SLEEPY TEDDIES CAKE TUTORIAL

SLEEPY TEDDIES CAKE TUTORIAL

Skill level: BEGINNERS

You will need:

  • Saracino Pasta Top : white
  • Saracino Pasta Model : white, brown, yellow and black
  • Saracino powder colours : white, blue, yellow and red
  • Saracino powder : light gold
  • Saracino Liquid Shiny confectioners glaze
  • Saracino Wafer paper 0.27
  • Saracino cake gel
  • Brown edible food pen
  • Round cake with a diameter of about 18cm
  • Silicone pad
  • Roller
  • Craft knife
  • Ball and other modelling tools
  • Round cutters
  • Round nozzle
  • Paint brushes
  • Scissors
  • White florist wires
  • Water

Step 1

For covering the board and the cake, mix blue and white Saracino Pasta Top together. For the board roll out thinly and cut into strips and squares of different sizes. Fix randomly on the board to cover the entire area with ‘paving’.

Step 2

Using a bunched up piece of aluminum foil add texture to the board.

Step 3

Dust the board with Saracino blue powder colour. Add areas of white using white powder colour.

Step 4

Dust the top and bottom of the cake using the blue powder colour.

Step 5

For the teddy bear, mix brown and white Pasta Model. Roll a teardrop shape for the body. Flatten the back.

Step 6

Use a sharp pair of scissors to cut the fur texture.

Step 7

Use the brown Pasta Model that we used for the body to roll the head and model the ears. Use a light brown for the nose. 

Step 8

Texture the head and ears with scissors. Add light brown paste into the ears. Use a ball tool to form eye sockets. Mark the mouth and nose using a modelling tool.

Step 9

Use black Pasta Model for the eyes and nose.

Step 10

Using the dark brown paste model the bear’s legs and arms.

Step 11

Add the fur texture using the sharp scissors. Fix the arms and legs to the bear.

Step 12

For the blanket roll a rectangular shape of white Pasta Model. For the patchwork pieces cut out shapes using brown paste. 

Step 13

Fix the brown “patches” to the blanket. Cut out small strips of white paste and fix as shown to give the stitching look. 

Step 14

Add a stitching look to the blanket by painting around the edges with a brown edible food pen.

Step 15

Fix the bear to the cake. Add the blanket into the bears arms. Fix small pieces of brown paste to the bears feet then add small pieces of white paste to give the stitching look.  

Dust the bear to add shade using brown powder colour. Paint small white highlights to the eyes and nose using white powder mixed with Liquid Shiny confectioners glaze.

Step 16

For the crescent moon mix yellow and white Pasta Model. Roll out and shape the crescent.

Step 17

Using ball tools of differing sizes add holes to the moon surface. Allow to dry. 

Step 18

Fix the moon to the top of the cake. Insert a toothpick to add additional support. Dust the edges of the moon with orange powder colour. Paint the moon surface with light gold powder mixed with Liquid Shiny glaze. 

Step 19

Cut out large stars from wafer paper. Paint one side of a star with a little water. Add a flower wire to the star and press another star shape over. you will need some stars without the wire.

Step 20

Mix yellow powder colour with Liquid Shiny confectioners glaze. Paint both sides of the star and allow to dry. Mix white powder colour with Liquid Shiny confectioners glaze and paint white dots on the stars.

Place wired stars to the back of the cake. If you are using a real cake use posy picks or straws. Fix a few stars to the front of the cake.

Step 21

Mix brown and white Pasta Model for the rabbit. Model the rabbit in a similar way as the bear. Do not texture the fur and make the rabbit’s ears longer.

Use light brown Pasta Model for the nose and tummy. Add eye sockets using a ball tool. Use a sharp tool to draw the line on the head.

Step 22

Add black Pasta Model for the eyes and nose. Draw the mouth and tummy lines with a modelling tool.

