre with the rolled out Pasta Bouquet as shown

Step 4

Cut off the excess and adjust well.

Step 5

We will need 3 centres.

Step 6

Roll a little Pasta Bouquet with a rolling pin until it is very thin (it needs to be as thin as possible so that the petals turn out to be realistic). We will need to cut out 9 small petals.

Step 7

Place the petals on your foam pad and using a ball tool thin the edges

Step 8

Add texture to the petals using a veining mould. Sprinkle a little cornflour on the veiner’s before use to stop the petals sticking.

Step 9

Cover the rose bud with edible glue

Step 10

Place the first petal, leaving a little height over the center.

Step 11

Wrap the petal around the bud so it is tightly closed like the centre in the picture

Step 12

Apply a little glue to the lower half of 2 petals.

Step 13

Place the first of those 2 petals over the fold of the centre petal and at the same height.

Step 14

Fix the second petal directly opposite

Step 15

Pull one edge away from the bud. Insert the opposite petal below and fix to the bud.

Step 16

Turn the flower around and repeat so the two petals are overlapping and look as shown

Step 17

Adjust the sides well so that it is closed.

Step 18

Now we start fixing the next row of petals. We take the first one and place it over the joint of the previous 2 and at the same height as these.

Step 19

From the middle of the petal fix another petal perpendicular to it, then fix the third petal.

Step 20

Put a little edible glue on the side that remains free.

Step 21

Adjust to close over the center but without squeezing too much, so that it gets volume.

Step 22

Cut 3 petals of the largest size and perform the same operation as with the previous ones. We texture and thin the edges with a ball tool as previous petals.

Step 23

Fix this layer of petals as with the previous layer

Step 24

Apply a little glue on the free side and tighten over the center, closing each petal less and less. Curl the top using the handle of a brush to give it movement. 

Step 25

Make as many rounds of petals as you want, depending on whether you want a more open or more closed flower. 

Step 26

Using a brush put a little cornflour in the dogwood mould so that the Pasta Bouquet does not stick and we can remove it easily.

Step 27

Press a small ball of Pasta Bouquet into the moulds

Step 28

Dip the end of a 26 gauge floral wire into edible glue.

Step 29

Insert the wire into the center of the dogwood.

Step 30

Press the base of the wire so that the center is well attached before removing it from the mould.

Step 31

Carefully, we extract the center. Let’s do about 10 centers to have 10 flowers.

Step 32

Roll out some Pasta Bouquet and cut 2 wide and 2 narrow petals for our dogwood flower.

Step 33

We now need to wire the petals. Place a petal in the veiner, dip the end of a 30 gauge floral wire in edible glue and cover it with a small piece of pasta bouquet to fix it to the petal.

Step 34

Press with the other side of the veiner

Step 35

Press well on the base to fix the petal to the wire and secure it well.

Step 36

Perform the same operation with all the petals.

Step 37

Using a soft brush dust the flower centre with yellow powder. Then using the same brush dust with green powder

Step 38

Attach the first 2 petals of the same size to the centre using floral tape. The petals should be directly opposite each other.

Step 39

Attach the other 2 petals so they are directly opposite each other.

Step 40

Dust the upper end of each petal with dark pink powder colour and then with a little green.

Step 41

Fix the flowers to each other using florist tape

Step 42

Prepare the royal icing (follow the instructions on the package) 

Step 43

You will need a consistency that is slightly runnier than the texture of toothpaste.

Step 44

Fix the chosen stencil on the cake and spread the royal icing with a spatula

Step 45

Remove the excess with a scraper.

Step 46

Carefully remove the stencil. Let the royal icing dry

Step 47

Prepare a small amount of gold paint by mixing the gold powder colour with a few drops of clear alcohol.

Step 48

Paint only a few parts to give a worn effect.

Step 49

Put the flowers on the cake. Use your pliers to bend the wires so they curve around the cake without the need to insert a flower pick.

Step 50

Your cake is ready 

UNICORN PARTY CAKE

UNICORN PARTY CAKE

Skill level: INTERMEDIATE 

You will need:

  • White Saracino pasta model

  • Saracino pink and gold powder colour

  • Saracino white gel colour
  • Cake or dummy circular about 20cm high

  • Circle cutter

  • Knife

  • Large cocktail stick

  • Clear alcohol

  • Pink, light blue and blue Saracino pasta model

  • Work base

  • Thin brush

  • Ball tool

  • Silicone brush

  • Modelling tools
  • Black and brown food marker pen

Step 1

Cover your cake with sugarpaste. For best results use Saracino Pasta Top.

Tip : Pasta Top is Vegan, Gluten free and has NO hydrogenated fats. 

Step 2

Using a soft brush gently blend from the base upwards with the pink powder colour, be careful not to use too much colour and you can tap the brush onto a sheet of kitchen paper to remove excess. Do the same from the top of the cake downwards.

Step 3

Using your circle cutter cut out two circles. Using the same cutter cut out two crescent shapes.

Step 4

Using your fingers shape the crescent into an eyebrow.

Step 5

Repeat so we have two eyebrows. 

Step 6

Mix your gold dust colour with the clear alcohol and paint both eyebrows. Fix where required on the side of the cake.

Step 7

Using your circle cutters cut out two large and two small circles. Use a sharp knife to cut the top of each circle into a triangle shape.

Step 8

Using the gold paint, colour the two smaller circles.

Step 9

Fix the smaller painted pieces into the larger shapes to form the ears.

Step 10

Now for the Unicorn horn. Roll out two thin cone shapes from your white modelling paste. 

Step 11

Twist the two together to give the spiral effect.

Step 12

Roll it tightly and then insert a cocktail stick or skewer into the base to provide support.

Step 13

Using your gold colour paint the horn. Fix the horn and the ears to the top of the cake. 

Step 14

For the flowers cut out circles of different colours. 

Tip : You can choose any colour scheme to match your occasion.

Step 15

For each flower create a central bud by rolling paste into an egg shape. Then start applying the petals around each bud.

Step 16

Cut the larger petals in half to give the effect you need for each flower.

Step 17

Keep fixing the petals working around the buds.

Step 18

Tuck each petal inside the one previously applied and fix.

Step 19

Make as many roses as you want to give the look you need. Fix to the top of the cake to give the unicorns hair look. We will go onto the filler flowers next. 

Step 20

For the filler flowers use your fingers to roll out cone shapes as shown.

Step 21

We cut the largest part of the cone in half and then half again in the other direction to give four petals.

Step 22

We spread the cut parts to form a four-petal flower. Use finger pressure or a ball tool to spread them and give form to make look realistic.

Step 23

Now dust your filler flowers using pink Saracino powder colour. Place the filler flowers among the roses to fill in any gaps.

Step 24

Use as many roses and filler flowers to give the effect you would like to see on your cake. 

Step 25

For the babies head roll a ball and with your fingers press to create the eye sockets. Use a silicone tool to form the nose.

Step 26

We create the nostrils and shape the nose with the silicone tool.

Step 27

Use a ball tool to create the eyebrow arches.

Step 28

Use your ball tool to create the eye sockets. Then roll two small balls of modelling paste to create the eyes.

Step 29

Insert the balls inside the holes to create the eyes.

Step 30

Make two smaller circles of brown paste and fix to each each ball.

Step 31

Roll out some of your brown paste very thinly and attach a strip above each eye for the eyebrows. 

Step 32

Use your Dresden tool or similar to form the lips. The use a small ball tool to create the sides of the mouth.

Step 33

Create the pupil with a black food marker.

Step 34

Blend the iris with the brown food marker.

Step 35

Use your small ball tool to shape the mouth into the expression you require. Using white Saracino gel colour apply tiny dots to each eye. 

Step 36

Your modelled face should look similar to this. 

Step 37

Roll out an oval shape of your white paste for the body.

Step 38

Using your fingers raise one end of the oval shape. 

Step 39

Use your ball tool to press the neck and sockets for each leg.

Step 40

For the neck roll out a tube of your pink paste. Cut short and fix into the socket made for the neck.

Step 41

Use a cocktail stick to attach the head to the neck in the angle you would like. For the hair roll out yellow paste into thin strands. Start applying to the head to build up the hair style. Use your ball tool to form shoulder sockets. Roll two strands to create the unicorn horn for the little girls head. Twist them together.

Step 42

Press down the hair strands with your silicone tool. 

Step 43

Form the arm with pink paste and create the palm of the hand with the thumb.