Step 23

Dust the rabbits ears and cheeks using pink powder colour. Fix the rabbit to the moon. Mix white powder colour with Liquid Shiny confectioners glaze and paint white dots in the eyes and nose of the rabbit. Use a sharp tool to add the mouth and tummy button.

Step 24

Use red Pasta Model to model three heart shapes.

Step 25

Mix white powder colour with Liquid Shiny confectioners glaze. Add white dots and lines on the side of the hearts. Fix one heart to the rabbit’s paw and two hearts on the cake board.

Step 26

For the buttons cut out a disk using light brown Pasta Model. Use a smaller cutter to mark the outline of the button.

Step 27

Using the end of a piping nozzle cut 4 holes in the centre of the buttons. Roll two white strips of white Pasta Model and insert them into the holes of the button for a stitching look. Mix white powder with Liquid Shiny confectioners glaze and paint white dashes on the side of the buttons.

Step 28

Your cake is ready!

CUTE RACCOONS BABY SHOWER CAKE

CUTE RACCOONS BABY SHOWER CAKE

INSTAGRAM: MADZIOWKA

Skill level: BEGINNERS

Inspiered by Tanyi Bonya

You will need:

  • Saracino Pasta Model: white, black, light blue, pink, yellow, violet, light green, brown
  • Saracino white Pasta Top
  • Saracino baby blue Pasta Top
  • Saracino powder colour: light gold, black, sky blue, pink, light skin tone
  • Saracino shiny effect confectioners glaze
  • Polystyrene balls: 1 x 6cm in diameter, 4 x 4cm in diameter, 7 x 2cm in diameter
  • Dummy cake or cake
  • Clear alcohol
  • Dresden tool
  • Ball tool
  • Rolling pin
  • Brushes
  • Fondant smoother
  • Cake drum
  • Toothpicks
  • Circle cutters

Step 1

Prepare all the necessary products and tools.

Step 2

Start by working the pastes to make them soft. You can start working right away with the pre-coloured pastes. For a soft and “dusty” sky blue, mix light blue Pasta Model with white and a little brown. Don’t be afraid to experiment until you get the colour you like.

Step 3

For the body roll and form the paste into a cylinder shape. Use the Dresden tool to shape into overalls.

Step 4

Place on a dummy and allow to dry slightly.

Step 5

Using white Pasta Model add the upper part of the torso inside the overalls. Using a ball tool add stitching to the edge of the dungarees and creases below the armpit areas.

Step 6

Using light blue paste roll two strips and round at each end for the straps. Cut out a small circle and cut out a semi circle – this will be a pocket.

Step 7

Fix the straps and pocket. Use the grey icing to model two legs as shown. Roll two strips of blue icing for the trouser legs. Roll two oval shapes from the white paste and attach to the soles of the feet.

Step 8

Fix the legs to the shorts and then wrap the trousers around the top of each leg. Use the Dresden tool to add creases to the trousers. Insert a short toothpick into the torso at the neck.

Step 9

For the head roll the shape shown. Use your index fingers or a ball tool to make two recesses for the eyes leaving a gap between them.

Step 10

Using white paste cut out terdrop shapes simialr size to the eye sockets. Use a knife or scalpel to cut off the small triangles at the top – they will look like fur. Glue both into the previously prepared recesses.

Step 11

Using a dark grey paste prepare elongated teardrop shapes, thinner on one side. Fix to the head and use the ball tool to make sockets for the eyes.

Step 12

Place your head onto the torso by sticking it onto the toothpick. Add a flattened oval shape as a snout. Mark the nose and add a smile.

Step 13

Using the dark grey paste cut out a shape as shown for the dark fur on the raccoon’s head. Prepare two white balls for the eyes, two blue balls for the irises, and two smaller black balls for the pupils.

Step 14

Roll out some brown paste and using a scalpel cut out the shape as shown to form the pilot cap. Prepare a strip of beige color and two circles with holes in the center. Gently flatten the circles into an egg shape. These elements will make the goggles.