Step 44

Form the four fingers. Now repeat for the left arm and hand.

Step 45

Place the girl in front of the cake and attach her arm and the unicorn horn to her head.

Step 46

Roll a sausage shape of pink paste and cut diagonally in the centre for the legs.

Step 47

Use your fingers to roll out the foot and ankle from the thinner part of the paste.

Step 48

Roll gently on your mat to create the form of the leg and knee.

Step 49

Make four small cuts on the back of the foot to form five toes.

Step 50

Fix the legs and the arms to the little girl. Model them into the shape you would like. 

Your model is now finished and ready to WOW your friends. 

SUGAR SUCCULENT TUTORIAL

SUGAR SUCCULENT TUTORIAL

FB: CALLI CREATIONS

Skill level: BEGINNERS

 

FROM CALLI:

Succulents are quick and fun to do and this one does not require any cutters or veiners, so limited use of tools, with your hands doing all the work.

I do hope you enjoy making this pretty little succulent as it sits well with most cake designs. Have fun!!!

 

You will need:
  • Saracino Pasta Bouquet
  • Saracino Colour dusts (Green, Yellow, Red, Purple, White)
  • Saracino Green gel colour
  • Foam Cel Pad
  • Cel Board
  • Non-stick rolling pin (approx 9” is sufficient)
  • 24 gauge, white or green wires
  • Nile green tape (¼ inch)
  • Edible glue (can make your own mixing a little tylose powder with water)
  • Corn flour (in case you need to dust board and hands)
  • Wire Cutters
  • Balling Tool
  • Kitchen Roll sheets
  • Dusting brushes (Appox size 2 or 3. I prefer the soft flat ones)

Step 1

On your cel board, knead some flower paste with Saracino Green gel colour

Step 2

Then divide into lots of little small balls, roughly the size of a pea, make some bigger and some smaller as the succulent has various size leaves.

Step 3

Gently squeeze and flatten each ball with your fingers

Step 4

Insert a 24 gauge wire into each petal.

Tip : Use a little Saracino edible glue on the end of each wire to secure in place.

Step 5

Keeping the centre thicker use your fingers to flatten the edges of each petal.

Step 6

Using a balling tool. Further thin the very edge, on your cel pad

Step 7

Shape each leaf between your thumb and forefinger to form a gentle curve to give a natural look

Step 8

Or use your cel pad base to simply push and give each petal definition

Step 9

Repeat this around 20 times (up to you how many leaves you want in your succulent). Leave to dry for a few hours or ideally overnight.

Step 10

Use a piece of kitchen towel and sprinkle some green and yellow colour dust and loosely mix it 

Step 11

Gently dust the green mix over front and back of each petal

Step 12

Sprinkle red and a little purple onto your kitchen roll and loosely mix

Step 13

Dust around the edges of leaves, then drag some of the colour inwards in places to blend it.

Step 14

Using white dust, over dust each petal in the centre mainly, front and back

Step 15

Here is what it looks like from start of colour to finish

 

Step 16

Here are all the leaves fully dusted and various sizes. Don’t worry about the white on the leaves, as later you will see how that all blends in

Step 17

Take one of the smaller leaves and start taping the wire from base of leaf downwards for a short length

Step 18

Take two different sized petals and add them and fit them close together

Step 19

Add more petals to build up your succulent.

Step 20

Add more petals, fitting them close as close you can

Tip : Nature is not exact so random creates a more natural look

Step 21

Keep going  till all the leaves are assembled in a roughly circular way

Step 22

And here is your succulent completed

Step 23

Then you need to steam the succulent. I did this over the spout of a boiling kettle, being very careful not to get burnt from the steam, so don’t get too close as it could also melt your sugarpaste.  This not only blends all the colours together, but gives it the succulent a waxy sheen too.

Tip : You can use a cake steamer if you have one.

Step 24

To give you a better view, I’ve taken a picture from a different angle. 

Step 25

I’ve added an African themed cake ( Ref: Sugar Art 4 Autism for more details) I created a few months ago, to show how the succulent sits with the theme. As an aside, the whole floral display was made using Saracino Pasta Bouquet and the colours as well as hand painted using Saracino cocoa butter and Saracino colour dusts.