Step 15

Add the eyes. Use tiny white beads to add a “sparkle” to each eye. Add the grey ‘fur’ piece. Add a black nose with a white ‘sparkle’. Fix the brown paste ‘helmet’ to the raccoon’s head. Add the elements to form the goggles. Add two sleeves using white paste.

Step 16

Prepare two paws from the dark grey paste as shown. Model small elements that will create the toy airplane. Let them set slightly and then glue together.

Step 17

Fix both paws to the arms. Add the toy airplane to the right paw.

Step 18

Form the shape of the ears from the black paste, stick the white centers to them (the same shape, only smaller).

Step 19

Place the ears on the raccoon’s head, gently bend them with your fingers to give character and form.

Step 20

For the cloud prepare polystyrene balls connected together with toothpicks.

Step 21

Roll out the white paste and put it over the balls. To help the paste stick you can moisten the polystyrene with a little water and a brush.

Step 22

Gently press down and pull the paste to cover the ball structure.

Step 23

Combine light pink paste with white paste, add a little brown for a soft colour. You can of course use the pre-coloured pastes if you wish. Model the shape of the tummy with the legs. Attach it to the cloud with a toothpick. If the raised leg is not set enough and drops you can insert a toothpick into it to keep it straight.

Step 24

Prepare a slightly darker shade of paste. Make a thin strap, a pocket shape and a mini heart. Using the lighter colour paste make a pocket shape. Fix the elements on the character’s tummy with a little glue if required.

Step 25

As with the previous racoon use grey paste to form the shape of the head. Use your finger or a ball tool to form recesses. Fill the recesses with lighter pieces of paste cut into a tear drop shape.

Step 26

Using a dark grey paste prepare an elongated teardrop shape flattened on one side. Fix to the face. Use a ball tool to make eye sockets.

Step 27

For the dark fur on the racoons head roll out a mid grey and cut out to the pattern shown. Roll two balls of white paste for the eyes. Using white paste shape the mouth area.

Step 28

Fix the dark fur on the head and cut to length by the nose. Add the mouth, nose, irises and ears as before. Use a Dresden tool to form the mouth and snout.

Step 29

Attach the head to the torso using a cocktail stick if required. Add two sausage shapes for the arms. Using the darker pink roll two small balls and press to a cuff shape. Fix to the end of the arms. Use a ball tool to form a recess in each cuff ready to fix the hands. Apply two small dots of white paste to each eye.

Step 30

Prepare balls of dark grey and cream paste. 3 different sized pieces of each colour. Arrange from the smallest to the largest alternately. Carefully press them together to form a roll shape.

Step 31

Roll the tail to give a point at each end.

Step 32

Fix the tail with a little glue. Model the hands and fix to each cuff.

Step 33

Apply a little water to the 6cm polystyrene ball.

Step 34

Roll out the dusty pink paste. Carefully cover the ball and smooth.

Step 35

Stick a toothpick into the ball.

Step 36

When the figurine is set and firm stick the toothpick into the top of the raccoon’s head. Take your time with this step as if the figurine is not firm enough the ball maybe too heavy.

Step 37

For the end piece of the balloon model a small cone shape. Prepare thin strips of the dusty pink paste. Two longer ones for the ribbons and two shorter ones for the bow. Fold in half and join them together as shown. Wrap a fifth piece around the end piece of the balloon.

Step 38

Fix to the balloon. Add a thin white strand of paste and place it in the raccoon’s hands. To obtain the effect of ribbons blowing in the wind use a construction of skewers and toothpicks as I have shown. Support the ribbons off the structure until they are set. Carefully remove the sticks checking that the ribbons are holding their shape.

Step 39

Finish off the characters by painting the eyes and noses with the Liquid Shiny confectioners glaze. Using a soft brush and the powder colours lightly dust the figures. Black for fur, blue for dungarees and the combination of pink and skin tone for the balloon and girl’s jumpsuit. To make the figures even cuter add a slight blush to the faces. Remember to control the amount of powder on the brush, apply the dust each time and then wipe the excess off the brush onto a paper towel.

Step 40

Prepare and work the purple, sky blue, green, yellow, powder pink and very light brown colour pastes. Add white paste to the pre-coloured paste to make the softer shades. Roll a long sausage shape of each colour and shape them into a rainbow. Trim the ends with a knife. Leave to set.

Step 41

Using Light Gold powder pearl colour mixed with clear alcohol carefully paint the light brown colour. Painting the gold over the brown makes coverage easier.

Step 42

Using baby blue Pasta Top cover the dummy or the finished cake.

Step 43

Glue the rainbow to the side of the cake and to the top. Optionally add white dots on the pink rainbow strip.

Step 44

Place the boy raccoon on the cake board and the girl raccoon on top of the cake. You may want to add additional decoration to the cake such as sprinkles or hand-cut confetti. On the side of the cake you can add paste covered polystyrene balls (these can also be cake pops or chocolate balls depending on your skills).

COLOURFUL FOREST CAKE

COLOURFUL FOREST CAKE

Skill level: BEGINNERS

You will need:

  • Pasta Top
  • Pasta Model
  • Pasta Bouquet
  • Wafer paper
  • Isomalt
  • Almond powder
  • Cake Gel Glue
  • Powder colours: yellow, green, brown, blue
  • Gel colours: red, blue, green, brown

Step 1

Cover a 15cm diameter x 14cm high tier and a 10cm diameter x 10cm high tier with white Pasta Top.

Step 2

Paint the cake with a brush, sponge or airbrush in shades of brown and meadow green.

Step 3

For the bark, colour 100g of Pasta Top in shades of light brown and dark brown.

Step 4

Roll the two brown pastes and a white paste to elongated sausage shapes and position side by side.

Step 5

Mix the colors until you get a beautiful, well-marked marbling.

Step 6

Roll out the sugar paste to a thickness of 3mm.

Step 7

Cut out a 50x14cm rectangle. I worked in two parts of 25x14cm to make it easier.

Step 8

Apply a thin layer of Cake Gel or other edible glue with a brush. Optionally you can mix CMC with water to make your own glue.

Step 9

You will need 0.27 Saracino wafer paper sheets.

Step 10

With a wafer paper sheet cover the strip of sugar paste. Be careful to put the rough side of the sheet facing up with the smooth side against the paste. Roll out in all directions.

Step 11

As you roll the wafer paper will tear and you will get a wood bark effect. Continue to roll to exaggerate the cracks and get the look you want to achieve.

Step 12

Using Saracino powder colours and a soft flat brush dust the cracks in shades of brown and green. The goal is to create a wood bark effect.

Step 13

You can exaggerate the cracks and give a slight 3D look by lifting with a scalpel blade.

Step 14

Emphasize the cracks with a darker shade of color.

Step 15

Trim the edges to return to the 50cmx14cm strip we had at the beginning.

Step 16

Cut into strips approximately 4cm wide.

Step 17

Roughly tear the top of the strips to a length of 2 – 3cm.

Step 18

Using dark brown powdercolour, dust the edges of the strips. Glue the strips to the cake using Cake Gel.

Step 19

Prepare a small sponge cake with: 15g Saracino almond flour, 15g white flour, 15g sugar, 50g egg white and a little yellow and green powder colours.

Step 20

Whisk the egg whites. Mix them to the rest of the ingredients. Microwave for approximatelty 3 – 5 minutes.

Step 21

Allow the sponge to cool.

Step 22

Crumble the sponge cake.

Step 23

Fix the cake pieces onto the main cake using Cake Gel.

 

Step 24

For the grass effect. Use a coffee grinder or blender to mix some Saracino almond flour with yellow and green powder colours.