FONDANT TREE BARK TEXTURE

FONDANT TREE BARK TEXTURE

Skill level: BEGINNERS

You will need:

  • Saracino Pasta Top

  • Saracino Liquid airbrush food colour brown

  • Saracino Liquid airbrush food colour orange

  • Saracino Liquid airbrush food colour red

  • Saracino concentrated gel food colour green

  • Saracino concentrated gel food colour black

  • Aluminum foil

  • Rolling pin

  • Airbrush

  • Grated coconut

  • Steel spatula

  • Modelling tools

  • Set of round cutters

  • Small brush

  • Edible glue

  • Cake drum

  • Scissors

Step 1

Place the white Pasta Top on your work surface and roll the fondant out evenly.

TIP: Pasta Top is VEGAN friendly, GLUTEN FREE and has NO HYDROGENATED FATS. 

Step 2

For the top of the tree place the fondant gently over the top of your cake (or dummy)

Step 3

Remove the excess paste with a knife around the edge of the cake.

Step 4

Save the removed paste for later.

Step 5

Use different sizes of round cutters to press into the paste on top of the cake. You can use a modelling tool also to create circles on top of the cake.

Step 6

Create strips with your modelling tool at two opposite sides of the cake, so it looks like the tree has been cut.

Step 7

To cover the side of your cake roll out a piece of fondant evenly into a rectangular shape. We are going to cover the side of the cake with Pasta Top. This can be done in panels if needed.

Step 8

Take a piece of aluminum foil and scrunch into a ball. Then un-fold so you create a textured pattern in the foil. Place the foil on top of your paste and use your rolling pin to roll the foil into the paste.

Step 9

Repeat step 8 to make sure the texture is all over your paste. Remove the foil and cut a rectangle. Take the height of your cake into account.

Step 10

Create long teardrop-shaped pieces of fondant to create tree roots. Create different lengths and thicknesses. Use a little edible glue and push the teardrop-shaped pieces against your cake at different places. Decide for yourself how many roots you are going to make.

Step 11

Take the rectangle fondant and place it against the side of your cake, use Saracino gel or water to stick the fondant to your cake.

Step 12

Use scissors to remove the excess fondant that rises above the edge of your cake. You don’t have to cut it neatly.

Step 13

Repeat steps 8 up to 11 for covering the side of the cake if you cannot achieve it in one piece.

Step 14

Where the side panels meet press them together to join. It does not have to be too neat as a real tree is never smooth and perfect

Step 15

You can work the seams of fondant with a piece of aluminum foil.

Step 16

Just press the foil onto the paste so you don’t see the seams anymore.

Step 17

Press the foil at the top of the cake so you won’t see the cuts you made removing the excess fondant at the top.

Step 18

Press gently from top to the bottom of the seam. Repeat this step for each seam of fondant

Step 19

If you want to give your bark more dept, push a piece of foil deeper into the fondant. Repeat this for your whole cake.

Step 20

Use a modelling tool to create a dent in your fondant tree.

Step 22

Repeat step 20 as many times as you like

Step 23

Get your airbursh ready to use.

Step 24

Always start with the lightest airbrush colour orange.

Step 25

Cover the whole cake with a light orange airbrush colour. Turn you cake while brushing. Use a turntable if you want to.

Step 26

The next airbrush colour is red. Airbrush the rifts and dents in the cake. Don’t airbrush the whole cake, just the dents, sides of the roots and some dents in the cake.

Step 27

The next airbursh colour is brown. Airbrush the whole cake with the brown airbrush colour. Make sure you airbrush some parts darker than other parts.

Step 28

Place a clean natural sponge in water. Squeeze the sponge well until there is no more water in the sponge (very important!)

Step 29

Run the sponge along the cake very gently, don’t press too much. Remove just a little airbrush colour

Step 30

Put some grated coconut on a dish and use little bit of the green gel colour. You can use a drop of water to spread the gel colour (it’s better to colour the grated coconut one day before you make your cake!) if you want a darker green, you can add a drop of black gel colour

Step 31

Use a brush and a little edible glue to fix the grated coconut to your cake, place anywhere you would like.

Step 32

Use a spatula to place the coconut on top of the glue.

 

Step 33

Your tree cake is ready. Decorate your tree cake anyway you want to! Have fun! I made some mushrooms for my cake.