Step 25

Use this mixture to complete the “grass” look on the cake. Fix using a thin layer of Cake Gel.

Step 26

For the mushrooms colour small amounts of Pasta Model with light brown, blue and red gel.

Step 27

For the mushroom stems use the light brown coloured paste. First roll a ball and use your fingers to roll into a tear drop shape.

Step 28

We will need three stems like this one. Make each of them slightly different size and shape.

Step 29

Take a ball of the light brown Pasta Model. Use a ball tool to hollow out and form a mushroom cap.

Step 30

Repeat for the three mushrooms. Fix the caps to the stems using a little glue. Allow to dry.

Step 31

Use a soft bristle brush and brown powder colouring to dust shadows on the stems.

Step 32

With brown gel colour diluted with clear alcohol paint the caps. Add layers of varying colour to give a velvet effect.

Step 33

Allow to dry and fix the three mushrooms to the cake. For the shiny cap effect you can use Saracino Liquid Shiny.

Step 34

For the coloured mushrooms: Use the coloured Pasta Model to create the mushroom stems. I find a Dresden tool helps at this stage.

Step 35

You will need to make three or four stems depending on how many mushrooms you want on your cake.

Step 36

As shown previously using a ball tool model the mushrooms caps using the red and blue Pasta Model.

Step 37

Make in different shapes and sizes.

Step 38

Paint the stems brown using Saracino brown colour gel diluted in clear alcohol.

Step 39

Fix the caps to the stems with a little Cake Gel.

Step 40

Paint the caps with blue and red gel colour.

Step 41

Make small pieces of sugar paste for the mushroom “spots”. They should not be circular and need to be irregular. Allow to dry.

Step 42

Insert a cocktail stick into the stem of the mushrooms. Fix to the top of the cake.

Step 43

Add the mushrooms wherever you would like them to be.

Step 44

Make little daisies or other flowers with a little white and yellow Pasta Top. I used a silicone mould, but a cutter will suffice.

Step 45

Print or paint butterflies on Saracino Wafer paper.

Step 46

Cut out the butterflies and glue them to a thin layer of Pasta Bouquet coloured with pale pink.

Step 47

Using a sharp knife cut out the butterflies.

Step 48

Smooth the edges to remove any rough cuts. Bend the butterflies at the centre and position to dry.

Step 49

For the moisture drops add Saracino isomalt to a silicone mould.

Step 50

Melt in a microwave and drip onto a silicone mat. Allow to harden.

Step 51

Glue the butterflies to the cake. Add the dew drop isomalt pearls.

Step 52

Your cake is ready. 

SUMMER FUN ON A BEACH MODELLING TUTORIAL

SUMMER FUN ON A BEACH MODELLING TUTORIAL

Skill level: INTERMEDIATE

You will need:

  • Saracino white Pasta Top
  • Saracino white Pasta Model
  • Saracino colouring gel: green, skin tone and brown
  • Saracino powder colour: orange, green, yellow
  • Destilled water
  • Edible glue
  • Thin soft brushes
  • Flower wire gauge 18
  • Wooden skewer
  • Rolling pin
  • Modelling tools
  • Scalpel or a sharp knife
  • 1 styrofoam ball

Step 1

Cover your styrofoam ball with Saracino Pasta Top.

Tip: If you want your piece to be entirely edible, make the ball out of Rice Krispie Mix.

Step 2

Mark a circle on the top of the ball by pressing the circel cutter gently on it.

Step 3

Mark the lines on the ball using your Drseden tool or similar.

Step 4

Paintthe ball using Saracino colouring gel mixed with distilled water.

Step 5

Cover your board with Saracino Pasta Top which has been coloured with yellow and a little brown Saracino gel colour. Don’t add too much brown otherwise it will be too dark. Trim the excess paste using a sharp knife.

Step 6

Place the ball in the centre of the board.

 

Step 7

Pin the ball to the board with a sharp wooden skewer to make secure. Cut the excess skewer with pliers.

Step 8

For the legs colour Saracino Pasta Model skin tone (or use pre-coloured skin tone) and roll with the palms of your hands to achieve a cylindrical shape.

Tip: Always try to use your palms more then your fingers, that way the piece will look smoother.

Step 9

Pinch in the middle to shape the knee.

Step 10

Pinch it again to form the ankle then fold back to form a foot.

Step 11

Bend the leg at the knee. Model and shape the foot using your modelling tools.

Step 12

For the body colour Pasta Model with a few drops of Saracino yellow colouring gel (or use pre-coloured paste). Roll a cylindrical shape then press it slightly in the middle to shape the waist.

Step 13

Using a ball tool form two shallow sockets at the bottom for the legs.

Step 14

Place the body on the top of the ball and insert the legs into the sockets made for them. Apply a little glue if necessary.

Tip: Don’t use too much edible glue as it can make the modelling paste too soft and sticky.

Step 15

Using a modelling tool create curved details on the swimming suit at the top of each leg. This adds to the model and also covers the joints.

Step 16

Using skin tone coloured Pasta Model roll two sausage shapes for the arms.

Step 17

Bend and pinch it in the middle to form the elbows. Press it at the end to form the flat palms. Cut the thumb and fingers with a knife or scalpel.

Step 18

Fix the arms to the shoulders using a little edible glue if needed.

Step 19

Use your fingers to smooth the fingers into shape. Using skin tone Pasta Model shape a neck and fix it on the top of the body.

Step 20

If the neck looks too long trim the top to the required length.

Step 21

For the watermelon prepare a small amount of fuchsia and light green modelling paste.

Step 22

Roll the green pasta model and cut out to an elongated leaf shape.

Step 23

Model the fuchsia paste to the shape of a watermelon slice. Fix the two parts together using a little edible glue. 

Step 24

Insert your gauge 18 flower wire through the body and the ball down to the board. Cut off any unnecessary wire. Leave enough wire to support the head.

Step 25

For the head use Saracino skin tone Pasta Model and roll a ball. Using your thumb or finger press it gently below the centre.

Tip: Always make the head slightly larger when modelling a cartoon or kids character. This way it looks cuter.

Step 26

Using your ball tool form two sockets for the eyes.

Step 27

Form the cheek definition. Use your fingers to push the head from each side.

Step 28

For the nose roll a small ball and place it in the centre of the face. Use a modelling tool to blend the joints and smooth it to a nose shape.

Step 29

Use a sharp tool to make nostrils.

Step 30

Using a sharp tool draw a line for the mouth.

Step 31

Using skin tone Pasta Model roll a thin small piece and attach it to the line to form the lower lip. Blend with a modelling tool.

Step 32

Use a Dresden tool to give the mouth a slightly open look.

Step 33

For the tongue roll a small ball of pink paste and fix inside the mouth.

Step 34

For the ears roll two small balls of skin tone Pasta Model. Squeeze each one between your fingers to flatten. Attach to each side of the head using a little edible glue.

Step 35

Use the small end of a ball tool to form the holes at the centre of each ear.

Step 36

For the eyes roll two small balls of white Pasta Model. Squeeze them until flat then insert them into the eye sockets.

Tip: To give a cuter look make the eyes slightly larger.

Step 37

Paint the eyes using Saracino colouring gel mixed with distilled water. Paint the eye pupils with black colouring gel.

Step 38

Using a little skin tone paste roll the eyelids and attach.

Step 39

Paint eyebrows and eyelashes using brown and black colouring gel.

Step 40

Paint white dots onto the eyes to give reflection. Roll a small piece of Saracino skin tone Pasta Model and attach it to the face for the chin. Use a modelling tool to smooth and shape a cute chin.

Step 41

Attach the head to the body using edible glue and place the watermelon slice into the girls hands.

Step 42

For the hair use brown Pasta Model and roll tear drop shapes.

Step 43

Fix the hair to the head using edible glue. Add hair texture with a sharp modelling tool by pressing each piece gently. Cover all the head with hair to achieve the look shown.

Step 44

For the pony tails roll two brown teardrop shapes. Roll two green balls for the hairbands.

Step 45

Shape and give texture to the pony tails and glue them on each side of the head. You can use a short lenght of flower wire to make them more stable if required. Roll the green balls to form a thin strand of paste and add to the pony tail for the hair band.

Step 46

Using yellow paste add a small frill detail to each shoulder. Using pink Saracino powder colour lightly dust the cheeks, elbows and knees.

Step 47

Paint black dots and green stripes on the watermelon slice.

Step 48

Using yellow Pasta Model form a bucket shape. Roll more yellow flat and cut a strip.

Step 49

Fix the strip around the top of the bucket. Add some textured paste to the top of the bucket to look like sand. Make a little yellow shovel handle and stick it into the sand using a flower wire.

Step 50

Make another little shovel from the orange ball.

Step 51

Using powder colours lightly dust the board and bucket to add character and depth.

Step 51

Add any seaside decoration of your choice. Your cute little girl is ready!

TROPICAL TOUCANS CUPCAKE TOPPERS

TROPICAL TOUCANS CUPCAKE TOPPERS

Author: SARAH BRAY

Skill level: BEGINNERS

You will need:

  • White Pasta Top Sugarpaste coloured with blue gel colour and treated with CMC

  • Saracino Pasta Model: black, yellow, orange (half yellow and half orange mixed), fuchsia, white, brown, green

  • Saracino edible dusts: orange, red, black, white

  • Saracino cocoa butter

  • Edible glue

  • Black edible pen

  • 58mm circle cutter

  • 30-32mm circle cutter

  • Small ball tool

  • Paintbrush

  • Sharp knife

  • Dresden tool

  • Small daisy plunger cutter

  • Petunia veiner (Blossom Sugar Art)

  • Smoother

  • Soft brush

Step 1

Roll out the blue Pasta Top and cut out four 58mm circles and set aside to dry completely.

Step 2

Roll a large cherry tomato sized piece of black modelling paste into a ball.

Step 3

Holding the piece in your hand use your finger to roll the paste back and forth in the middle to create the body of the toucan.

Step 4

Use your fingers to smooth off the top for his head.

Step 5

Cut a circle of white paste (approx. 30-32mm) and press onto the tummy and face of the toucan.

Step 6

Use a small ball tool to make a small egg-shaped dent for the colour of his eye (repeat on the other side for the other eye).

Step 7

Fill the dent with a small piece of orange paste.

Step 8

Make a little hole using the end of a paintbrush and fill with a tiny ball of black paste. Repeat for the second eye.

Step 9

To make his beak roll a teardrop shape of orange paste and a smaller yellow teardrop.

Step 10

Use your fingers to press both pieces onto the board to flatten the base.

Step 11

Push the two flat sides together to form the beak making sure that the larger orange piece is slightly overhanging the yellow piece.

Step 12

Cut the excess off with a sharp knife and stick onto the toucan’s face. Bend the tip of the top beak over the bottom slightly. At this point you may find that it won’t stand properly due to the weight of the beak, just put it aside on a piece of sponge until he’s attached to the topper.

Step 13

To make the feet roll three small teardrops of orange paste and push together at the pointed end. Repeat to make second foot.

Step 14

Using the toucan as a guide, stick the two feet onto the topper and glue his body on the top.

Step 15

To make the feathers on his head roll two small teardrops and push together, for his tail roll three slightly larger teardrops and push together and his wings a further two for each side. Stick all on to the toucan’s body.

Step 16

For his cocktail drink roll a small ball of yellow paste and flatten the base on the board.

Step 17

Cover this with a thin piece of white paste.

Step 18

Cover this with a thin piece of brown paste and use a Dresden tool to add lines for the coconut shell.

Step 19

Cut the excess paste away using a sharp knife.

Step 20

For the cocktail base roll another small ball of brown paste and flatten the base on the board. Add texture using a Dresden tool as before.

Step 21

Indent a hole in the yellow drink with the end of a paintbrush.

Step 22

Roll a thin piece of green paste for a straw, bend and set aside to dry.

Step 23

Stack the two coconuts on top of each other and glue to the topper. When the straw is dry enough to handle, cut to size and glue into cocktail. That is your Toucan Topper finished and ready to use.

Step 24

For the next topper roll a large marble size piece of orange paste into a ball and flatten the base on your board.

Step 25

To form the coconut look cover in a thin piece of white paste and then brown paste as before. Use a Dresden tool to mark lines of the coconut shell. Cut away the excess paste with a sharp knife as before. When cutting edges don’t do it in one smooth line as it looks less realistic. Lots of little cuts look much better.

Step 26

Use the end of your paintbrush to form a small hole ready for the straw.

Step 27

Roll a thin piece of green paste into a straw and set aside to dry.

Step 28

To make the watermelon roll a large marble sized piece of fuchsia paste and flatten the base on the board.

Step 29

Cover with a thin layer of white paste and then a thin layer of green paste. Cut around the edge as smoothly as possible using a sharp knife.

Step 30

With the flat side of the melon on the board, use a sharp knife to cut the melon in half and set aside to dry (keep the other part for later).

Step 31

Fix the coconut cocktail on to one of the toppers using edible glue.

Step 32

Cut out a variety of little flowers using a small blossom cutter and vein them.

Step 33

Stick two smaller flowers onto the topper and one onto the rim of the coconut.

Step 34

When it is dry enough to handle cut the straw to size and glue into the hole.

Step 35

Using an edible black pen mark seeds on the watermelon and glue this onto the topper.

Step 36

Create another toucan following the previous steps. Stick one foot onto the topper and attach the toucan’s body on top at a slight angle.

 Tip: If you flatten the base of the body on the board slightly it makes attaching it at an angle easier.

Step 37

Attach the second foot onto the body and push on using a paintbrush handle.

Step 38

To make the feathers on the head roll two small teardrops of black paste and push onto the top of the toucan’s head.

Step 39

To make the wings roll two small teardrop shapes for each and push onto the side bending them up slightly.

Step 40

Roll out several pieces of green paste and push them together at the thicker end. Repeat to make a second leaf.

Step 41

Stick these to the topper and decorate with a couple of small flowers made earlier.

Step 42

Add one little flower to the toucan’s head

Step 43

For the second cocktail roll a piece of yellow paste using a smoother so one end is narrower than the other. Using a sharp knife cut a piece approx. 3cm in length with a sharp knife. Use a smoother to reshape it if necessary.

Step 44

Using the end of a paintbrush make a small hole for the straw. Set aside to dry.

Step 45

With a soft brush gradually dust the bottom of the cocktail glass with orange dust upto about half way. Then apply a small amount of red dust to the very bottom.

Step 46

To make the straw roll a thin piece of fuchsia paste and bend over the top. Set aside to dry.

Step 47

Mark the seeds on the watermelon with a black edible pen as before. Attach the glass and melon to the topper with edible glue.

Step 48

Cut the straw to size and use a small amount of edible glue to attach it in the hole.

Step 49

Roll a small ball of fuchsia paste for a cherry and attach to the rim of the glass with a flower made earlier. Add another couple of flowers to the topper.

Step 50

Melt a small amount of cocoa butter. With black dust added paint the tip of the toucan’s beaks. Add a small amount of white dust to the cocoa butter and add highlights to the toucan’s eyes with a fine paintbrush.